Yodify Product Library
Add the LSC52 Miniature Capacitance Level Switch to your store or catalog
Book Your Demo and See How
or create your store
LSC52 Miniature Capacitance Level Switch
Brand: Intempco Controls, IncThe LSC52 is truly a high quality sensor, which can be used in harsh environments, for liquid level limit detection in metallic and non-metallic tanks containing electrically conductive or non-conductive liquids.
The probe, fitting and housing are constructed of stainless 316, the isolator is Teflon.
The LSC52 sensors feature built-in protection against reverse polarity, overvoltage and electrical shielding to deliver long-term reliability.
The output is relay SPDT which can be configured as either NO or NC or both NO and NC.
Features- All stainless steel 316 construction, Teflon® isolator
- Probe bare stainless steel or PFA Teflon clad
- Integral electronic switching, relay output
- Set-point calibration via one wire
- Built-in slosh dampening
- Hermetically sealed, vibration resistant construction
- Operates on RF capacitance principle
- For conductive and non-conductive liquids
- Minimum or maximum limit detection
Specifications
Brand
Ambient Temperature Range
- -40° to 85° C (-40° to 185° F)
Cable Length
- Extension: 6.5 to 16.4 feet (2 to 5 m)
- Extension: Max.
Calibration
- Set Point Via One Wire
Capacitance
- 5 to 1,000 PF
Circuit Protection
- Reverse Voltage
Consumption
- Power: 120 mW, Max.
- Power: 50 mA at 24 Vdc
Damping Adjustment
- 1 second
Electrical Connectors
- Electrical Termination: Lead Wires 22 AWG
- M12 Micro-Connector (5 & 8-Pin Male)
Electrical Contacts
- Normally Closed
- Normally Open
Environmental Protection
- IP66
- IP67
- NEMA 4X
Load
- Load Capability: 0.3 A at 110 Vac, Max.
- Load Capability: 1 A at 30 Vdc, Max.
Materials of Construction
- Extension: PVC Insulation, 90° C (195° F) - Max.
- Extension: Teflon, 200° C (392° F) - Max.
- Fitting: 316 Stainless Steel
NPT Connection
- 1/2" NPT Male
- 1/4" NPT Male
- 1/8" NPT Male
- 3/8" NPT Male
Output
- Probe: 1 mA, max.
- Probe: 1 Vac, Max.
Pressure Range
- psi: 0 to 100 (kPa: 0 to 690, bar: 0 to 6.9)
Process Temperature
- 100° C (212° F) - Max.
Sensitivity
- 0.5 PF
Sensor, Probe Length
- Probe: 1 to 36" (25.4 to 914.4 mm)
Sensor, Probe Material
- Probe: Bare 316 Stainless Steel
- Probe: PFA Teflon Jacketed
Supply Voltage
- 12-30 Vdc
Switch Type
- SPDT
Wetted Materials
- 316 Stainless Steel
- PFA Teflon
- Limit Detection for all Type of Liquids
- Use Teflon® Clad Probe for Conductive Liquids
- Use Bare SS Probe for Clean Non-Clogging Oils and Fuels
- For Side Mount and Bottom Mount Tank Applications
- Leak Detection
- Coolant Level Monitoring