Yodify Product Library
Instantly add the MeCaWear© A5HT Polymer Coatings and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
MeCaWear© A5HT Polymer Coatings
Brand: Castolin EutecticMeCaWear© A5HT with Kevlar® is a high temperature resistant paste-grade polymer coating.
The two-part coating incorporates a high loading of alumina and silicon carbide within the resin and hardener system that when reacted, cures to provide a surface with outstanding wear protection.
MeCaTeC® A5HT is composed of four primary ingredients; a high performance polymer, silicon carbide particles, angular alumina particles and interlocking Kevlar® fiber.
MeCaWear© A5HT surface polymers have been formulated to allow for versatility in many applications, with no special tools and without the need for additional heat.
Plus, they are suitable for use on both new and worn parts. They can be “cast” into irregular shapes for use as a wear pad or wear plate.
Specifications
Brand
Color
- Gray
Mix Ratio
- 4:1 by volume
- 4:1 by weight
Sag Resistance (25 mils/6.3 mm)
- No Sag
Working Life (200g) (77° F / 25° C)
- 30 minutes
Low Temperature Application
- > 50° F (> 10° C)
Percent Solids
- 100%
Odor
- Slight to nil
Mixed Viscosity
- > 500,000 mPa•s (cP)
Mixed Density
- 2.39 g/ml
Maximum Operating Temperature
- Wet Service - 140° F (60° C)
- Dry Service - 329° F (165° C)
Cure Time
- Touch (77° F / 25° C) - 3 hours
- Handle (77° F / 25° C) - 11 hours
- Pipe Elbows
- Ash Handling Pipe
- Slurry Pumps
- Screw Conveyors
- Ceramic Tile Repair
- Duct Work
- Baghouse