Yodify Product Library
Instantly add the HPC50 Series Pressure Calibrator and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
HPC50 Series Pressure Calibrator
Brand: Crystal Engineering by AmetekThe HPC50 handheld pressure calibrator is an intrinsically safe, dual pressure calibrator with options to add an additional two external pressure or temperature modules.
The HPC50 pressure calibrator combines the features you love from the HPC40 with improvements like, better battery life an improved display, an extra external module connection, and of course intrinsic safety.
The HPC50 series pressure calibrator is fully temperature compensated for pressure, temperature, and electrical measurements from -20 to 50°C.
Features- 0.035% of Reading Accuracy
- Gauge, Absolute, and Differential Pressure to 10,000 psi / 700 bar / 70 MPa
- Advanced Simplicity "Non-Menu" Interface
- Measure Sink mA and V
- High Accuracy Thermometer with "True Ohm" Technology
- Store & Recall Previously Used Screens
Specifications
Accuracy (psi - Gauge Pressure)
- 18 to 28° C -- 0 to 30 % of Range: ± (0.01 % of FS | 30 to 110 % of Range: ± (0.035 % of Reading) | Vacuum*: ± (0.05 % of FS**)
- -20 to 50° C -- 0 to 30 % of Range: ± (0.015 % of FS | 30 to 110 % of Range: ± (0.050 % of Reading) | Vacuum*: ± (0.05 % of FS**)
- * Applies to 300 psi and lower ranges only. Vacuum Range = -14.5 psi
- ** Full Scale is numerical value of the positive pressure range
Accuracy, PSIA (Absolute Pressure with BARO Option)
- All absolute accuracies are equivalent to the gauge pressure accuracies, except as noted below.
- 15 psi Range: Gauge Accuracy +0.005 psia
- 30 psi Range: Gauge Accuracy +0.005 psia
- 100 psi Range: Gauge Accuracy +0.002 psia
Pressure Sensor
- Wetted Materials: (Wrench Tight) 316 Stainless Steel / (Finger Tight) 316 Stainless Steel and Viton with Internal O-Ring (10 psi/1 bar/100 kPa) 316 Stainless Steel and Viton
- Diaphragm Seal Fluid: Silicone Oil
- Connection: Crystal CPF Female
Barometric Reference
- Accuracy: ± 0.00725 psi, ± 0.5 mbar
- Range: 10.153 to 15.954 psia, 700.0 to 1100.0 mbarA
- Units and Resolution: psi - 0.001 / inHg - 0.001 / mmHg - 0.01 / mbar - 0.1
Current & Voltage Measurement
- Connection: 4 mm jacks
Current (mA) Input
- Accuracy: ± (0.015 % of Reading + 0.002 mA)
- mA Range: 0 to 55 mA
- Percent Range: 0-20, 4-20, 10-50
- Maximum Allowable Current: 93.3 mA
- Resolution: 0.001 mA or 0.01 %
- Units: mA, scaling, % error, and % flow
- Input Resistance: < 4.99 Ω
- Voltage Burden @ 20 mA: < 0.10 V
- Voltage Burden @ 50 mA: < 0.250 V
- HART Resistor: 250 Ω
Current (mA) Sink
- Accuracy: ± (0.015 of Reading + 0.002 mA)
- Range: 0 to 25 mA [From 0.001 to 0.05 mA, add 0.02 mA to accuracy]
- Step Time: 1 to 999 seconds
- Ramp Time: 5 to 999 seconds
Voltage (VDC) Input
- Accuracy: ± (0.015 % of Reading + 2 mV)
- Range: 0 to 28 Vdc
- Resolution: 0.001 Vdc
Switch Test
- Switch Type: Dry Contact
- Closed State Resistance: 100 KΩ
- Sample Rate: 10 Hz
Data/Communication
- Digital Interface: mini-USB
Display
- Screen: 320 x 240 pixel Graphical Display
- Display Rate: 3 readings/second (Standard)
Power
- Cell Voltage: 1.5 V (Alkaline Batteries)
Battery Life
- No External Modules: 35 Hours
- One External Module: 25 Hours
- Two External Modules: 12 Hours
Enclosure
- Weight: 567 g (20.0 oz.)
- Rating: IP66/67
- Housing: PC/PBT Plastic
- Keypad and Labels: UV Resistant Silicone
Operating Temperature
- Temperature Range: -20° to 50° C (-4° to 122° F)
Storage Temperature
- Temperature Range: -40° to 75° C (-40° to 167° F)