Yodify Product Library
Instantly add the BLENDTECH MARK I Injection Manifold and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
BLENDTECH MARK I Injection Manifold
Brand: BlendtechThe Blendtech Mark I Injection Manifold is a compact, high accuracy injection solution that measures and controls the injection rate.
The Mark I is comprised of a 303 stainless steel machined block containing process valves, a solenoid valve, process fittings, strainer, and a flow meter.
The unit acts as a “slave” device that provides a high-tech drop-in injection solution when combined with intelligent additive injection control hardware.
The Mark I is fully compatible with all Blendtech FLEx iO hardware, PLC, TAS and Preset Controllers, making it a versatile and reliable solution for a wide range of chemical additives and dyes.
The MiniBlock comes in two variants – 7718 and 7738. The MKI-7718 is designed for low dosage applications, typically for Dyes, Markers & Ethyl Mercaptan (Odorant), with a flow rate of 0.03 to 0.30 GPM (0.12 to 1.20 LPM).
The MKI-7738 is designed for typical additive applications with a flow rate of 0.3 to 3.0 GPM (1.2 to 12.0 LPM).
Features- Option of high strength aluminum manifold and meter body (special order)
- Mechanical gear systems ensure high degree of accuracy during control
- Leak points are eliminated with Teflon or Chemraz seals
- Supports multiple additive configuration
- Low pressure drop
- Industry standard components
- Suitable for Hazardous area
- AC or DC options Available
- Quick connect calibration port
- UL/ULc or ATEX Approvals available
1 - 2 of 2 Part Numbers
MKI-7718
MKI-7738
1 - 2 of 2 Part Numbers
Specifications
Brand
Dimensions
- 6.5” X 4.00” X 1.50” (L X H X D) 165.1 mm X 101.6 mm X 38.1 mm
Performance
- 0.25% to 0.50% accuracy 10:1 turndown Minimum injection size of 2cc
Operating Formation
- Maximum Pressure: 300 psig
Mechanical
- 3/8” FNPT inlet and outlet port connections
- Swagelok quick-connect fitting with dust cap on calibration port (316 L)
- Integrated basket screen strainer 230 micron (60 mesh)
- Check valve on output port (1psig cracking pressure)
Options
- Calibration Kit (recommended)
- Thermal Relief Kit (for dye applications)
Electrical
- Inject Valve: Explosion Proof, 2-way direct acting normally closed solenoid valve. Rated for use in Class 1, Zone 1 Group C and D hazardous areas. CSA or ATEX approvals are available. 120VAC 60Hz, 240VAC 50Hz, 12 VDC and 24 VDC options available.
- Flow Meter Sensor: 3 wire Hall-Effect type (5 to 30 VDC)