Yodify Product Library
Instantly add the ST-35C Multiple Point Optic Sensing Overfill Prevention Controller and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
ST-35C Multiple Point Optic Sensing Overfill Prevention Controller
Brand: Scully Signal CompanyThe Scully overfill prevention system interfaces with optic sensors. It is typically used for bottom and top-loading of tank vehicles. It is mounted at the loading rack/gantry and connects to the vehicle via the Scully plug and cable assembly. The attached plug and 9.14 meters (30’) cable connect to the vehicle mounted receptacle, or socket, which is wired to the truck sensor. Please consult Scully for alternate plug and socket styles to prevent mixing AV gas and jet fuels in dedicated refuelers.
The ST-35 system provides the vehicle with an adequate static ground path to the rack/gantry provided the vehicle’s overfill equipment is wired and maintained to factory specifications. For additional ground/earth verification options, consult Scully for information on the Groundhog Self-Proving Grounding System.
Features- Maximum safety with Dynacheck® automatic and continuous self-checking circuitry
- Will not permit loading under any fault or wet sensor condition
- Signals for automatic shut off of product flow within a half-second of detecting a potential overfill condition
- Easy connection to vehicles with rugged, versatile plug and cable units
- Complete compatibility with Scully IntelliCheck® and Load Anywhere® onboard systems and independent five-wire optic sensors
- ST-35 models monitor 1 – 8 compartment tank vehicles while the ST-35C models monitor 1 – 12 compartment tank vehicles
- Approved by FM, CSA and ATEX
1 - 11 of 11 Part Numbers
08159NV
08360
08621
08623
08647
08768NV
09420
09421
26055
26343
27065
1 - 11 of 11 Part Numbers
Specifications
Brand
Response Time
- 0.5 s Max.
Operating Temperature
- -40° to +60° C (-40° to +140° F)
Power Requirement
- 100-130 Vac, 50/60 Hz, 20 W Max.
- 200-250 Vac, 50/60 Hz, 20 W Max.
Connection
- Provided by Internal Terminal Strips
Output Relay
- One Normally Open Volt-free Contact, Rated 250 Vac 5 A Resistive
- Energized When the Sensors Are Dry
Output Control Fuse
- Internal 5 A
Certifications & Approvals
- Baseefa02ATEX0047 Ex db [ia Ga] mb 11B T5 Gb (Tamb -40° to +60° C)
- CE
- ATEX