Yodify Product Library
Instantly add the HTR200/201 Temperature Transmitter and 50,000+ more product series to your store or catalog  
Book Your Demo and See How
or create your store

HTR200/201 Temperature Transmitter

Brand: Status Instruments

The HTR200 is a cost effective “smart” transmitter integrated into an MAA type connection head that accepts resistance signals including RTD sensors and converts them to a standard industrial (4 to 20) mA transmission signal over a user programmed range. 

There are two versions available with either 1/8" BSP or M10 probe connections.

Its small size (52 mm swing diameter), allows for installations where space is critical and being 60% lighter than a conventional transmitter installed in a KNE type alloy head, means smaller stem diameter and head threads can be used in the temperature probe.

Temperature probes are sold separately and our style 1 and 2 are the most popular with this product.

A flexible approach has been taken with this design in that, the standard product will accept over 30 resistance sensors, including Pt100, Pt500 Pt1000, Ni100, Ni1000 and variable resistance.

The new design also allows for custom sensors to be accommodated. It is also possible to generate your own linearisation curve for resistance or slide wire inputs. 

PC configuration allows the user to select Sensor type, Range, Units and error signal without requiring calibration equipment.

Configuration is performed quickly using our USB port driven configurator by simply connecting two clips to the HTR200 loop terminals and following the software instructions.

Additionally, the user may read live process data when connected to the PC, allowing for sensor offset calibration, where the user can enter an offset value to correct for any sensor offset.

1 - 2 of 2 Part Numbers
HTR200
HTR200
  • Probe Entry - Probe Entry M10 x 1.0
HTR201
HTR201
  • Probe Entry - Probe Entry 1/8" BSP
1 - 2 of 2 Part Numbers

Specifications

Accuracy

  • (mA Output/2,000) or 5 µA whichever is greater - for Output
  • Resistance: ± 0.055 to ± 10 ohms
  • Sensor: ± 0.05 % of Reading + ± 0.2° C (± 0.36° F)
  • Slide Wire: 0.05 %

Approvals & Certifications

  • EMC BS EN 61326
  • IEC 61000-4-2 (Electrostatic Discharge), 61000-4-3 (EM Field), 61000-4-4 (Transient Burst (Output)), 61000-4-5 (Surge (Output))

BSP Connection

  • 1/8” BSP Female

Communication

  • USB

Current

  • Excitation Current: < 200 μA
  • Loop Current: 4-20 mA

Diameter

  • Swing Diameter: 52 mm

Electrical Connectors

  • 2 or 3-Wire Screw Terminal

Enclosure, Body Material

  • Aluminum

Humidity

  • 10 to 90 % Relative Humidity, Non-Condensing

Metric Connection

  • M10 x 1 Female

Operating Temperature

  • -40° to 85° C (-40° to 185° F)

Operating Temperature - Sensor

  • -200° to 850° C (-328° to 1,562° F)

Output

  • 2-Wire (4-20) mA Current Loop
  • 3.8-21.5 mA
  • 4-20 mA

Output Load

  • (Vsupply-10) / 20 kiloohms, Max.

Power Supply

  • 8-30 Vdc

Power Supply Effect

  • Loop Voltage Effect: 0.2 µA/V

Resistance

  • 10 to 10,450 ohms
  • Maximum

Response Time

  • 0.5 second

Sensor, Probe Connection

  • 2- or 3-Wire Screw Terminal

Sensor, Probe Diameter

  • 2.047” (52 mm) Swing

Sensor, Probe Type

  • Cu100
  • Cu1000
  • Cu53
  • Ni100
  • Ni1000
  • NI120
  • Ni507.5
  • Ni604
  • Pt100
  • Pt1000
  • Pt500
  • RTD

Span - Minimum

  • 25° C (77° F)

Storage Temperature

  • -50° to 90° C (-58° to 194° F)

System Requirements

  • Running Windows® XP or Later with USB Port

Temperature Effect

  • Lead Resistance Effect: 0.002° C/ohm

Thermal Drift

  • 0.0025 %/°C
  • 1 µA/°C

Turn-On Time

  • 4 seconds (I Out < 4 mA During Start Up)

Update Time

  • 200 milliseconds
  • Warm-Up: 1 Minute to Full Accuracy

Instantly populate your store or catalog 
CREATE YOUR SITE
or book a demo with the Yodify Team
show more