Yodify Product Library
Instantly add the Q2-Flow 1-Piece Insert Guided Cage and 50,000+ more product series to your store or catalog  
Book Your Demo and See How
or create your store

Q2-Flow 1-Piece Insert Guided Cage

Brand: Q2 Artificial Lift Services

Q2 Artificial Lift Services’ Q2-Flow 1-Piece Insert Guided Cages utilizes Q2-Flow™ Inserts. The Q2-Flow™ inserts allows the gas to remain in solution as its unique shape forces the fluid into a vortex spin. 

The Vortex flow from below causes a reverse seat, sealing the ball in place from underneath. 

The inner section of the insert can be “carved out” to handle larger amounts of solids, without the ball causing major vibrational damage. 

Alternative inserts also give more clearance to allow for solids to flow through the inserts with less restriction. 

Our Q2-Flow insert guided cage was developed to provide the maximum service life in the severe conditions. 

Q2 Artificial Lift Services utilizes Tangentflow™ Inserts.
Features
  • Reduce pressure drop by up to 40%.
  • Reduce cage failure by distributing ball impact forces evenly across upper three ribs and inner wall of the cage.
  • Increase of pump efficiency in gas cut environment.
  • Handle solids more efficiently than the conventional inserts.
  • Scale and paraffin build up is minimized as lower pressure drop across valve occurs from vortex flow.
  • Increasing the ID of Insert will not impact wear due to reduced ball vibration compared to conventional inserts.
  • Alternate size balls can be used as the uniform vortex flow from below helps control ball chatter. Good for handling higher solids and for increasing the flow.
  • Balls wear uniformly due to the inside of the inserts spherical dimensions and have a longer lifespan.

Specifications

Well Depth

  • Well Depth is between 8,300 and 9,300 f

Well Size

  • Well Size is 2 1/4 ” for Standing Cage and 1 3/4” for Traveling Cage

API of Oil

  • API 29 to 41 Oil

Formation

  • Red River Dolomite

Permeability

  • 1-97

Ave Temp

  • 220 to 250 F

H₂S

  • Yes, 25 - 400,000 ppm

CO2

  • Yes, 3 to 33 %

AIR

  • Injecting Air Converts to N and CO₂

Corrosion

  • CL (9,000 to 72,000 mg/L)

Inhibitor

  • Yes, Cap rings to inject Wide range of Corrosion Inhibitors

Gear Box Size

  • 640, 912, 1120 all sizes

Injection

  • Air and Water.

Plunger Size

  • Short 3 to 4 foot grooved. Lots of fines.

Deviation

  • Yes, 60 Degrees into Horizontals

Gas Separator

  • Yes, downhole

Ball Type

  • Tungsten Carbide

Compression

  • Yes, lots of Compression on String Design

Fines

  • Yes, fines are an issue in most areas.

TF Insert

  • Now going in ALL wells both traveling & standing cages
Instantly populate your store or catalog 
CREATE YOUR SITE
or book a demo with the Yodify Team
show more