Yodify Product Library
Instantly add the IV CM Series Universal Water Cut Meter and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
IV CM Series Universal Water Cut Meter
Brand: DrexelbrookFor more than 50 years, Drexelbrook has been the world leader in capacitive based water cut measurement. We offer the highest pressure and temperature ratings in the industry and our capacitive probes can handle pressures up to 1,500 Psi and temperatures up to 450° F.
Our popular Universal IV CM Series is a high quality water cut meter, also known as a water cut monitor or BS&W, with a range of 0-50% in light oil and 0-80% in heavy oil.
It is built upon the Drexelbrook expertise in RF Admittance that allows the electronics to ignore paraffin and other coatings that buildup on the probe.
The Universal IV CM features a unique Cote Shield that is designed into the Universal IV CM series and enables the instrument to ignore a pre-determined length of the sensing element.
This water cut meter comes with a Perm-A-Seal sensing element that does not require epoxy coatings that wear out and require expensive servicing.
Using this water cut meter together with our HRTWin or new STExplorer PC software field configuration is possible from anywhere along the two wire loop.
The Universal IV CM sensing element is selected based on pipe size, wetted parts, NACE requirement and pressure/temperature. Drexelbrook offers a wide range of probes to fit virtually any application required.
All water cut meters features a built-in LCD display and keypad and comes from the factory pre-calibrated and requires only one point validation.
The Universal IV CM water cut meter is intrinsically safe and approved for Class I, Div1, and Zone 0 hazardous locations.
Features- Easy calibration
- Temperature range: Up to 232° C (450° F)
- Process pressure: Up to 103 bar (1,500 psi), probe dependent
- Power supply: 13-30 VDC
- 3 year warranty
Specifications
Brand
Certifications & Approvals
- ATEX
- IECEx
- FM
- FMc
- CE
- EAC
Supply Voltage
- 13-30 Vdc, 2-Wire Loop Powered
Ouput/Digital Protocol
- 4-20 mA, HART
- Compatible with HART
Accuracy
- ± 0.03 to ± 0.35
Resolution
- 0.0002 to 0.008
Ambient Temperature
- -40° to 85° C (-40° to 167° F)
Process Temperature
- Maximum 232° (450° F)
Process Pressure
- Up 103 bar (1,500 psi)
Process Connection
- NPT, ANSI
Response Time
- 350 milliseconds Nominal (No Damping Applied)
- 1-90 seconds Programmable Damping Time
Temperature Effect
- 0.5 % per 100° F (37.7° C) Change
Supply Voltage Effect
- 0.2 % of Full Scale Max.
Enclosure Rating
- NEMA 4X
- Automatic Well Testing (AWT)
- Lease Automatic Custody Transfer (LACT)
- Basic Sediment and Water (BS & W)
- Separation Vessels
- Pipeline Slug Detection
- Truck Unloading
- Pump Protection
- Dielectric Analysis
- Machinery Lube Oil Monitoring
Documentation
Data Sheets
- Bid Universal IV-CM Water Cut Meter spec. doc 28 KB
- Universal IV CM Water Cut Meter Data Sheet pdf 948 KB
- Universal IV CM Water Cut Meter with Density Compensation Data Sheet pdf 1.2 MB
- Universal IV CM Water Cut Meter with Spool Piece Sensing Data Sheet pdf 656 KB
- Universal IV CM Water Cut Meter with Temperature Compensation Data Sheet pdf 529 KB
Product Manuals
- Universal IV CM Water Cut Meter Manual pdf 8.4 MB
- Universal IV CM Water Cut Meter Quick Start Guide pdf 1.8 MB
- Universal IV CM Water Cut Meter STExplorer PC Software Utility Manual pdf 2.2 MB
- Universal IV CM Water Cut Meter with Density Compensation Manual pdf 10.0 MB
- Universal IV CM Water Cut Meter with Temperature Compensation Manual pdf 9.2 MB
Certifications
- IntelliPoint, Safety IntelliPoint, ThePoint, FloatRoof Approval Certificate GOST pdf 5.6 MB
- Universal IV Approval Certificate ATEX pdf 2.5 MB
- Universal IV Approval Certificate CE Mark pdf 178 KB
- Universal IV Approval Certificate FM pdf 304 KB
- Universal IV Approval Certificate FMc pdf 486 KB
- Universal IV Approval Certificate IECEx pdf 2.1 MB