Yodify Product Library
Instantly add the LTX01 Continuous Capacitance Level Transmitter and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
LTX01 Continuous Capacitance Level Transmitter
Brand: Intempco Controls, Inc
INTEMPCO LTX01 series 2-wire level transmitters are highly reliable microprocessor based sensors designed to measure tank levels of liquids and certain dry bulk media in metal tanks.
LTX01 sensors measure the change in capacitance that occurs as the tank level changes and outputs a standard loop-powered 4-20 mA signal.
After calibration any change in level is recognized and converted to an Analog 4-20 mA signal.
LTX01 sensors use very high frequency and very low amplitude sensing circuitry to greatly minimize the effects of coating on the sensing probe.
The LTX01 includes a standard 4-20 mA loop-powered LTX transmitter housed in a rugged enclosure, a 0.50" (12.7 mm) diameter rigid probe for ranges up to 20 feet (6.09 meters) and a mounting fitting.
A remote mounted DIN Rail transmitter is also available when calibration at enclosure is not practical.
Probe material is SS316, supplied bare or PFA Teflon jacketed. The LTX01 is designed for tanks which have fitting connections of 1/2" NPT or larger.
Features- Continuous loop-powered 4-20 mA operation
- Microprocessor based
- Accuracy 1% of span for constant dielectric of material
- Non-interactive zero and span calibration
- Calibration accomplished with 4 push buttons
- Heavy duty industrial design
- NEMA rated aluminum, stainless, PVC and explosion proof housings available
- Standard fitting 3/4" NPT, flange and special fittings available
1 - 1 of 1 Part Numbers
LTX01
- Electronic Module - 4-20 mA, 2-Wire Output Module Installed in Enclosure
- Enclosure - Aluminum Explosion-Proof - 1/2" NPT Conduit
- Fitting - 3/4" Male NPT
- Probe Materials - PFA Teflon Clad (For Conductive & Non-Conductive Liquids)
- Probe Length - 6 Custom Probe Length in Inches
1 - 1 of 1 Part Numbers
Specifications
Brand
Accuracy
- ± 1 % of Full Span (Constant Dielectric)
Ambient Temperature Range
- -40° to 70° C (-40° to 158° F)
Calibration
- Via 4 Push-Button Switches Non-interactive Settings
Capacitance
- 10 to 10,000 PF
Conduit Connection
- 1/2” NPT Female
- 3/4” NPT Female
- PG9 Gland
Damping Adjustment
- 0 to 30 seconds
Enclosure, Body Material
- Aluminum Flip-Cover
- Cast Stainless Steel
- Machined 316 Stainless Steel
- PVC
Environmental Protection
- Explosion-proof Class I, Div. 1, Groups B, C & D, Class II, III, Div. 1, Groups E, F, G
- IP66
- IP68
- NEMA 4
- NEMA 4X
Flange Material
- 316 Stainless Steel
Flange Size - 1-1/2” (DN 40)
- 1-1/2” (DN 40) - 150#
Flange Size - 2-1/2” (DN 65)
- 2-1/2” (DN 65) - 150#
Flange Size - 2” (DN 50)
- 2” (DN 50) - 150#
Flange Size - 3” (DN 80)
- 3” (DN 80) - 150#
Flange Size - 4” (DN 100)
- 4” (DN 100) - 150#
Flange Size - 5” (DN 125)
- 5” (DN 125) - 150#
Flange Size - 6” (DN 150)
- 6” (DN 150) - 150#
Flange Type
- Raised Face (RF)
Loop Resistance
- 700 ohms at 24 Vdc, Max.
Mounting
- Remote Mounted DIN Rail Module
NPT Connection
- 1” NPT Male
- 1/2” NPT Male
- 1-1/2” NPT Male
- 1-1/4” NPT Male
- 2” NPT Male
- 3/4” NPT Male
Output
- 4-20 mA, Loop Powered
Pressure Range
- bar: 1 to 34
- kPa: 100 to 3,400
- psi: 14.5 to 500
Process Temperature
- 200° C (392° F) - Max.
Repeatability
- ± 0.1 % of Span
Sensor, Probe Length
- Probe: 6 to 240” (152.4 to 6,096 mm)
Sensor, Probe Material
- Probe: Bare 316 Stainless Steel
- Probe: PFA Teflon Jacketed
Supply Voltage
- 12-30 Vdc
- Water and Water-Based Liquids.
- Jacketed Probes Required for Conductive Media
- Organic Acids
- Oils and Fuels in Some Metallic Tanks
- Use Bare Probes With Non-Conductive Media
- Use Cable Probes Where Top Side Access is Limited
- On-Site Calibration Required
- Not Recommended Where Material Dielectric Changes
- Tank must be Conducive or Grounding May be Required or see Other Intempco Level Probes.