Yodify Product Library
Instantly add the ACM-1 Transmitter/Controller and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
ACM-1 Transmitter/Controller
Brand: KOBOLD Instruments, IncThe compact KOBOLD transmitter / controller ACM-1 measures the conductivity value, TDS value or specific resistance. It is avail- able as panel-mounted device according to DIN/EN 61554 or as field housing.
Measured values and parameters are displayed on a high-contrast graphic display in plain text. Easy configuration via buttons or PC with optional software provide a simple and user friendly operation.
An integrated math and logic module enables the integration of the measured values in mathematical formulas so that the measured variables can be displayed. The transmitter has two Analog and two binary inputs.
Specifications
Brand
Accuracy
- ± 5 ohms
- ≤ 0.05 % (Resistance ± 4 ohms) - Optional Board Standard Signal
- ≤ 0.25 % of Measuring Range - Temperature Pt100/Pt1000
- ≤ 0.5 % - Optional Board Analog Output
- ≤ 0.6 % of Measuring Range + 0.3 µS x Cell Constant (K) - Conductivity Value
- ≤ 1.5 % of Measuring Range - Temperature NTC/PTC
- 0.25 % of Measuring Range - Standard Signal
Ambient Temperature Range
- -5° to 50° C (23° to 122° F) - Field Housing
- -5° to 55° C (23° to 131° F) - Panel Mounting
Circuit Protection
- Varistor - Optional Board Semiconductor Relay TRIAC
Communication
- Baud Rate: 9,600, 19,200, 38,400 bit/sec (RS-422/485)
- Modbus
- PROFIBUS DP
- RS-422, RS-485
Consumption
- 13 VA, Max.
Display
- 122 x 32 Pixel LCD Graphic Display (Blue with Backlight)
Electrical Connectors
- 14 AWG (2.5 mm²)
- Screw Terminal - Rear
Electrical Contacts
- Changeover Contact - Optional Board 1 Relay
Electrical Rating
- 1 A at 240 Vac Resistive - Optional Board Semiconductor Relay TRIAC (Output)
- 3 A at 240 Vac Resistive - Optional Board Double Relay (Output)
- 5 A at 240 Vac Resistive Load - Optional Board 2 Relay (Output)
- 8 A at 240 Vac Resistive - Optional Board 1 Relay (Output)
- U ≤ 50 Vac/Vdc - Optional Board 2 Semiconductor Relay Photo-MOS
Enclosure, Body Material
- Aluminum
- Plastic - for Panel Mounting According to DIN IEC 61554
Environmental Protection
- IP20 - Rear
- IP65 - Front & Field Housing
Humidity
- ≤ 90 % Relative Humidity Annual Mean, Non-Condensing
Input
- 0-10 V - Standard Signal Measuring Control Range
- 0-20 mA - Standard Signal Measuring Control Range
- 4-20 mA - Standard Signal Measuring Control Range
- PTC/NTC 0.1 to 30 kiloohms - Measuring & Control Range
Load Impedance
- ≤ 500 ohms - Optional Board Analog Output
Mounting
- Panel Mount
Mounting Position
- Horizontal
Output
- ± 5 Vdc, 5 mA - Optional Boards Supply ISFET
- 0(2)-10 V - Optional Board Analog Output
- 0(4)-20 mA - Optional Board Analog Output
- 12 Vdc, 10 mA - Optional Boards Supply Proximity Switch
- 2 Relay (Changeover Contact)
Power Requirement
- 110-240 Vac
- -15 / +10 %, 48 to 63 Hz - Standard
- 20-30 Vac/Vdc, 48 to 63 Hz - Special
Resistance
- 100 ohms to 3 kiloohms
Sensor / Probe Connection
- 2-Wire
Storage Temperature
- -30° to 70° C (-22° to 158° F)
Supply Voltage
- ± 5 Vdc - Sensor
- 12 Vdc - Sensor
- 17 Vdc at 20 mA - Sensor
- Approximately 25 Vdc - Open-Circuit Voltage
Temperature Effect
- 0.1 %/10 K - Resistance Transmitter
- 0.2 %/10 K
- 100 ppm/K - Optional Board Standard Signal
Temperature Range
- -50° to 250° C (-58° to 482° F)