Yodify Product Library
Instantly add the Model 566 Pressure Transmitter and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
Model 566 Pressure Transmitter
Brand: Delta Controls CorporationThe Delta Controls Model 566 Level Transmitter is a reliable head pressure type level transmitter.
The electronics and calibration adjustments are contained inside a remoted housing. The body protects the strain gage sensor. The cable is sealed to the sensor body.
When installed in a lift station, sump, basin or other containment, the strain gauge sensor determines the liquid level from the pressure exerted on it by the liquid height above it. Because the diaphragm is completely open to the product being measured, it cannot be plugged and rendered inoperable by liquids with high solids contents such as sewage, wastewater, and slurries.
The diaphragm is fabricated from tough rubber and is coupled to the strain gage through a nontoxic oil fill.
The abrasion resistant face has superior resistance to damage from gravel and other moving solids. Its large 3″ active size and its smooth outer surface make it extremely durable and reliable in harsh services. A vent tube connected directly to the sensor compensates automatically for changes in atmospheric pressure.
A desiccant filter or isolation bladder prevents condensation in the vent tube. The bladder does not require maintenance or refilling.
Features- Large, Rugged BUNA-N® Rubber Diaphragm Isolator For Wastewater And Slurries
- Supported By Rigid Pipe Or Cable
- 4-20 mADC, 2 Wire, Intrinsically Safe
- 316 Stainless Steel Or Hastelloy®"C"® Body
- PVC Or TEF Cable Jacket
- Zero & Span Pots For Field Recalibration
- Calibrate, Test From Electronic Module
- Spark & Voltage Surge Protection
- Top Side Housing Holds Electronics
- Field Repairable; Modular Design
- Can Be Used In Pressurized Tanks
- Large LCD; readout in engineering units
- DC Power Supply for loop and alarms in housing
- Alarm Module (1 or 2); SPDT, 5 amp contacts
- Liquid Temperature Transmitter; Operates over an additional 2-Wire, 4-20 mADC loop
- Pump Controller: Model 352, 354, 358 or 360
Specifications
Accuracy
- ± 0.25 % of Full Scale or Better
Adjustments
- Span from 30 % to 100 % of Sensor Range, Zero to 30 % Basic, Non-interactive.
Loop Impedance
- 550 ohms at 24 Vdc. 1100 ohms at 35 Vdc
Output
- 4-20 mADC Isolated, Intrinsically Safe
Over Pressure
- 2 x Rated Pressure Range, 35 psi (2.5 bar) Min.
Protective Devices
- Transient Suppressers for Voltage Surge
Supply Power
- 13 to 35 Vdc 2-Wire Loop-Powered
Technology
- Silicon Strain Gage
Temperature Range
- -20° to +180° F (-30° to +85° C) Electronics
- -20° to +220° F (-30° to +105° C) Process
- 30° to +130° F (-1° to +55° C) Compensated (Higher Available)
Thermal Error
- ± 0.02 % of Full Scale/°F Max.