Yodify Product Library
Instantly add the Monokote® MK-6 HY and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
Monokote® MK-6 HY
Brand: GCP Applied Technologies IncMonokote® MK-6 HY and MK-6s are single component, spray applied, mill-mixed fire resistive plasters.
MK-6 HY and MK-6s have approval for use on structural steel members and fluted decking to provide up to four hours of fire protection, and on flat plate cellular decking for up to three hours with Spatterkote® SK-3.
Features- Proven in-place performance
- Low in-place cost
- Fast, efficient application
- UL fire tested and factory inspected
- Building Code compliant
- Spatterkote® SK-3 shall be applied to all cellular steel floor units with flat plate on the bottom and to roof decking where required prior to application of Monokote®. Spatterkote® shall be applied in accordance with manufacturer’s application instructions.
- Monokote® Fireproofing material shall not be used if it contains partially set, frozen or caked material.
- The minimum average density shall be that required by the manufacturer, listed in the UL Fire Resistance Directory for each rating indicated, as required by the authority having jurisdiction, or minimum average 15 lbs/ft3 (240 kg/m3), whichever is greater.
- Monokote® shall be mixed with water at the job site.
- Monokote® Accelerator is to be used with Monokote® Fireproofing* to enhance set characteristics and product yield. The Monokote® Accelerator is injected into the Monokote® Fireproofing at the spray gun. Monokote® Accelerator shall be mixed and used according to manufacturers recommendations.
- Monokote® is applied directly to the steel, at various rates of application which will be job dependent, using standard plastering type equipment or continuous mixer/pump units. A spray gun, with a properly sized orifice and spray shield and air pressure at the nozzle of approximately 20 psi (38 KPa), will provide the correct hangability, density and appearance.