Yodify Product Library
Instantly add the Paladin® for Pipe and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
Paladin® for Pipe
Brand: Heat-LinePaladin employs the unique and advanced performance of self-regulating pipe heater wire technology.
The Paladin heat wrap for pipes is constructed of advanced self-regulating heating cable technology.
The Paladin can effectively increase heat and energy output to sections along its length which are cold and simultaneously reduce heat and energy output to sections that are warm.
You never have to worry about the Paladin heated pipe wrap system overheating causing the risk of melting and fire because of the self-regulating pipe heater wire technology.
Paladin gives you the peace of mind of reliable pipe freeze protection without the risk.
It has become an essential product for farmers and barn managers to provide safe and reliable freeze protection in barns and stables.
To further increase the energy efficiency of the Paladin heated pipe wrap system, it is recommended to add thermal insulation and a thermostat.
The additional thermal insulation works to reduce heat loss, and the thermostat allows you to duty cycle your Paladin system based on external pipe temperature.
Both accessories combined can increase energy efficiency by as much as 80%.
Features- Suitable for small and large pipe diameters
- 5 year limited warranty, 10 year extended warranty available
- Can be installed on all metallic and non-metallic pipes, tanks and vessels
- Provides reliable freeze protection of all pipe diameters (when properly measured and installed)
- Easily and quickly installed on most pipes without their removal
- Will never melt or burn through the water pipe, even if the pipe is dry
- Can be overlapped without the concern of overheating
- Can be fully insulated to increase energy efficiency
- Control devices including timers and thermostats are optional
Specifications
Brand
Approvals
- cCSAus approved (Canada and USA) LR85446
- Usage Type W Canada
- Installation Type D USA
- Internal waste (Grey and Black) water certified
Electrical Specifications
- Self-Regulating/Conductive Polymer Tubular Heater
- 120 Volt systems - 5 watt /ft. at 50° F (10° C), Max. length 230 ft. (70 m)
- 240 Volt systems - 5 watt /ft. at 50° F (10° C), Max. length 540 ft. (165 m)
- 120 Volt GFC models - 4 ft. (1.2 m) power supply lead with 27 milliamp ground fault circuit interrupter plug-in device
- 240 Volt GFC models - 6 ft. (1.8 m) power supply lead with 27 milliamp ground fault circuit interrupter plug-in device
- CS models - 6 ft. (1.8 m), 12- 14 AWG SJEOOW supply cord for direct hardwire connection, GFCI must be field installed
Plumbing Specifications
- Tubular heater constructed of 1/2 inch I.D. chemical resistant HDPE
- Minimum internal pipe size required is 3 inch I.D. or greater
- Supplied with Female Fernco flexible couples to adapt to 3 inch and 4 inch ABS pipe and spigots
- Supplied with Nibco 3 inch and 4 inch threaded male adapters SPIG x MIPT for connection to 3 inch and 4 inch ABS clean-outs
- Suitable for both metallic and non-metallic piping