Create Site
Book a Demo

Demo Sites

Agriculture Instrumentation Industrial Equipment Automation HVAC Electronics Medical & Pharmaceutical Renewables Commercial & Residential Retail & Grocery Wholesale
Create Site
Book a Demo
Pricing
Create Free Partner Portal Now
Book Partner Orientation
Yodify Product Library
Instantly add the Series I2-1 Immersion Temperature Probe and 50,000+ more product series to your store or catalog  
Book Your Demo and See How
or create your store
Dwyer Immersion Temperature Probe, Series I2-1

Series I2-1 Immersion Temperature Probe

Brand: Dwyer Instruments, LLC
Add Product to My Catalog

Dwyer Immersion Temperature Probe, Series I2-1
The Series I2-1 Immersion Temperature Probes are designed to monitor the hot and chilled water lines throughout a building's water distribution loop.

The multiple temperature sensor outputs allow these sensors to connect to virtually any digital building controller. 

The Series IW2 stainless steel thermowells allow the temperature sensors to be replaced without draining the water line.

The temperature sensors are available in 4" and 6" insertion lengths.

Note: A Series IW2 Thermowell must be used on pressurized air and water lines to prevent leakage around the probe.
Features
  • Direct Wall Mounting
  • 6' cable
  • 1/2" Internal NPT Accepts Conduit for more Industrial Installation

1 - 12 of 23 Part Numbers
I2-11042
I2-11042
  • Sensor Type - Pt100 Ohm RTD
  • Insertion Length - 4"
I2-11062
I2-11062
DWYER Immersion Temperature Sensor, 6" Insertion Length, Pt 100 Ω Sensor.
  • Sensor Type - Pt100 Ohm RTD
  • Insertion Length - 6"
I2-12042
I2-12042
  • Sensor Type - Pt1000 Ohm RTD
  • Insertion Length - 4"
I2-12062
I2-12062
DWYER Immersion Temperature Sensor, 6" Insertion Length, PT 1000 Ω Sensor.
  • Sensor Type - Pt1000 Ohm RTD
  • Insertion Length - 6"
I2-13042
I2-13042
  • Sensor Type - Ni1000 Ohm RTD
  • Insertion Length - 4"
I2-13062
I2-13062
DWYER Immersion Temperature Sensor, 6" Insertion Length, Ni 1000 Ω Sensor.
  • Sensor Type - Ni1000 Ohm RTD
  • Insertion Length - 6"
I2-14042
I2-14042
  • Sensor Type - 1000 Ohm Balco RTD
  • Insertion Length - 4"
I2-14062
I2-14062
DWYER Immersion Temperature Sensor, 6" Insertion Length, Balco 1000 Ω Sensor.
  • Sensor Type - 1000 Ohm Balco RTD
  • Insertion Length - 6"
I2-15042
I2-15042
  • Sensor Type - 10k Ohm Type II Thermistor
  • Insertion Length - 4"
I2-15062
I2-15062
DWYER Immersion Temperature Sensor, 6" Insertion Length, 10K Ω NTC Type 2 Thermistor.
  • Sensor Type - 10k Ohm Type II Thermistor
  • Insertion Length - 6"
I2-16042
I2-16042
  • Sensor Type - 3k Ohm Thermistor
  • Insertion Length - 4"
I2-16062
I2-16062
DWYER Immersion Temperature Sensor, 6" Insertion Length, 3K Ω NTC Thermistor.
  • Sensor Type - 3k Ohm Thermistor
  • Insertion Length - 6"
1 - 12 of 23 Part Numbers

View_Details

Specifications

Brand

Accuracy

  • ± 0.1 % @ 32° F (0° C) - Balco RTD
  • ± 0.2° C (± 0.36° F) from 0° to 70° C (32 to 158° F) - Thermistors
  • ± 0.28° C (± 0.5° F) at 32° F (0° C) - Nickel RTD
  • ± 0.6 % at 32° F (0° C) - Platinum RTD

Cable Length

  • 6 ft

Insertion 'U' Length

  • 4” (10.1 cm)
  • 6” (15.2 cm)

Mounting

  • 1/2” Threaded Connection to Fit Series IW2 Thermowell

Operating Temperature

  • -35.5° to 115.5° C (-32° to 240° F)

Sensor / Probe Diameter

  • 1/4” (6.3 mm)

Sensor / Probe Material

  • 304 Stainless Steel

Sensor / Probe Type

  • RTD - Pt100 ohms, PT1,000 ohms, Ni1,000 ohms, Balco 1,000 ohms
  • Thermistor - 10 kiloohms (Typical 2, Typical 3) kiloohms, 5 kiloohms, 100 kiloohms, 20 kiloohms, 2252 ohms

  • Hot or Chilled Water Line Monitoring
  • HVAC and Building Automation Systems

Documentation

Catalogs

Instantly populate your store or catalog 
CREATE YOUR SITE
or book a demo with the Yodify Team
show more