Yodify Product Library
Instantly add the UV Union Insert Valve and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
UV Union Insert Valve
Brand: Check-All Valve Manufacturing CompanyThe Union Insert (UV) valve is the threaded pipe counterpart of the Flange Insert Valve.
Designed to be inserted into most standard and hammer type ground joint unions, it provides the simplest and most economical way to install a check valve in a threaded pipe system. A check valve may be installed anywhere in the system where there is a union.
The valve works equally well in either a horizontal or vertical position with proper spring selection. Each Union Insert valve is furnished with a metal tag, which is quickly attached to the union when the valve is installed.
This provides a permanent visual notification that the union contains a check valve. The UV valve can also be used as a low pressure relief valve or vacuum breaker by using the desired spring settings.
Specifications
Approvals & Certifications
- ISO 9001
Diameter
- Orifice: 0.348” to 1.385” (8.63 to 35.05 mm)
Enclosure, Body Material
- 316 Stainless Steel
- Alloy 20 or Incoloy
- Alloy 400 or Monel
- Alloy B
- Alloy C-276 or Hastelloy
- Brass
- Carbon Steel
- Titanium
Flow Rate
- 2.3 to 33.3 Cv
Mounting
- Horizontal or Vertical
Name Plate, Tag Material
- Metal
Pipe Size
- 1/2” to 2” (12.7 to 50.8 mm)
Pressure Range
- Non-Shock Pressure-Temperature Rating - psig: 3,000 (kPa: 20,680, bar: 206.8) at 37.7° C (100° F)
Seat / Seal Material
- Seat: AFLAS
- Seat: Buna-N
- Seat: EPDM
- Seat: Kalrez
- Seat: Metal to Metal
- Seat: Neoprene
- Seat: PTFE
- Seat: Viton
Spring Material
- 316 Stainless Steel
- AISI 631 Stainless Steel, 17-7 PH
- Alloy 400 or Monel
- Alloy B
- Alloy C-276 or Hastelloy
- Alloy X-750 (Inconel)
- Fluorinated Ethylene Propylene (FEP)
- Titanium
Tolerance
- Spring Tolerance: ± 15 %