Intelligent Heat Detector

The Intelligent Heat Detector, P/N 60-1039 & 60-1040, is a fixed temperature/rate-of-rise detector that can be programmed for a discrete set-point within the range of 135 to 170° F for ordinary detection, or 175 to 190° F for intermediate detection.

Detectors in the ordinary range may be programmed for either fixed temperature or 15° F rate-of-rise operation. Detectors in the ordinary range are programmed for fixed temperature only.

The detector is designed with tri-color LEDs to indicate detector status. A remote LED annunciator, P/N 02-3868, is available as an accessory.

It can be configured to follow the sensor LED operation or be independently controlled.

The isolator version, P/N 60-1040, provides complete short circuit isolation for NFPA 72, Class X wiring if used with an isolator base. The detector is compatible with Fike’s CyberCat and Cheetah Xi intelligent control panels.

Its operating parameters are configured using the panel’s programming software and are stored within non-volatile RAM in the detector.

This on-board intelligence allows each detector to communicate its status directly to other devices connected to the panel.

This peer-to-peer digital protocol results in less information that needs to be sent between the detector and the host control panel, resulting in faster, more reliable communication.