Yodify Product Library
Instantly add the Custom Pitless Units - NSF 61 Certified and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
Custom Pitless Units - NSF 61 Certified
Brand: Baker Water Systems DivisionFabricated from the highest quality materials, the Monitor Custom Pitless Unit is a safe and sanitary method of completing a Municipal / Industrial water well.
The Monitor Custom Pitless Unit attaches to the well casing and provides a sanitary underground discharge to the water treatment facility.
The spool and discharge body are constructed of high strength cold-rolled steel. Using lead-free zinc, the spool and discharge body are galvanized for long term corrosion protection.
Upon request, the Monitor Custom Fabricated Pitless Units can be fabricated from stainless steel. Our Custom Pitless Units are available for the following well diameters: 10”, 12”, 14”, 16”, 18”, 20”, 22”, 24”, 26”, 28”, 30”, and 36”.
Monitor Custom Pitless Units are shipped as complete factory pressure tested pitless unit including the Watertight Premium Well Cap, Upper Bury Depth Casing Extension, Discharge Body, Spool, Discharge and Drop Connection, Lift-Out Bail, and Hold-Down Assembly.
Available options: epoxy coating, API drop pipe and discharge threads, cap cable seals, flowing well spools, locking seal caps, flanged upper casing, water sampler valves, wire seals, dual zone pitless with recharge lines, probe tubes, and additional conduit entrance connections for signal wires.
All units are available in Stainless Steel upon request.
Features- Corrosion Protection – all water passages are either hot-dipped lead free galvanized or constructed of corrosion resistant material
- O-ring Seal Protection – Monitor seal protection prevents seal damage during installation and service.
- Frost Proof – No Heating is required. All water passages are below the frost line.
- Quick to Install – A quality pump installation can be made easily and economically without delay for masonry or building construction
- Easy to Service – Well cap can be removed without disconnecting cables. O-ring seals on spool permit withdrawal of the entire inner assembly simply by lifting. Replacement is equally simple. Spool support eliminates vertical adjustment and any possibility of dropping the inner assembly into the wall.
- Reliable Seals – Neoprene O-Rings between accurately machined hot-dipped lead free galvanized surfaces on the spool and within the unit provide positive seals.
- Watertight Well Cap With Screened Air Vent and Locking Bolts – Designed to permit removal without disconnecting cables. Separate junction box is eliminated. Watertight cable and conduit sealing is optional
- Hold-Down – Supplied with each unit. Hold-down pipe also serves as lift-out pipe for installation and servicing.
- Support Rings – Prevent distortion of the Discharge Body due to vertical movement of Discharge Pipe
- Locking Bolts
- Lift-Out Bail
- Depth Test Blocks
- Protected Screened Vent
- Probe Tube
- Flowing Well Units (available for most well sizes)
- Water Sampling Valve-Frost Proof (optional)
Specifications
Pitless Unit to Well Casting Connection
- Chambered for butt weld
Pitless Unit with Black Upper Case
- 13-1/8 in. I.D., 14 in. O.D
- 15-1/4 in. I.D., 16 in. O.D
- 17-1/4 in. I.D., 18 in. O.D
- 19-1/4 in. I.D., 20 in. O.D
- 21 in. I.D., 22 in. O.D.
- 25 in. I.D., 26 in. O.D
- 27 in. I.D., 28 in. O.D.
- 35 in. I.D., 36 in. O.D.
Discharge Body Minimum Internal Diameter
- 10”
- 13-1/4”
- 15-1/4”
- 19”
- 23”
- 25”
- 29”
Hold-Down Mechanism
- Locks spool in place and prevents lifting and turning during pump start-up. Two adjustable hooks on lift-out pipe hook into side of pitless case
Probe Tube
- Standard 1 in. PVC pipe
Lift-Out Pipe
- 4 in. NPT with standard lift-out ball
- 5 in. NPT with standard lift-out ball
- 6 in. IPS with standard lift-out ball
- 8 in. IPS with standard lift-out ball
Lift-Out Bail
- Lift-out pipe and bail assembly designed for a 218,000 lb load
- Lift-out pipe and bail assembly designed for a 142,000 lb load
- Lift-out pipe and bail assembly designed for a 68,000 lb load
- Lift-out pipe and bail assembly designed for a 110,000 lb load
- 2 in. NPT Tapping
- 2-1/2 in. NPT Tapping
Well Vent
- Screws into a 2-1/2 in. NPT Tapping
Conduit Tapping
- 2 in. and 1 in. Standard Also available in single 2 in., 3 in., or 4 in. NPT. All Tapping sizes available with or without electrical cable seal
Depth Tester Block Tappings
- 1/4 in. NPT Std.
Pressure Zone Tapping
- 3/8” NPT
Dimension from Center of Discharge to Bottom of Discharge Body
- 15-3/4”
- 11-1/16”
- 13-3/4”
- 17-1/2”
- 17-7/16”
Distance from Ground Level to Top of Pitless Case
- 12”
Distance from Ground Level to Top of Vent Cap
- 28-1/2”
- 28-5/16”
- 28-1/4”
- 29-7/16”
- 30-13/16”
- 32-11/16”
Component Materials
- Tank & Inlet Pipes- Steel, Black Corrosion Resistant Coating
- Cap - Cast Iron, Green Enamel Finish
- Conduit Box - Steel, Black Corrosion Resistant Coating
- Combination Hold-Down & Lift Out Mechanism - Lead-free Galvanized
- Hold-down Pipe - Steel, Corrosion Resistant Coating
- Discharge Body -Steel, Lead-free Galvanized/Ductile or Cast-Iron, Lead-free Galvanized
- Pitless Case - Steel, Corrosion Resistant Coating
- Spool - Steel, Lead-free Galvanized
- Probe tube - 1” PVC
- Conduit Seal & O-Rings - Neoprene
- Note: - Inlet pipe & tank pepe tested to 200 P.S.I., spool discharge pressure tested to 300 P.S.I.
- Note: - Any combination between Drop Pipe and Discharge Outles size is possible, if required