Yodify Product Library
Instantly add the 8010 In-Line Paddle Wheel Flow Switch and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
8010 In-Line Paddle Wheel Flow Switch
Brand: Burkert Fluid Control Systems
The Inline flow sensor/switch Type 8010 is specially designed for use in pure and water resembling fluids, free from air bubbles and magnetizable particles, to monitor minimum/maximum values of flow.
The sensor/switch is made up of a sensor fitting (Type S010) and an electronic module (Type SE10), quickly and easily connected together by a Quarter-Turn.
The 8010, which is uni-directional, should be mounted in respect of the arrow that indicates the flow direction.
The device indicates the presence of a flow in the pipe by switching the Reed contact contained in the electronic module. The switching points minimum/maximum for rising and falling velocities can be set with a screw within a defined range.
Features- Economic integration in pipe systems without any additional piping
- Magnetic measuring principle
- Mechanical adjustment of setpoint
Specifications
Ambient Temperature Range
- Operating & Storage: 0° to 55° C (32° to 131° F)
Approvals & Certifications
- CE
- EU Directives
- PED 2014/68/EU
BSP Connection
- G 1” Female
- G 1” Male
- G 1/2” Female
- G 1-1/2” Female
- G 1-1/2” Male
- G 1-1/4” Female
- G 1-1/4” Male
- G 2” Female
- G 3/4” Female
- G 3/4” Male
- 1” BSPT Female
- 1/2” BSPT Female
- 1-1/2” BSPT Female
- 1-1/4” BSPT Female
- 2” BSPT Female
- 3/4” BSPT Female
Cable Length
- 328.1 feet (100 metres) - Max.
Cover Material
- 20 % Glass Fibre Reinforced
Diameter
- Pipe: 1/2 to 2” (DN 15 to DN 50)
Electrical Connectors
- 0.14 to 0.5 mm² Cross Section
- Cable Plug: EN 175301-803
Electrical Contacts
- Normally Closed
- Normally Open
- Reed Contact
Electrical Rating
- 0.8 A at 150 Vdc / 250 Vac, Max.
- 2.5 A at 50 W, Max.
Enclosure, Body Material
- Polycarbonate (PC)
Environmental Protection
- IP65
Flange Size - 1-1/2” (DN 40)
- 1-1/2” (DN 40) - JIS 10K (ANSI B16-5)
- 1-1/2” (DN 40) - PN 16 (EN 1092-1/B1)
Flange Size - 1-1/4” (DN 32)
- 1-1/” (DN 32) - JIS 10K (ANSI B16-5)
- 1-1/4” (DN 32) - PN 16 (EN 1092-1/B1)
Flange Size - 1” (DN 25)
- 1” (DN 25) - JIS 10K (ANSI B16-5)
- 1” (DN 25) - PN 16 (EN 1092-1/B1)
Flange Size - 1/2” (DN 15)
- 1/2” (DN 15) - JIS 10K (ANSI B16-5)
- 1/2” (DN 15) - PN 16 (EN 1092-1/B1)
Flange Size - 2” (DN 50)
- 2” (DN 50) - JIS 10K (ANSI B16-5)
- 2” (DN 50) - PN 16 (EN 1092-1/B1)
Flange Size - 3/4” (DN 20)
- 3/4” (DN 20) - JIS 10K (ANSI B16-5)
- 3/4” (DN 20) - PN 16 (EN 1092-1/B1)
Flow Rate
- 10 m/sec, Max.
Humidity
- ≤ 80 % Relative Humidity, Non-Condensing
NPT Connection
- 1” NPT Female
- 1/2” NPT Female
- 1-1/2” NPT Female
- 1-1/4” NPT Female
- 2” NPT Female
- 3/4” NPT Female
O-Ring Material
- EPDM
- FKM
Pipe Connection
- DN 15 Pipe
- DN 20 Pipe
- DN 25 Pipe
- DN 32 Pipe
- DN 40 Pipe
- DN 50 Pipe
Plug Material
- Cable Plug: Polyamide (PA)
Pressure Range
- With Metal Sensor Fitting - psi: 0 to 232.1 (kPa: 0 to 1,600, bar: 0 to 16) - Max.
- With Plastic Sensor Fitting - psi: 0 to 145 (kPa: 0 to 1,000, bar: 0 to 10) - Max.
Process Connection Material
- Metal
- Plastic
Process Temperature
- With Sensor Fitting in PP, PVDF, Brass, Stainless Steel: 0° to 55° C (32° to 131° F)
- With Sensor Fitting in PVC: 0° to 50° C (32° to 122° F)
Screw Material
- Setting Screw: -Plated Brass
Seat / Seal Material
- Seal: EPDM
- Seal: FKM
Switch Point Range
- 4.7 to 75.4 L/minute
Tri-Clamp Connection
- DN 15 Tri-Clamp
- DN 20 Tri-Clamp
- DN 25 Tri-Clamp
- DN 32 Tri-Clamp
- DN 40 Tri-Clamp
- DN 50 Tri-Clamp
Viscosity
- 100 cSt, Max.
Welded Connection
- DN 15 Weld End
- DN 20 Weld End
- DN 25 Weld End
- DN 32 Weld End
- DN 40 Weld End
- DN 50 Weld End
Wetted Materials
- Fitting, Sensor Holder & Axis: 316L Stainless Steel, 1.4404
- Fitting, Sensor Holder & Blade: PVDF
- Fitting, Sensor Holder: Brass (CuZn₃₉Pb₂)
- Fitting, Sensor Holder: Polypropylene (PP)
- Fitting, Sensor Holder: PVC