Yodify Product Library
Instantly add the U1000MKII-FM Fixed Clamp-on, Ultrasonic Flow Meter and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
U1000MKII-FM Fixed Clamp-on, Ultrasonic Flow Meter
Brand: Micronics LtdThe New ULTRAFLO U1000MKII-FM is a Fixed, clamp-on, pipe mounted, ultrasonic flow meter, which delivers significant installation savings and non-invasive, dry servicing benefits for pipe sizes ranging from 22mm – 180mm (6″) OD.
Features- New: Larger Pipe Range 2 Options, Fully Adjustable For 22Mm – 115Mm And 125Mm – 180Mm (6″) OD
- New: Optional Modbus RTU Slave, RS485 Serial And M-Bus Communication
- New: Cross Correlation Flow Measurement System
- New: 1Mhz Transducers To Get Through Poor/Old Thick Wall Pipes And Larger Pipework
- New: Water/Glycol Option
- Simple To Install: Connect Power And Enter The Pipe Inside Diameter, Adjust The Sensors And Clamp-On The Pipe, No Specialist Skills Or Tools Required
- A Clamp-On Non-Invasive Alternative To Traditional In-Line Meter Installation, Plus Dry Servicing, Providing Minimum Downtime And Maximum Availability.
- LCD With Backlight – Install & Service Information.
- Integrated Pulse And Optional 4-20MA Output – AM&T & BEM’S Compatible With Modbus.
Specifications
Brand
Measurement Technique
- Utrasonic, cross-correlation transit time method for flow measurement.
Turn Down Ratio
- 100:1
Accuracy
- ± 1 % - 3 % of flow reading for > 0.3 m/s (> 1 ft/s).
Flow Velocity Range
- 0.1 m/s - 10 m/s (0.3 ft/s - 32 ft/s),
Pipe Range
- Available in 2 options. 22 mm - 115 mm and 125 mm - 180 mm O.D.. Note Pipe size dependent on pipe material and internal diameter.
Pipe Material
- Steel, Stainless Steel, Plastic and Copper
Water Temp Range
- 0° C - 85° C (32° F - 185° F).
Pulse Output
- Pulse or Frequency. Pulse for volume flow and alarms. Frequency for flow rate. The pulse output can be configured as loss of signal or low flow alarm. Opto-Isolated MOSFET volt free contact [NO/NC].
4-20 mA Output
- Optional 4-20 mA flow proportional output. Resolution 0.1 % of full scale. Max. load 620 Ω.
Modbus Communication
- Pipe Mounted:- Optional Modbus RTU slave, RS-485 serial link hardware layer. Connection cable 1M.
M-Bus Communication
- Optional M-Bus
External Power Supply
- 12 V-24 V ± 10 % AC/DC at 7 watts. Optional plug in 12 V power supply
Electronics Enclosure
- IP54
Input/Output Cable
- 5 m x 6 core for power in, 4-20 mA and pulse output.
Dimensions
- 250 mm x 48 mm x 90 mm [10″ x 2″ x 4″] {electronics + guide rail).