Yodify Product Library
Instantly add the Model iT100M/iT200M Series 4-20 mA Vibration Transmitter Module - Metric and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
Model iT100M/iT200M Series 4-20 mA Vibration Transmitter Module - Metric
Brand: Wilcoxon Sensing TechnologiesThe intelligent transmitter (iT) series from Wilcoxon is a complete family of 4-20 mA units providing signal conditioning for simplified online vibration monitoring. The iT series lowers the total cost of condition monitoring and predictive maintenance programs deployed by industrial, commercial and municipal facilities.
Each transmitter is custom-designed for individual applications. High- and low-pass filters can also be selected by the user. iT transmitters support accelerometers and piezovelocity transducers and can be configured to output 4-20 mA signal proportional to acceleration, velocity or displacement. The 4-20 mA output can be sent directly to the facility’s existing PLC or DCS for cost-effective continuous vibration monitoring.
iT vibration transmitter modules operate from a 24 Volt DC (nominal) power supply, accepting input directly from IEPE sensors and processing the signal to produce a 4-20 mA loop current proportional to the overall in-band vibration. The input dynamic vibration signal is buffered and presented as an output at the BNC connector and on one set of terminals.
Features- Front panel BNC for dynamic signal output
- Communicates with other iT series modules through integrated communication bus
- Dynamic signal available for portable data collectors or online systems
- Slim 17.5 mm case
- ESD protected
- Reverse wiring protection
- Manufactured in an approved ISO 9001 facility
Specifications
Accuracy
- Zero (4 mA) Accuracy: ± 0.25 mA
Approvals & Certifications
- ISO 9001
Approvals & Certifications
- CE
Circuit Protection
- ESD Protection
- Reverse Wiring Protection
Electrical Connectors
- BNC Connector
Frequency
- Frequency Response (Amplitude ± 3 dB): ≤ 0.3 Hz to 20 kHz
- Frequency Response (Phase Shift at 1 kHz): 0° ± 1°
- Frequency Response, without Filtering, -3 dB (Acceleration): 0.3 Hz to 20 kHz
- Frequency Response, without Filtering, -3 dB (Velocity): 2 Hz to 5 kHz
- High-Pass Filtering, 2-Pole, Pre-Set: 0.3 to 1,000 Hz
- Low-Pass Filtering, 8-Pole, Pre-Set: 200 to 20,000 Hz
Humidity
- ≤ 95 % Relative Humidity, Non-Condensing
Load Resistance
- Maximum 600 Ω
Mounting
- Snap Fit 35 mm DIN Rail
Operating Temperature
- -40° to 85° C (-40° to 185° F)
Output
- Output, Buffered Dynamic (Noise RTO, Broadband, 1 Hz to 10 kHz, RMS): ≤ 0.0001 V
Power
- Absolute, Max. 32 Vdc
- Current Draw, Max. 130 mA
- Sensor Powering (Constant Current): 3.6 mA ± 20 %
- Sensor Powering (Open Circuit Voltage): Vin - 2 ± 1 V
- Voltage (Vin): 24 ± 4 Vdc
Range
- Altitude Limit, Operating: 9,842.52 feet (3,000 metres)
Repeatability
- 2%
Sensitivity
- Sensor Sensitivities Accepted (Accelerometer): 1.02 to 51 mV/m/sec²
- Sensor Sensitivities Accepted (Piezo Velocity): 0.39 to 19.7 mV/mm/sec
Sensor, Probe Type
- Sensor Typical: IEPE Accelerometer & Piezo Velocity Transducers
Temperature Effect
- Temperature Offset, Max. 0.1 %/°C
Turn-On Time
- 120 seconds