Yodify Product Library
Instantly add the PGD-100 Gas Conditioner Unit and 50,000+ more product series to your store or catalog  
Book Your Demo and See How
or create your store

PGD-100 Gas Conditioner Unit

Brand: madur

PGD-100 is a powerful gas conditioner necessary to prepare gas sample before further analysis. 

It removes most particles from the gas and keeps stable level of its humidity during whole measurements. 

Using gas conditioner is essential in case of majority measurements with gas analyzers.
Features
  • Gas conditioner unit includes:
  • Gas probe pipe of wide range of available lengths and types
  • Initial heated filter
  • Heated hose with integrated heated filter
  • LCD for checking the status of the gas dryer
  • Final filters that cleans the dried gas sample
  • Built-in gas pump for independent extraction of the gas sample
  • Peristaltic pump which removes condensed water (only if at least one Peltier element is installed)
  • Integrated solenoid valve for ventilation (works only with Photon gas analyzer)
  • Powerful gas drying modules - Peltier element or / and Nafion exchanger based (one or two drying modules)
  • Remote control over RS-232 from measurement unit (works only with Photon gas analyzer)

Specifications

Brand

Capacity

  • Peristaltic Pump: 38 mL/min

Consumption

  • Heated Hose Power Supply, Max.
  • Power Supply, Max.

Cover Material

  • Gas Filter: Polycarbonate (PC)

Diameter

  • Filter Insert Inner Diameter: 0.47” (12 mm)
  • Filter Insert Inner Diameter: 0.59” (15 mm)
  • Filter Insert Outer Diameter: 0.7” (18 mm)
  • Filter Insert Outer Diameter: 0.78” (20 mm)

Enclosure, Body Material

  • Gas Filter: Polyamide (PA)
  • Plywood Covered with Aluminum

Flow Rate

  • Gas Flow for Efficient Drying (At Inlet Gas Temperature 100° C & 100 % Relative Humidity): 100 L/hr, Max.

Humidity

  • 5 to 90 % Relative Humidity, Non-Condensing

Hysteresis

  • Heated Hose Temperature: 5° C Approximately

Input

  • Power Supply, Heated Hose Power Supply: 230 Vac

Length

  • Filter Insert: 1.26” (32 mm)
  • Heated Hose: 16.4 feet (5 metres)
  • Heated Hose: 32.8 feet (10 metres)
  • Heated Hose: 9.84 feet (3 metres)

Materials of Construction

  • Filter Insert: Polyethylene (PE)

Operating Temperature

  • 10° to 50° C (50° to 122° F)

Operating Time

  • Ready to Operate After: 1 Minute - PGD-100 Gas Dryer with Single Nafion Dryer
  • Ready to Operate After: 10 to 15 minutes - PGD-100 Gas Dryer with Nafion Dryer + Condensation Dryer, PGD-100 Gas Dryer with Dual Condensation Dryer
  • Ready to Operate After: 5 minutes - PGD-100 Gas Dryer with Single Condensation Dryer

Seat / Seal Material

  • Gas Filter (Sealing): Viton

Sensor, Probe Type

  • Heated Hose Thermocouple Wire: K-TypicaL Thermocouple
  • Heated Hose Thermocouple Wire: S-TypicaL Thermocouple

Storage Temperature

  • 0° to 60° C (32° to 140° F)

Supply Voltage

  • Dryer Typical: 12 Vdc (Based on Peltier Cooling Element with Fan) - PGD-100 Gas Dryer with Single Condensation Dryer, PGD-100 Gas Dryer with Nafion Dryer + Condensation Dryer (Outlet 2)

Temperature Range

  • Cooling: 0° to 20° C (32° to 70° F) - PGD-100 Gas Dryer with Single Condensation Dryer, PGD-100 Gas Dryer with Nafion Dryer + Condensation Dryer (Outlet 2), PGD-100 Gas Dryer with Dual Condensation Dryer (Second Dryer)

Instantly populate your store or catalog 
CREATE YOUR SITE
or book a demo with the Yodify Team
show more