Yodify Product Library
Add the LTX10 Sanitary Capacitance Level Transmitter to your store or catalog
Book Your Demo and See How
or create your store
LTX10 Sanitary Capacitance Level Transmitter
Brand: Intempco Controls, IncThe INTEMPCO LTX10 Sanitary series are highly reliable and microprocessor based RF level sensors designed to measure tank levels of conductive and non-conductive liquids in metal tanks.
LTX10 sensors measure the change in capacitance that occurs as the tank level changes and outputs a standard loop-powered 4-20 mA signal.
After calibration any change in level is recognized and converted to an Analog 4-20 mA signal.
LTX10 sensors use very high frequency and very low amplitude sensing circuitry to greatly minimize the effects of coating on the sensing probe.
The LTX10 includes a standard 4-20 mA loop-powered LTX transmitter housed in a rugged enclosure, a 1/2" (12.7 mm) diameter rigid probe for ranges up to 20 feet (6.09 meters) and a polished stainless Tri-Clamp.
Probe material is SS316, supplied bare or PFA jacketed. The LTX10 is designed for tanks which have available Tri-Clamp connection.
Features- High quality sanitary design
- Continuous loop-powered 4-20 mA operation
- Microprocessor based
- Accuracy 1% of span for constant dielectric of material
- Non-interactive zero and span calibration
- Calibration accomplished with 4 push buttons
- Stainless and PVC housings available
- Tri-Clamp sanitary fitting standard, others available
- PFA Teflon coated or bare SS316 probes available
1 - 1 of 1 Part Numbers
LTX10
- Electronic Module - 4-20 mA, 2-Wire Output Module Installed in Enclosure
- Enclosure - Machined 316 Stainless Steel Screw Cover - NEMA 4X - 1/2" NPT
- Fitting - 1-1/2" Tri-Clamp
- Probe Materials - Teflon Jacketed Solid Probe
- Probe Length - 6 Custom Probe Length in Inches
1 - 1 of 1 Part Numbers
Specifications
Brand
Accuracy
- ± 1 % of Full Span (Constant Dielectric)
Ambient Temperature Range
- -40° to 70° C (-40° to 158° F)
Cable Length
- 0 to 1,000 ft (0 to 300 metres)
Calibration
- Via 4 Push-Button Switches
Capacitance
- 10 to 10,000 PF
Conduit Connection
- 1/2" NPT Female
- 3/4" NPT Female
- PG9 Gland
Damping Adjustment
- 0 to 30 seconds
Enclosure, Body Material
- Cast 316 Stainless Steel
- Machined 316 Stainless Steel
- PVC
Environmental Protection
- IP66
- NEMA 4X
Loop Resistance
- 700 ohms at 24 Vdc, Max.
Materials of Construction
- Mounting Fitting: 316 Stainless Steel
Output
- 4-20 mA, 2-wire Loop-Powered
Pressure Range
- bar: 1 to 34
- kPa: 100 to 3,400
- psi: 14.5 to 500
Process Temperature
- 200° C (392° F)
Repeatability
- ± 0.1 % of Span
Sensor, Probe Diameter
- Probe: 1/2" (12.7 mm)
Sensor, Probe Length
- Probe: 6 to 240" (152.4 to 6,096 mm)
Sensor, Probe Material
- Probe: Bare 316 Stainless Steel
- Probe: PFA Teflon Jacketed
Supply Voltage
- 12-36 Vdc
Tri-Clamp Connection
- 1-1/2" Tri-Clamp
- 2" Tri-Clamp
- 2-1/2" Tri-Clamp
- 3" Tri-Clamp
- Pharmaceutical Plants, Food Processing Plants
- PFA Jacketed Probes Required for Conductive Media, Such as Water and Water-Based Liquids
- PFA Jacketed Probes for Organic Acids
- PFA Maximum Temperature 200°C
- Use Bare Probes With Non-Conductive Media Such as Oils and Fuels in Some Metallic Tanks
- On-Site Calibration Required
- Not Recommended Where Material Dielectric Changes
- Tanks Must be Conductive or Special Grounding May be Required