Temperature Transmitter Series 9182

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 80.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.90 W
• Voltage range residual ripple - ≤ 3,6 VSS

Electrical Data

• Input potentiometer - up to 100 kΩ
• Input resistance temperature detector (RTD) - Types Pt 100, Pt 500, Pt 1000, Ni 100, Ni 500, Ni 1000
• Input resistance temperature detector (RTD) Type of circuit - 2-, 3-, 4-wire circuit
• Input thermocouple - Types B, E, J, K, N, R, S, T, L, U, XK
• Number of channels - 2

Explosion Protection

• Application range (zones) - 2, 22
• ATEX dust certificate - DMT 02 ATEX E 243 X
• ATEX gas certificate - DMT 02 ATEX E 243 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM), USA (UL)
• Dust explosion protection ATEX - II (1) D [Ex ia Da] IIIC
• Dust explosion protection EAC - [Ex ia Da] IIIC
• Dust explosion protection IECEx - [Ex ia Da] IIIC
• Ex interface in Division NEC 500 - (Class I, II, III) 1, 2
• Ex interface zone - 0, 1, 2, 20, 21, 22
• Gas explosion protection ATEX - II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA nC [ia Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA nC [ia Ga] IIC T4 Gc
• IECEX dust certificate - IECEx BVS 09.0046 X
• IECEX gas certificate - IECEx BVS 09.0046 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - 9182 series Ex i temperature transmitters for field circuits can be used to connect temperature sensors and potentiometers. They are easy to configure for virtually any sensor type by means of software or a DIP switch. These sensor types include Pt100 sensors, thermocouples and potentiometers. Variants with a trip amplifier function allow the input signal to be analysed using two independent contacts.
• Highlights - Ex i temperature transmitter, can be configured for virtually any common sensor type broad range, including variants with signal conversion and trip amplifier function can be used up to SIL 2 (IEC/EN 61508)
• Product Description - Temperature transmitter Ex i field circuit ISpac
• Product Type - 9182/20-51-11s
• Title Product Variant Technical Data - 9182/20-51-11s temperature transmitter
• WebCode - 9182A

Input

• Input for resistance temperature detector - See table
• Message of line fault and Auxilliary power failure - - Contact (30 V / 100 mA) closed to ground in case of fault - pac-Bus, floating contact (30 V / 100 mA)

Mechanical Data

• Connection cross-section - 0.2-2.5 mm² flexible 0.2-2.5 mm² rigid 0.25-2.5 mm² flexible core end sleeve
• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 17.60 mm
• Terminal degree of protection (IP) - IP20
• Weight - 0.195 kg

Mounting / Installation

• Connection type - Screw terminal
• Mounting position - horizontal vertical
• Mounting type - DIN rail (NS35/15, NS35/7.5)

Output

• LFD relay - Yes
• Limit contact (per channel) - without
• Load resistance R L max. - 600.00 Ω
• Output - 0/4 ... 20 mA active / source
• Output functional range - 0.0 - 21.0 mA
• output signal - 0/4 - 20 mA (configurable)
• Response time output - ≤ 500 ms
• Settling time output - ≤ 35 ms
• Switching capacity fault message contact - 30 V / 100 mA

Safety Data

• Internal capacitance C i - negligible
• Internal inductance L i - negligible
• Max. Current I o - 19.7 mA
• Max. Power P o - 32.000 mW
• Max. Voltage U o - 6.50 V
• Safety-related maximum voltage - 253 V

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 80.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.90 W
• Voltage range residual ripple - ≤ 3,6 VSS

Electrical Data

• Input potentiometer - up to 100 kΩ
• Input resistance temperature detector (RTD) - Types Pt 100, Pt 500, Pt 1000, Ni 100, Ni 500, Ni 1000
• Input resistance temperature detector (RTD) Type of circuit - 2-, 3-, 4-wire circuit
• Input thermocouple - Types B, E, J, K, N, R, S, T, L, U, XK
• Number of channels - 2

Explosion Protection

• Application range (zones) - 2, 22
• ATEX dust certificate - DMT 02 ATEX E 243 X
• ATEX gas certificate - DMT 02 ATEX E 243 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM), USA (UL)
• Dust explosion protection ATEX - II (1) D [Ex ia Da] IIIC
• Dust explosion protection EAC - [Ex ia Da] IIIC
• Dust explosion protection IECEx - [Ex ia Da] IIIC
• Ex interface in Division NEC 500 - (Class I, II, III) 1, 2
• Ex interface zone - 0, 1, 2, 20, 21, 22
• Gas explosion protection ATEX - II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA nC [ia Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA nC [ia Ga] IIC T4 Gc
• IECEX dust certificate - IECEx BVS 09.0046 X
• IECEX gas certificate - IECEx BVS 09.0046 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - 9182 series Ex i temperature transmitters for field circuits can be used to connect temperature sensors and potentiometers. They are easy to configure for virtually any sensor type by means of software or a DIP switch. These sensor types include Pt100 sensors, thermocouples and potentiometers. Variants with a trip amplifier function allow the input signal to be analysed using two independent contacts.
• Highlights - Ex i temperature transmitter, can be configured for virtually any common sensor type broad range, including variants with signal conversion and trip amplifier function can be used up to SIL 2 (IEC/EN 61508)
• Product Description - Temperature transmitter Ex i field circuit ISpac
• Product Type - 9182/20-51-11k
• Title Product Variant Technical Data - 9182/20-51-11k temperature transmitter
• WebCode - 9182A

Input

• Input for resistance temperature detector - See table
• Message of line fault and Auxilliary power failure - - Contact (30 V / 100 mA) closed to ground in case of fault - pac-Bus, floating contact (30 V / 100 mA)

Mechanical Data

• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 17.60 mm
• Terminal degree of protection (IP) - IP20
• Weight - 0.195 kg

Mounting / Installation

• Connection type - Spring clamp terminal
• Mounting position - horizontal vertical
• Mounting type - NS35/15, NS35/7.5 DIN rail

Output

• LFD relay - Yes
• Limit contact (per channel) - without
• Load resistance R L max. - 600.00 Ω
• Output - 0/4 ... 20 mA active / source
• Output functional range - 0.0 - 21.0 mA
• output signal - 0/4 - 20 mA (configurable)
• Response time output - ≤ 500 ms
• Settling time output - ≤ 35 ms
• Switching capacity fault message contact - 30 V / 100 mA

Safety Data

• Internal capacitance C i - negligible
• Internal inductance L i - negligible
• Max. Current I o - 19.7 mA
• Max. Power P o - 32.000 mW
• Max. Voltage U o - 6.50 V
• Safety-related maximum voltage - 253 V

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 70.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.90 W
• Voltage range residual ripple - ≤ 3,6 VSS

Electrical Data

• Input potentiometer - up to 100 kΩ
• Input resistance temperature detector (RTD) - Types Pt 100, Pt 500, Pt 1000, Ni 100, Ni 500, Ni 1000
• Input resistance temperature detector (RTD) Type of circuit - 2-, 3-, 4-wire circuit
• Input thermocouple - Types B, E, J, K, N, R, S, T, L, U, XK
• Number of channels - 1

Explosion Protection

• Application range (zones) - 2, 22
• ATEX dust certificate - DMT 02 ATEX E 243 X
• ATEX gas certificate - DMT 02 ATEX E 243 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM), USA (UL)
• Dust explosion protection ATEX - II (1) D [Ex ia Da] IIIC
• Dust explosion protection EAC - [Ex ia Da] IIIC
• Dust explosion protection IECEx - [Ex ia Da] IIIC
• Ex interface in Division NEC 500 - (Class I, II, III) 1, 2
• Ex interface zone - 0, 1, 2, 20, 21, 22
• Gas explosion protection ATEX - II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA nC [ia Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA nC [ia Ga] IIC T4 Gc
• IECEX dust certificate - IECEx BVS 09.0046 X
• IECEX gas certificate - IECEx BVS 09.0046 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - 9182 series Ex i temperature transmitters for field circuits can be used to connect temperature sensors and potentiometers. They are easy to configure for virtually any sensor type by means of software or a DIP switch. These sensor types include Pt100 sensors, thermocouples and potentiometers. Variants with a trip amplifier function allow the input signal to be analysed using two independent contacts.
• Highlights - Ex i temperature transmitter, can be configured for virtually any common sensor type broad range, including variants with signal conversion and trip amplifier function can be used up to SIL 2 (IEC/EN 61508)
• Product Description - Temperature transmitter Ex i field circuit ISpac
• Product Type - 9182/10-51-11s
• Title Product Variant Technical Data - 9182/10-51-11s temperature transmitter
• WebCode - 9182A

Input

• Input for resistance temperature detector - See table
• Message of line fault and Auxilliary power failure - - Contact (30 V / 100 mA) closed to ground in case of fault - pac-Bus, floating contact (30 V / 100 mA)

Mechanical Data

• Connection cross-section - 0.2-2.5 mm² flexible 0.2-2.5 mm² rigid 0.25-2.5 mm² flexible core end sleeve
• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 17.60 mm
• Terminal degree of protection (IP) - IP20
• Weight - 0.195 kg

Mounting / Installation

• Connection type - Screw terminal
• Mounting position - vertical horizontal
• Mounting type - DIN rail (NS35/15, NS35/7.5)

Output

• LFD relay - Yes
• Limit contact (per channel) - without
• Load resistance R L max. - 750.00 Ω
• Output - 0/4 ... 20 mA active / source
• Output functional range - 0.0 - 21.0 mA
• output signal - 0/4 - 20 mA (configurable)
• Response time output - ≤ 500 ms
• Settling time output - ≤ 35 ms
• Switching capacity fault message contact - 30 V / 100 mA

Safety Data

• Internal capacitance C i - negligible
• Internal inductance L i - negligible
• Max. Current I o - 19.7 mA
• Max. Power P o - 32.000 mW
• Max. Voltage U o - 6.50 V
• Safety-related maximum voltage - 253 V

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 70.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.90 W
• Voltage range residual ripple - ≤ 3,6 VSS

Electrical Data

• Input potentiometer - up to 100 kΩ
• Input resistance temperature detector (RTD) - Types Pt 100, Pt 500, Pt 1000, Ni 100, Ni 500, Ni 1000
• Input resistance temperature detector (RTD) Type of circuit - 2-, 3-, 4-wire circuit
• Input thermocouple - Types B, E, J, K, N, R, S, T, L, U, XK
• Number of channels - 1

Explosion Protection

• Application range (zones) - 2, 22
• ATEX dust certificate - DMT 02 ATEX E 243 X
• ATEX gas certificate - DMT 02 ATEX E 243 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM), USA (UL)
• Dust explosion protection ATEX - II (1) D [Ex ia Da] IIIC
• Dust explosion protection EAC - [Ex ia Da] IIIC
• Dust explosion protection IECEx - [Ex ia Da] IIIC
• Ex interface in Division NEC 500 - (Class I, II, III) 1, 2
• Ex interface zone - 0, 1, 2, 20, 21, 22
• Gas explosion protection ATEX - II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA nC [ia Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA nC [ia Ga] IIC T4 Gc
• IECEX dust certificate - IECEx BVS 09.0046 X
• IECEX gas certificate - IECEx BVS 09.0046 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - 9182 series Ex i temperature transmitters for field circuits can be used to connect temperature sensors and potentiometers. They are easy to configure for virtually any sensor type by means of software or a DIP switch. These sensor types include Pt100 sensors, thermocouples and potentiometers. Variants with a trip amplifier function allow the input signal to be analysed using two independent contacts.
• Highlights - Ex i temperature transmitter, can be configured for virtually any common sensor type broad range, including variants with signal conversion and trip amplifier function can be used up to SIL 2 (IEC/EN 61508)
• Product Description - Temperature transmitter Ex i field circuit ISpac
• Product Type - 9182/10-51-11k
• Title Product Variant Technical Data - 9182/10-51-11k temperature transmitter
• WebCode - 9182A

Input

• Input for resistance temperature detector - See table
• Message of line fault and Auxilliary power failure - - Contact (30 V / 100 mA) closed to ground in case of fault - pac-Bus, floating contact (30 V / 100 mA)

Mechanical Data

• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 17.60 mm
• Terminal degree of protection (IP) - IP20
• Weight - 0.195 kg

Mounting / Installation

• Connection type - Spring clamp terminal
• Mounting position - vertical horizontal
• Mounting type - NS35/15, NS35/7.5 DIN rail

Output

• LFD relay - Yes
• Limit contact (per channel) - without
• Load resistance R L max. - 750.00 Ω
• Output - 0/4 ... 20 mA active / source
• Output functional range - 0.0 - 21.0 mA
• output signal - 0/4 - 20 mA (configurable)
• Response time output - ≤ 500 ms
• Settling time output - ≤ 35 ms
• Switching capacity fault message contact - 30 V / 100 mA

Safety Data

• Internal capacitance C i - negligible
• Internal inductance L i - negligible
• Max. Current I o - 19.7 mA
• Max. Power P o - 32.000 mW
• Max. Voltage U o - 6.50 V
• Safety-related maximum voltage - 253 V

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 70.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.90 W
• Voltage range residual ripple - ≤ 3,6 VSS

Electrical Data

• Input potentiometer - up to 100 kΩ
• Input resistance temperature detector (RTD) - Types Pt 100, Pt 500, Pt 1000, Ni 100, Ni 500, Ni 1000
• Input resistance temperature detector (RTD) Type of circuit - 2-, 3-, 4-wire circuit
• Input thermocouple - Types B, E, J, K, N, R, S, T, L, U, XK
• Number of channels - 1

Explosion Protection

• Application range (zones) - 2, 22
• ATEX dust certificate - DMT 02 ATEX E 243 X
• ATEX gas certificate - DMT 02 ATEX E 243 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM), USA (UL)
• Dust explosion protection ATEX - II (1) D [Ex ia Da] IIIC
• Dust explosion protection EAC - [Ex ia Da] IIIC
• Dust explosion protection IECEx - [Ex ia Da] IIIC
• Ex interface in Division NEC 500 - (Class I, II, III) 1, 2
• Ex interface zone - 0, 1, 2, 20, 21, 22
• Gas explosion protection ATEX - II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA nC [ia Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA nC [ia Ga] IIC T4 Gc
• IECEX dust certificate - IECEx BVS 09.0046 X
• IECEX gas certificate - IECEx BVS 09.0046 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - 9182 series Ex i temperature transmitters for field circuits can be used to connect temperature sensors and potentiometers. They are easy to configure for virtually any sensor type by means of software or a DIP switch. These sensor types include Pt100 sensors, thermocouples and potentiometers. Variants with a trip amplifier function allow the input signal to be analysed using two independent contacts.
• Highlights - Ex i temperature transmitter, can be configured for virtually any common sensor type broad range, including variants with signal conversion and trip amplifier function can be used up to SIL 2 (IEC/EN 61508)
• Product Description - Temperature transmitter Ex i field circuit ISpac
• Product Type - 9182/10-51-12s
• Title Product Variant Technical Data - 9182/10-51-12s temperature transmitter
• WebCode - 9182A

Input

• Input for resistance temperature detector - See table
• Message of line fault and Auxilliary power failure - - Contact (30 V / 100 mA) closed to ground in case of fault - pac-Bus, floating contact (30 V / 100 mA)

Mechanical Data

• Connection cross-section - 0.2-2.5 mm² flexible 0.2-2.5 mm² rigid 0.25-2.5 mm² flexible core end sleeve
• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 17.60 mm
• Terminal degree of protection (IP) - IP20
• Weight - 0.195 kg

Mounting / Installation

• Connection type - Screw terminal
• Mounting position - vertical horizontal
• Mounting type - DIN rail (NS35/15, NS35/7.5)

Output

• LFD relay - Yes
• Limit contact (per channel) - 2 NO / NC
• Load resistance R L max. - 750.00 Ω
• Output - 0/4 ... 20 mA active / source
• Output functional range - 0.0 - 21.0 mA
• output signal - 0/4 - 20 mA (configurable)
• Response time output - ≤ 500 ms
• Settling time output - ≤ 35 ms
• Switching capacity fault message contact - 30 V / 100 mA
• Switching current limiting values - ≤ 100 mA
• Switching voltage limiting values - ≤ ± 30 V

Safety Data

• Internal capacitance C i - negligible
• Internal inductance L i - negligible
• Max. Current I o - 19.7 mA
• Max. Power P o - 32.000 mW
• Max. Voltage U o - 6.50 V
• Safety-related maximum voltage - 253 V

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 70.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.90 W
• Voltage range residual ripple - ≤ 3,6 VSS

Electrical Data

• Input potentiometer - up to 100 kΩ
• Input resistance temperature detector (RTD) - Types Pt 100, Pt 500, Pt 1000, Ni 100, Ni 500, Ni 1000
• Input resistance temperature detector (RTD) Type of circuit - 2-, 3-, 4-wire circuit
• Input thermocouple - Types B, E, J, K, N, R, S, T, L, U, XK
• Number of channels - 1

Explosion Protection

• Application range (zones) - 2, 22
• ATEX dust certificate - DMT 02 ATEX E 243 X
• ATEX gas certificate - DMT 02 ATEX E 243 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM), USA (UL)
• Dust explosion protection ATEX - II (1) D [Ex ia Da] IIIC
• Dust explosion protection EAC - [Ex ia Da] IIIC
• Dust explosion protection IECEx - [Ex ia Da] IIIC
• Ex interface in Division NEC 500 - (Class I, II, III) 1, 2
• Ex interface zone - 0, 1, 2, 20, 21, 22
• Gas explosion protection ATEX - II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA nC [ia Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA nC [ia Ga] IIC T4 Gc
• IECEX dust certificate - IECEx BVS 09.0046 X
• IECEX gas certificate - IECEx BVS 09.0046 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - 9182 series Ex i temperature transmitters for field circuits can be used to connect temperature sensors and potentiometers. They are easy to configure for virtually any sensor type by means of software or a DIP switch. These sensor types include Pt100 sensors, thermocouples and potentiometers. Variants with a trip amplifier function allow the input signal to be analysed using two independent contacts.
• Highlights - Ex i temperature transmitter, can be configured for virtually any common sensor type broad range, including variants with signal conversion and trip amplifier function can be used up to SIL 2 (IEC/EN 61508)
• Product Description - Temperature transmitter Ex i field circuit ISpac
• Product Type - 9182/10-51-12k
• Title Product Variant Technical Data - 9182/10-51-12k temperature transmitter
• WebCode - 9182A

Input

• Input for resistance temperature detector - See table
• Message of line fault and Auxilliary power failure - - Contact (30 V / 100 mA) closed to ground in case of fault - pac-Bus, floating contact (30 V / 100 mA)

Mechanical Data

• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 17.60 mm
• Terminal degree of protection (IP) - IP20
• Weight - 0.195 kg

Mounting / Installation

• Connection type - Spring clamp terminal
• Mounting position - vertical horizontal
• Mounting type - NS35/15, NS35/7.5 DIN rail

Output

• LFD relay - Yes
• Limit contact (per channel) - 2 NO / NC
• Load resistance R L max. - 750.00 Ω
• Output - 0/4 ... 20 mA active / source
• Output functional range - 0.0 - 21.0 mA
• output signal - 0/4 - 20 mA (configurable)
• Response time output - ≤ 500 ms
• Settling time output - ≤ 35 ms
• Switching capacity fault message contact - 30 V / 100 mA
• Switching current limiting values - ≤ 100 mA
• Switching voltage limiting values - ≤ ± 30 V

Safety Data

• Internal capacitance C i - negligible
• Internal inductance L i - negligible
• Max. Current I o - 19.7 mA
• Max. Power P o - 32.000 mW
• Max. Voltage U o - 6.50 V
• Safety-related maximum voltage - 253 V

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 70.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.90 W
• Voltage range residual ripple - ≤ 3,6 VSS

Electrical Data

• Input potentiometer - up to 100 kΩ
• Input resistance temperature detector (RTD) - Types Pt 100, Pt 500, Pt 1000, Ni 100, Ni 500, Ni 1000
• Input resistance temperature detector (RTD) Type of circuit - 2-, 3-, 4-wire circuit
• Input thermocouple - Types B, E, J, K, N, R, S, T, L, U, XK
• Number of channels - 1

Explosion Protection

• Application range (zones) - 2, 22
• ATEX dust certificate - DMT 02 ATEX E 243 X
• ATEX gas certificate - DMT 02 ATEX E 243 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM)
• Dust explosion protection ATEX - II (1) D [Ex ia Da] IIIC
• Dust explosion protection EAC - [Ex ia Da] IIIC
• Dust explosion protection IECEx - [Ex ia Da] IIIC
• Ex interface in Division NEC 500 - (Class I, II, III) 1, 2
• Ex interface zone - 0, 1, 2, 20, 21, 22
• Gas explosion protection ATEX - II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA nC [ia Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA nC [ia Ga] IIC T4 Gc
• IECEX dust certificate - IECEx BVS 09.0046 X
• IECEX gas certificate - IECEx BVS 09.0046 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - 9182 series Ex i temperature transmitters for field circuits can be used to connect temperature sensors and potentiometers. They are easy to configure for virtually any sensor type by means of software or a DIP switch. These sensor types include Pt100 sensors, thermocouples and potentiometers. Variants with a trip amplifier function allow the input signal to be analysed using two independent contacts.
• Highlights - Ex i temperature transmitter, can be configured for virtually any common sensor type broad range, including variants with signal conversion and trip amplifier function can be used up to SIL 2 (IEC/EN 61508)
• Product Description - Temperature transmitter Ex i field circuit ISpac
• Product Type - 9182/10-51-13s
• Title Product Variant Technical Data - 9182/10-51-13s temperature transmitter
• WebCode - 9182A

Input

• Input for resistance temperature detector - See table
• Message of line fault and Auxilliary power failure - - Contact (30 V / 100 mA) closed to ground in case of fault - pac-Bus, floating contact (30 V / 100 mA)

Mechanical Data

• Connection cross-section - 0.2-2.5 mm² flexible 0.2-2.5 mm² rigid 0.25-2.5 mm² flexible core end sleeve
• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 17.60 mm
• Terminal degree of protection (IP) - IP20
• Weight - 0.170 kg

Mounting / Installation

• Connection type - Screw terminal
• Mounting position - vertical horizontal
• Mounting type - DIN rail (NS35/15, NS35/7.5)

Output

• LFD relay - Yes
• Limit contact (per channel) - without
• Load resistance R L max. - 750.00 Ω
• Output - 0/4 ... 20 mA active / source
• Output functional range - 0.0 - 21.0 mA
• output signal - 0/4 - 20 mA (configurable)
• Response time output - ≤ 500 ms
• Settling time output - ≤ 35 ms
• Switching capacity fault message contact - 30 V / 100 mA

Safety Data

• Max. Current I o - 19.7 mA
• Max. Power P o - 32.000 mW
• Max. Voltage U o - 6.50 V
• Safety-related maximum voltage - 253 V

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 70.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.90 W
• Voltage range residual ripple - ≤ 3,6 VSS

Electrical Data

• Input potentiometer - up to 100 kΩ
• Input resistance temperature detector (RTD) - Types Pt 100, Pt 500, Pt 1000, Ni 100, Ni 500, Ni 1000
• Input resistance temperature detector (RTD) Type of circuit - 2-, 3-, 4-wire circuit
• Input thermocouple - Types B, E, J, K, N, R, S, T, L, U, XK
• Number of channels - 1

Explosion Protection

• Application range (zones) - 2, 22
• ATEX dust certificate - DMT 02 ATEX E 243 X
• ATEX gas certificate - DMT 02 ATEX E 243 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM)
• Dust explosion protection ATEX - II (1) D [Ex ia Da] IIIC
• Dust explosion protection EAC - [Ex ia Da] IIIC
• Dust explosion protection IECEx - [Ex ia Da] IIIC
• Ex interface in Division NEC 500 - (Class I, II, III) 1, 2
• Ex interface zone - 0, 1, 2, 20, 21, 22
• Gas explosion protection ATEX - II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA nC [ia Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA nC [ia Ga] IIC T4 Gc
• IECEX dust certificate - IECEx BVS 09.0046 X
• IECEX gas certificate - IECEx BVS 09.0046 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - 9182 series Ex i temperature transmitters for field circuits can be used to connect temperature sensors and potentiometers. They are easy to configure for virtually any sensor type by means of software or a DIP switch. These sensor types include Pt100 sensors, thermocouples and potentiometers. Variants with a trip amplifier function allow the input signal to be analysed using two independent contacts.
• Highlights - Ex i temperature transmitter, can be configured for virtually any common sensor type broad range, including variants with signal conversion and trip amplifier function can be used up to SIL 2 (IEC/EN 61508)
• Product Description - Temperature transmitter Ex i field circuit ISpac
• Product Type - 9182/10-51-13k
• Title Product Variant Technical Data - 9182/10-51-13k temperature transmitter
• WebCode - 9182A

Input

• Input for resistance temperature detector - See table
• Message of line fault and Auxilliary power failure - - Contact (30 V / 100 mA) closed to ground in case of fault - pac-Bus, floating contact (30 V / 100 mA)

Mechanical Data

• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 17.60 mm
• Terminal degree of protection (IP) - IP20
• Weight - 0.170 kg

Mounting / Installation

• Connection type - Spring clamp terminal
• Mounting position - horizontal vertical
• Mounting type - NS35/15, NS35/7.5 DIN rail

Output

• LFD relay - Yes
• Limit contact (per channel) - without
• Load resistance R L max. - 750.00 Ω
• Output - 0/4 ... 20 mA active / source
• Output functional range - 0.0 - 21.0 mA
• output signal - 0/4 - 20 mA (configurable)
• Response time output - ≤ 500 ms
• Settling time output - ≤ 35 ms
• Switching capacity fault message contact - 30 V / 100 mA

Safety Data

• Max. Current I o - 19.7 mA
• Max. Power P o - 32.000 mW
• Max. Voltage U o - 6.50 V
• Safety-related maximum voltage - 253 V

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 70.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.90 W
• Voltage range residual ripple - ≤ 3,6 VSS

Electrical Data

• Input potentiometer - up to 100 kΩ
• Input resistance temperature detector (RTD) - Types Pt 100, Pt 500, Pt 1000, Ni 100, Ni 500, Ni 1000
• Input resistance temperature detector (RTD) Type of circuit - 2-, 3-, 4-wire circuit
• Input thermocouple - Types B, E, J, K, N, R, S, T, L, U, XK
• Number of channels - 1

Explosion Protection

• Application range (zones) - 2, 22
• ATEX dust certificate - DMT 02 ATEX E 243 X
• ATEX gas certificate - DMT 02 ATEX E 243 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM)
• Dust explosion protection ATEX - II (1) D [Ex ia Da] IIIC
• Dust explosion protection EAC - [Ex ia Da] IIIC
• Dust explosion protection IECEx - [Ex ia Da] IIIC
• Ex interface in Division NEC 500 - (Class I, II, III) 1, 2
• Ex interface zone - 0, 1, 2, 20, 21, 22
• Gas explosion protection ATEX - II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA nC [ia Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA nC [ia Ga] IIC T4 Gc
• IECEX dust certificate - IECEx BVS 09.0046 X
• IECEX gas certificate - IECEx BVS 09.0046 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - 9182 series Ex i temperature transmitters for field circuits can be used to connect temperature sensors and potentiometers. They are easy to configure for virtually any sensor type by means of software or a DIP switch. These sensor types include Pt100 sensors, thermocouples and potentiometers. Variants with a trip amplifier function allow the input signal to be analysed using two independent contacts.
• Highlights - Ex i temperature transmitter, can be configured for virtually any common sensor type broad range, including variants with signal conversion and trip amplifier function can be used up to SIL 2 (IEC/EN 61508)
• Product Description - Temperature transmitter Ex i field circuit ISpac
• Product Type - 9182/10-59-13s
• Title Product Variant Technical Data - 9182/10-59-13s temperature transmitter
• WebCode - 9182A

Input

• Input for resistance temperature detector - See table
• Message of line fault and Auxilliary power failure - - Contact (30 V / 100 mA) closed to ground in case of fault - pac-Bus, floating contact (30 V / 100 mA)

Mechanical Data

• Connection cross-section - 0.2-2.5 mm² flexible 0.2-2.5 mm² rigid 0.25-2.5 mm² flexible core end sleeve
• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 17.60 mm
• Terminal degree of protection (IP) - IP20
• Weight - 0.170 kg

Mounting / Installation

• Connection type - Screw terminal
• Mounting position - vertical horizontal
• Mounting type - DIN rail (NS35/15, NS35/7.5)

Output

• LFD relay - Yes
• Limit contact (per channel) - without
• Load resistance R L max. - 750.00 Ω
• Output - 0/4 ... 20 mA passive / sink
• output signal - 0/4 ... 0 mA pas./sink (con.)
• Response time output - ≤ 500 ms
• Settling time output - ≤ 35 ms
• Switching capacity fault message contact - 30 V / 100 mA

Safety Data

• Max. Current I o - 19.7 mA
• Max. Power P o - 32.000 mW
• Max. Voltage U o - 6.50 V
• Safety-related maximum voltage - 253 V

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 70.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.90 W
• Voltage range residual ripple - ≤ 3,6 VSS

Electrical Data

• Input potentiometer - up to 100 kΩ
• Input resistance temperature detector (RTD) - Types Pt 100, Pt 500, Pt 1000, Ni 100, Ni 500, Ni 1000
• Input resistance temperature detector (RTD) Type of circuit - 2-, 3-, 4-wire circuit
• Input thermocouple - Types B, E, J, K, N, R, S, T, L, U, XK
• Number of channels - 1

Explosion Protection

• Application range (zones) - 2, 22
• ATEX dust certificate - DMT 02 ATEX E 243 X
• ATEX gas certificate - DMT 02 ATEX E 243 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM)
• Dust explosion protection ATEX - II (1) D [Ex ia Da] IIIC
• Dust explosion protection EAC - [Ex ia Da] IIIC
• Dust explosion protection IECEx - [Ex ia Da] IIIC
• Ex interface in Division NEC 500 - (Class I, II, III) 1, 2
• Ex interface zone - 0, 1, 2, 20, 21, 22
• Gas explosion protection ATEX - II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA nC [ia Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA nC [ia Ga] IIC T4 Gc
• IECEX dust certificate - IECEx BVS 09.0046 X
• IECEX gas certificate - IECEx BVS 09.0046 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - 9182 series Ex i temperature transmitters for field circuits can be used to connect temperature sensors and potentiometers. They are easy to configure for virtually any sensor type by means of software or a DIP switch. These sensor types include Pt100 sensors, thermocouples and potentiometers. Variants with a trip amplifier function allow the input signal to be analysed using two independent contacts.
• Highlights - Ex i temperature transmitter, can be configured for virtually any common sensor type broad range, including variants with signal conversion and trip amplifier function can be used up to SIL 2 (IEC/EN 61508)
• Product Description - Temperature transmitter Ex i field circuit ISpac
• Product Type - 9182/10-59-13k
• Title Product Variant Technical Data - 9182/10-59-13k temperature transmitter
• WebCode - 9182A

Input

• Input for resistance temperature detector - See table
• Message of line fault and Auxilliary power failure - - Contact (30 V / 100 mA) closed to ground in case of fault - pac-Bus, floating contact (30 V / 100 mA)

Mechanical Data

• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 17.60 mm
• Terminal degree of protection (IP) - IP20
• Weight - 0.205 kg

Mounting / Installation

• Connection type - Spring clamp terminal
• Mounting position - horizontal vertical
• Mounting type - NS35/15, NS35/7.5 DIN rail

Output

• LFD relay - Yes
• Limit contact (per channel) - without
• Load resistance R L max. - 750.00 Ω
• Output - 0/4 ... 20 mA passive / sink
• output signal - 0/4 ... 0 mA pas./sink (con.)
• Response time output - ≤ 500 ms
• Settling time output - ≤ 35 ms
• Switching capacity fault message contact - 30 V / 100 mA

Safety Data

• Max. Current I o - 19.7 mA
• Max. Power P o - 32.000 mW
• Max. Voltage U o - 6.50 V
• Safety-related maximum voltage - 253 V

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 70.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.90 W
• Voltage range residual ripple - ≤ 3,6 VSS

Electrical Data

• Input potentiometer - up to 100 kΩ
• Input resistance temperature detector (RTD) - Types Pt 100, Pt 500, Pt 1000, Ni 100, Ni 500, Ni 1000
• Input resistance temperature detector (RTD) Type of circuit - 2-, 3-, 4-wire circuit
• Input thermocouple - Types B, E, J, K, N, R, S, T, L, U, XK
• Number of channels - 1

Explosion Protection

• Application range (zones) - 2, 22
• ATEX dust certificate - DMT 02 ATEX E 243 X
• ATEX gas certificate - DMT 02 ATEX E 243 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM)
• Dust explosion protection ATEX - II (1) D [Ex ia Da] IIIC
• Dust explosion protection EAC - [Ex ia Da] IIIC
• Dust explosion protection IECEx - [Ex ia Da] IIIC
• Ex interface in Division NEC 500 - (Class I, II, III) 1, 2
• Ex interface zone - 0, 1, 2, 20, 21, 22
• Gas explosion protection ATEX - II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA nC [ia Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA nC [ia Ga] IIC T4 Gc
• IECEX dust certificate - IECEx BVS 09.0046 X
• IECEX gas certificate - IECEx BVS 09.0046 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - 9182 series Ex i temperature transmitters for field circuits can be used to connect temperature sensors and potentiometers. They are easy to configure for virtually any sensor type by means of software or a DIP switch. These sensor types include Pt100 sensors, thermocouples and potentiometers. Variants with a trip amplifier function allow the input signal to be analysed using two independent contacts.
• Highlights - Ex i temperature transmitter, can be configured for virtually any common sensor type broad range, including variants with signal conversion and trip amplifier function can be used up to SIL 2 (IEC/EN 61508)
• Product Description - Temperature transmitter Ex i field circuit ISpac
• Product Type - 9182/10-51-14s
• Title Product Variant Technical Data - 9182/10-51-14s temperature transmitter
• WebCode - 9182A

Input

• Input for resistance temperature detector - See table
• Message of line fault and Auxilliary power failure - - Contact (30 V / 100 mA) closed to ground in case of fault - pac-Bus, floating contact (30 V / 100 mA)

Mechanical Data

• Connection cross-section - 0.2-2.5 mm² flexible 0.2-2.5 mm² rigid 0.25-2.5 mm² flexible core end sleeve
• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 17.60 mm
• Terminal degree of protection (IP) - IP20
• Weight - 0.170 kg

Mounting / Installation

• Connection type - Screw terminal
• Mounting position - vertical horizontal
• Mounting type - DIN rail (NS35/15, NS35/7.5)

Output

• LFD relay - Yes
• Limit contact (per channel) - 2 NO / NC
• Load resistance R L max. - 750.00 Ω
• Output - 0/4 ... 20 mA active / source
• Output functional range - 0.0 - 21.0 mA
• output signal - 0/4 - 20 mA (configurable)
• Response time output - ≤ 500 ms
• Settling time output - ≤ 35 ms
• Switching capacity fault message contact - 30 V / 100 mA
• Switching current limiting values - ≤ 100 mA
• Switching voltage limiting values - ≤ ± 30 V

Safety Data

• Max. Current I o - 19.7 mA
• Max. Power P o - 32.000 mW
• Max. Voltage U o - 6.50 V
• Safety-related maximum voltage - 253 V

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 70.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.90 W
• Voltage range residual ripple - ≤ 3,6 VSS

Electrical Data

• Input potentiometer - up to 100 kΩ
• Input resistance temperature detector (RTD) - Types Pt 100, Pt 500, Pt 1000, Ni 100, Ni 500, Ni 1000
• Input resistance temperature detector (RTD) Type of circuit - 2-, 3-, 4-wire circuit
• Input thermocouple - Types B, E, J, K, N, R, S, T, L, U, XK
• Number of channels - 1

Explosion Protection

• Application range (zones) - 2, 22
• ATEX dust certificate - DMT 02 ATEX E 243 X
• ATEX gas certificate - DMT 02 ATEX E 243 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), Korea (KTL), Russia (Meteorological certificate), SIL (exida), USA (FM)
• Dust explosion protection ATEX - II (1) D [Ex ia Da] IIIC
• Dust explosion protection EAC - [Ex ia Da] IIIC
• Dust explosion protection IECEx - [Ex ia Da] IIIC
• Ex interface in Division NEC 500 - (Class I, II, III) 1, 2
• Ex interface zone - 0, 1, 2, 20, 21, 22
• Gas explosion protection ATEX - II 3 (1) G Ex nA nC [ia Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA nC [ia Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA nC [ia Ga] IIC T4 Gc
• IECEX dust certificate - IECEx BVS 09.0046 X
• IECEX gas certificate - IECEx BVS 09.0046 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - 9182 series Ex i temperature transmitters for field circuits can be used to connect temperature sensors and potentiometers. They are easy to configure for virtually any sensor type by means of software or a DIP switch. These sensor types include Pt100 sensors, thermocouples and potentiometers. Variants with a trip amplifier function allow the input signal to be analysed using two independent contacts.
• Highlights - Ex i temperature transmitter, can be configured for virtually any common sensor type broad range, including variants with signal conversion and trip amplifier function can be used up to SIL 2 (IEC/EN 61508)
• Product Description - Temperature transmitter Ex i field circuit ISpac
• Product Type - 9182/10-51-14k
• Title Product Variant Technical Data - 9182/10-51-14k temperature transmitter
• WebCode - 9182A

Input

• Input for resistance temperature detector - See table
• Message of line fault and Auxilliary power failure - - Contact (30 V / 100 mA) closed to ground in case of fault - pac-Bus, floating contact (30 V / 100 mA)

Mechanical Data

• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 17.60 mm
• Terminal degree of protection (IP) - IP20
• Weight - 170.000 kg

Mounting / Installation

• Connection type - Spring clamp terminal
• Mounting position - horizontal vertical
• Mounting type - NS35/15, NS35/7.5 DIN rail

Output

• LFD relay - Yes
• Limit contact (per channel) - 2 NO / NC
• Load resistance R L max. - 750.00 Ω
• Output - 0/4 ... 20 mA active / source
• Output functional range - 0.0 - 21.0 mA
• output signal - 0/4 - 20 mA (configurable)
• Response time output - ≤ 500 ms
• Settling time output - ≤ 35 ms
• Switching capacity fault message contact - 30 V / 100 mA
• Switching current limiting values - ≤ 100 mA
• Switching voltage limiting values - ≤ ± 30 V

Safety Data

• Max. Current I o - 19.7 mA
• Max. Power P o - 32.000 mW
• Max. Voltage U o - 6.50 V
• Safety-related maximum voltage - 253 V