Yodify Product Library
Instantly add the SX Flow Switch and 50,000+ more product series to your store or catalog  
Book Your Demo and See How
or create your store

The SX series sanitary flow switch has been designed to meet the most critical flow detection applications in the food, pharmaceutical, biotechnology, and water treatment industries.

Quick disconnect tri-clamp caps are standard with special finishes for 3A applications and polished/electropolished for biotechnology and pharmaceutical use. 

The thermal dispersion principle of operation features no moving parts exposed to the process and 316L Stainless Steel is standard for all wetted surfaces. The instrument operates by measuring a temperature differential between a heated and a reference temperature sensor.

An extremely low power heating element is attached to a temperature sensor while a second temperature sensor is isolated from the heater to provide compensation for changing process temperature. 

The electronics measure the differential and can be adjusted to switch at any flow listed in the flow switch set-point range chart.

Extremely low flow rates such as 0.04 GPM in a 1” line can be detected with rangeability up to 300:1. These flow switches can be used in virtually all liquids, slurries, and gasses.

The electronics are available in several different configurations including single or dual switch points. 

Temperature monitoring is available with either a switch output or a linear 4-20 mA output. Relay outputs are standard and are offered with several different configurations and either 3 or 10 amp contact ratings.

Remote mounting of the electronics is also available.
Features
  • Tri-Clamp Style Process Connection
  • 3A Sanitary Design
  • 316L Stainless Steel with Electropolish Option
  • Temperatures to 350° F
  • Low Velocity Detection
  • No Moving Parts for Reliable Results
  • Pressures to 2,000 psiG
  • Field Programmable Relay Energization

Specifications

Accuracy

  • ± 0.5 % of Range at Constant Conditions

Approvals & Certifications

  • ATEX
  • CSA
  • FM
  • UL

Communication

  • Model MC-5 Calibrator

Conduit Connection

  • 1” NPT Female

Cover - for Local Enclosure

  • Blind Cover

Electrical Connectors

  • 1” NPT Female

Electronics - Standard Features

  • Easy / Fast Calibration
  • Excellent Low Flow Sensitivity
  • Two Independent Relays

Enclosure, Body Material

  • 316L Stainless Steel

Environmental Protection

  • IP66
  • NEMA 4X / IP66

Flange Material

  • 316L Stainless Steel
  • Electro-Polished to 15Ra

Input Power

  • 117 Vac (90-135 Vac)
  • 200-240 Vac
  • 24 Vdc or Vac (± 10 %)

Insertion 'U' Length

  • 1” (2.54 cm)
  • 1.8” (4.6 cm)
  • Custom Lengths in inches

Mounting

  • Remote Mounting

Operating Pressure - Sensor

  • Vacuum to psig: 2,000 (bar: 138, MPa: 13.8)

Operating Temperature - Electronics

  • -46° to 65° C (-50° to 150° F)

Operating Temperature - Sensor

  • -46° to 177° C (-50° to 350° F)

Options

  • Calibrator
  • Circuit Boards

Principle of Operation

  • Thermal, Calorimetric

Remote Electronics Enclosure & Cover

  • Blind Cover

Response Time

  • From 3 seconds

Sensor, Probe Style

  • Insertion

Switch Point Range

  • Gases: 0.5 to 120 FPS, 0.15 to 36.57 MPS
  • Hydrocarbon-based Liquids: 0.02 to 3.0 FPS, 0.006 to 0.91 MPS
  • Water-based Liquids: 0.02 to 0.7 FPS, 0.006 to 0.21 MPS

Switch Type

  • DPDT 3 A or 10 A Resistive

Tri-Clamp Connection

  • 1-1/2” Sanitary Clamp
  • 2” Sanitary Clamp
  • 3” Sanitary Clamp
  • 4” Sanitary Clamp

Wetted Materials

  • 316L Stainless Steel

  • Suitable for CIP systems
  • UV Systems: Verifies flow for save operation of UV systems
  • Pump Protection: Automatic shut down on low flow or no flow
  • Control Rooms: Verifies flow of pumps or if valves are energized
  • Reliably used in extremely viscous fluids
  • Deionized/ Ultrapure Water Flow Sensor
  • Agitation Monitor: Positive indication of agitation in tanks or vessels
Instantly populate your store or catalog 
CREATE YOUR SITE
or book a demo with the Yodify Team
show more