Yodify Product Library
Instantly add the LTX20 Fuel Continous Capacitance Level Transmitter and 50,000+ more product series to your store or catalog  
Book Your Demo and See How
or create your store

LTX20 Fuel Continous Capacitance Level Transmitter

Brand: Intempco Controls, Inc

The Intempco LTX20 series fuel capacitance level transmitter is designed to measure level of fuels and oils in metallic and non-metallic tanks. 

The probe measures level by measuring the change in capacitance as level changes in the tank. 

The micro-processor based electronics converts this capacitance change into a linear, highly accurate 4-20 mA signal. 

The LTX20 includes a standard 4-20 mA loop-powered LTX transmitter, a concentric 0.75" (19 mm) diameter concentric shield with ranges up to 10 feet (3.04 meters). 

Probe material is SS316. The LTX20 is designed for tanks which have fitting connections of 3/4" NPT or larger and in applications where the liquid is relatively clean or non-clogging. 

An excellent application for the LTX20 are stationary or mobile generators. This level sensor is shock resistant and very rugged. There are no moving parts. 

To isolate for ground loops, a non-conductive reducer ( such as PVC ) can be used between the tank and the 3/4" NPT fitting of the LTX20.
Features
  • For fuel, oil tanks
  • OEM applications, low cost
  • Compact 3/4" NPT concentric tube design
  • Accuracy 1% of span for constant dielectric of material
  • Tube and inner probe SS316
  • For use with metallic and non-metallic tanks
  • Continuous loop-powered 4-20 mA operation

1 - 1 of 1 Part Numbers
LTX20 FUEL
LTX20 FUEL
  • Electronic Module - LTX1A 4-20 mA Output Loop-Powered (Installed in Enclosure)
  • Enclosure - Aluminum Flip Cover - 1/2" NPT Conduit
  • Fitting - Male Pipe Size - 3/4" NPT
  • Probe Materials - 316 Stainless Steel Bare Solid Probe
  • Probe Length - 6 Custom Probe Length in Inches
1 - 1 of 1 Part Numbers

Specifications

Accuracy

  • ± 1 % of Full Span (Constant Dielectric)

Ambient Temperature Range

  • -40° to 70° C (-40° to 158° F)

Calibration

  • Via 4 Push-Button Switches Non-interactive Settings

Capacitance

  • 10 to 10,000 PF

Conduit Connection

  • 3/4” NPT Female

Damping Adjustment

  • 0 to 30 seconds

Diameter

  • Tube O.D.: 3/4” (19 mm)

Enclosure, Body Material

  • 316 Stainless Steel
  • Aluminum Flip-Cover
  • Cast Stainless Steel

Environmental Protection

  • IP66
  • NEMA 4
  • NEMA 4X

Loop Resistance

  • 700 ohms at 24 Vdc, Max.

Materials of Construction

  • Tube Material: 316 Stainless Steel

Media

  • Fuel

Mounting

  • DIN Rail Module (Installed Remotelly)

NPT Connection

  • 3/4” NPT Male

Output

  • 4-20 mA, Loop Powered

Pressure Range

  • bar: 1 to 34
  • kPa: 100 to 3,400
  • psi: 14.5 to 500

Process Temperature

  • 200° C (392° F) - Max.

Repeatability

  • ± 0.1 % of Span

Sensor, Probe Diameter

  • Probe O.D.: 3/4” (19 mm)

Sensor, Probe Length

  • Probe: 6 to 240” (152.4 to 6,096 mm)

Sensor, Probe Material

  • Probe: 316 Stainless Steel

Supply Voltage

  • 12-36 Vdc

  • Diesel Fuels
  • Hydraulic Oils
  • Vegetable Oils
  • Chemical Holding Tanks
  • MEK and Other Solvants
  • Many Other, Non-Conductive Liquids.
  • Do Not Use With: Water and Other Conductive Liquids, Conductive Acids, Materials Corrosive to SS316
Instantly populate your store or catalog 
CREATE YOUR SITE
or book a demo with the Yodify Team
show more