Yodify Product Library
Instantly add the PumpPAK Pump Controller and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
PumpPAK Pump Controller
Brand: MicroMod Automation & ControlsPumpPAK is suitable for many applications including waste water lift stations, pressurizing water lines, wet-well or other tank levels, pressure in a tank, tower or master header, or anywhere multiple pumps are used to control a level or pressure.
PumpPAK is a pre-engineered, pre-programmed controller designed for applications where multiple pumps are required to control level or pressure. Each PumpPAK controller supports up to three constant speed pumps or two variable speed pumps based on level or pressure.
FeaturesSpecifications
Accuracy
- ± 0.1 % of Span
- ± 0.2 % of Span
Ambient Temperature Range
- 4° to 52° C (40° to 125° F)
Approvals & Certifications
- IEC 529
Consumption
- Power: 36 W, Max.
Electrical Contacts
- Normally Closed
- Normally Open
Environmental Protection
- IP10
- IP20
- NEMA 1
Humidity
- 10 to 90 % Relative Humidity, Max.
Input
- Signal Range: 0-20 mA or 4-20 mA
Input Impedance
- 1 Megaohm
Load
- 0 to 750 ohms
Output
- Digital Output: 30 Vdc, Max.
- Digital Output: 50 mA Dc, Max.
- Ripple: 200 mV Peak-to-Peak, Max.
- Signal Range: 0-21.84 mA Dc (4-20 mA Dc Typically)
- Transmitter Power: 24-26 Vdc, 80 mA, Short Circuit Protected
Power
- 120-220 Vac
- 24 Vdc
Power Requirement
- 120 Vac ± 10 %, 50/60 Hz
- 21-28 Vdc
- 220-240 Vac ± 10 %, 50/60 Hz
Resistance
- Permissible Contact: 100 ohms, Max.
Resolution
- 12-bits