Yodify Product Library
Add the DV/ZW-F Pressure & Vacuum Relief Valve, In-Line to your store or catalog
Book Your Demo and See How
or create your store
DV/ZW-F Pressure & Vacuum Relief Valve, In-Line
Brand: PROTEGOThe Protego in-line valve DV/ZW-F is a state-of-the-art pressure and vacuum relief valve with flanged connections for use in a vent line.
Typically the valve is installed in the in-and out-breathing lines of tanks, vessels and process apparatus to protect against unallowable high and low pressure.
The valve prevents emission losses almost up to the set pressure and prevents air intake almost up to set vacuum.
The valve is designed so that in cases in which the set pressure is exceeded the vapors are vented into a discharge pipe (e.g. vent header).
When the set vacuum is exceeded atmospheric air breathes into the system.
Due to its design the vacuum valve pallet is one size smaller than the pressure valve pallet.
The spring loaded design of the pressure pallet allows higher set pressures than the DV/ZW model does.
Features- "Full lift type" technology vent utilizes only 10% overpressure to reach full lift
- High performance seal reducing product loss below EPA's 500 ppm rule preventing environmental pollution
- Based on 10% technology the set pressure is close to the opening pressure which results in best possible pressure management of the system compared to conventional 40% or 100% technology valves
- Optimized flow performance, which reduces capital cost to a minimum as smaller sized valves may be used
- Flange connection discharge line
- Can be installed in explosion hazardous areas
- Housing designed to psi: 150 (kpa: 1,034, bar: 10.34) (PN 10)
- Spring loaded design on pressure side to achieve higher set pressures
- Maintenance friendly design
Specifications
Brand
Approvals & Certifications
- ISO 6358, ISO 16016
- TÜV (Technischer Uberwachungsverein)
Diaphragm Material
- FEP
Enclosure Finish
- ECTFE
Enclosure, Body Material
- Stainless Steel
- Steel
Flange Size - 1-1/2” (DN 40)
- 1-1/2" (DN 40) - 150# ASME B16.5
Flange Size - 2” (DN 50)
- 2" (DN 50) - 150# ASME B16.5
Flange Size - 3” (DN 80)
- 3" (DN 80) - 150# ASME B16.5
Flange Size - 4” (DN 100)
- 4" (DN 100) - 150# ASME B16.5
Flange Size - 6” (DN 150)
- 6" (DN 150) - 150# ASME B16.5
Flange Type
- Raised Face (RF)
- Smooth Finish
Gasket Material
- PTFE
Materials of Construction
- Heating Jacket, Valve Pallet: Stainless Steel
- Heating Jacket: Steel
- Valve Pallet: Aluminum
Pressure Range
- psi: -0.725 to -0.050 (kPa: -5 to -0.35, Mbar: -50 to -3.5) - Vacuum
- psi: 0.870 to 7.252 (kPa: 6 to 50, Mbar: 60 to 500)
Seat / Seal Material
- Seal: FEP
- Seal: Metal
- Valve Seat: Stainless Steel
Spring Material
- Pressure Spring: Stainless Steel