Yodify Product Library
Add the Enphase IQ7A 366W Microinverter to your store or catalog
Book Your Demo and See How
or create your store
Enphase IQ7A 366W Microinverter
Brand: Enphase EnergyThe high-powered smart grid-ready Enphase Micro Inverter dramatically simplifies the installation process while achieving the highest system efficiency for systems with 60-cell and 72-cell modules.Part of the Enphase IQ System, the IQ 7A Micro Inverter integrates with the Enphase IQ Envoy™, Enphase IQ Battery™, and the Enphase Enlighten™ monitoring and analysis software.The IQ Series Enphase Micro Inverter extends the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty of up to 25 years.
The Enphase Micro Inverter maximizes energy production by using a sophisticated Maximum Power Point Tracking (MPPT) algorithm. Each Enphase Micro Inverter individually connects to one PV module in your array. This configuration enables an individual MPPT to control each PV module, insuring that maximum power available from each PV module is exported to the utility grid regardless of the performance of the other PV modules in the array. While an individual PV module in the array may be affected by shading, soiling, orientation or PV module mismatch, each Enphase IQ7A-72-2-US IQ Micro Inverter™ insures top performance for its associated PV module.
Features- Peak output power 366 VA @ 240 VAC and 295 VA @ 208 VAC.
- Lightweight and simple
- Faster installation with improved, lighter two-wire cabling
- Built-in rapid shutdown compliant (NEC 2014 & 2017)
- Optimized for high powered 60-cell and 72-cell modules
- Highest CEC efficiency of 97%
- More than a million hours of testing• Class II double-insulated enclosure• UL listed
- Complies with advanced grid support, voltage and frequency ride-through requirements• Envoy and Internet connection required
- Configurable for varying grid profiles• Meets CA Rule 21 (UL 1741-SA)
Specifications
Brand
Commonly Used Module Pairings
- 295 W - 260 W
Module Compatibility
- 60 Cell
- 120 Half Cell and 72 Cell
- 144 Half Cell Modules
Maximum Input DC Voltage
- 58 V
PV Input Operating Voltage Range
- 18 V - 58 V
Min/Maximum Start Voltage
- 33 V / 58 V
Maximum DC Short Circuit Current (Module Isc)
- 15 A
Overvoltage Class DC Port
- II
DC Port Backfeed Current
- 0A
Peak Output Power
- 366 VA
Maximum Continuous Output Power
- 349 VA
Nominal (L-N) Voltage/Range
- 230 V / 219 V - 264 V
Maximum Continuous Output Current
- 1.52A
Nominal Frequency
- 50 Hz
Extended Frequency Range
- 45 Hz - 55 Hz
AC Short Circuit Fault Current Over 3 Cycles
- 5.8 Arms
Maximum Units Per 20A (L-N) Branch Circuit
- 11 (single-Phase)
Overvoltage Class AC Port
- III
AC Port Backfeed Current
- 18 mA
Power Factor Setting
- 1.0
Power Factor (Adjustable)
- 0.8 leading ... 0.8 lagging
EN 50530 (EU) Weighted Efficiency
- 96.5%
Ambient Temperature Range
- -40° C to +60° C
Relative Humidity Range
- 4 % to 100 % (Condensing)
Maximum Altitude
- 2000 m
DC Connector Type
- Bulkhead with MC4 Locking Type Connector
Dimensions (H x W x D)
- 212 mm x 175 mm x 30.2 mm (Without Bracket)
Weight
- 1.08 kg (2.38 lbs)
Cooling
- Natural Convection - No Fans
Approved for Wet Locations
- Yes
Pollution Degree
- PD3
Enclosure
- Class II Double-Insulated, Corrosion Resistant Polymeric Enclosure
Environmental Category / UV Exposure Rating
- Outdoor - IP67
Communication
- Power Line Communication (PLC)
Monitoring
- Enlighten Manager and MyEnlighten Monitoring Options
- Compatible with Enphase Envoy-S
Compliance
- AS/NZS 4777.2
- RCM
- IEC/EN 61000-6-3
- IEC/EN 62109-1
- IEC/EN 62109-2
- EN 50549
- G98/G99
- VDE-AR-N-4105