Yodify Product Library
Instantly add the Baseline 9000 Total Carbon Analyzer and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
Baseline 9000 Total Carbon Analyzer
Brand: MOCONThe Baseline® 9000 TCA Total Carbon Analyzer is a microprocessor-based instrument designed to measure total hydrocarbon content as well as provide a combined carbon monoxide (CO) and carbon dioxide (CO₂) reading for impurity detection at industrial and specialty gas companies.
Detection limits down to < 0.1 ppm. User-programmable ranges from 1 ppm to 100 ppm are factory-configured per the customer’s application to facilitate installation and setup.
This CO and CO₂ gas analyzer uses a flame ionization detector (FID) in conjunction with a methanizing catalyst switched in and out of the sample stream.
The catalyst converts CO and CO₂ to methane to produce a total carbon reading. This catalytic reaction relies on the hydrogen (H₂) in the fuel stream.
The hydrocarbon only value is then subtracted from the total carbon concentration to determine the CO / CO₂ reading.
All instrument parameters are reported clearly and continually refreshed on a large, graphical LCD display.
Using analog, digital, and logic output communication capabilities, analytical information from the analyzer can be acquired using an external PC and a simple communications program such as Windows® HyperTerminal or the analyzer can output binary or ASCII formats directly to a data acquisition system or PLC.
Every Baseline 9000 analyzer includes AMETEK MOCON's free PC utility 9000 Keeper used for storing and uploading multiple methods, as well as sending configuration settings, directly to the analyzer.
Features- Automated Control
- Automatic FID ignition
- Electronic back-pressure regulator with sample bypass system
- Automatic calibration at user-defined intervals
- FlowGuard control of fuel, air, and sample with automatic shut-off
- Accurate, continuous, detection
- Hydrocarbon and CO/CO₂ Impurities in ultra-pure gasses
- Versatile Platform
- Graphic LCD display with easy to use menu
- Benchtop or rack-mountable
- Ethernet or serial customizable output
- Programmable analog output ranges
- Programmable relays for diagnostics, concentration, alarms, and events
Specifications
Brand
Detector
- Flame Ionization (FID)
Ranges
- User definable based upon calibration (as methane): 0.1 ppm to 200 ppm
Accuracy, Repeatability
- ± 1 % Full Scale
Drift, Zero
- ± 0.025 % Full Scale, 24 hours
Drift, Span
- ± 1 % Full Scale, 24 hours
Response Time
- T90 < 30 seconds
Sampling
- Internal Single Point, Pressurized Sample
Alarms
- Multilevel Concentration and Fault Alarms, Audible and Visual
Calibration
- Programmable Automatic or Manual Calibration
Support Gas Requirement
- UHP Hydrogen (H₂) - 35 cc/min
- Zero Air - 175 cc/min
- Fuel Blend Options Available
- Span Gas - Methane with CO or CO₂ Typical
Display
- Graphical LCD, 3.4” x 4.5” (8.64 cm x 11.43 cm)
Outputs, Standard
- RS-232
- LAN/Ethernet
- Analog, 4 Programmable 0-20 mA/4-20 mA Isolated Output
- Relays, 14 Programmable Form A Relays Rated to 3A @ 230 Vac
Operating Temperature
- 32° to 104° F (0° to 40° C)
Operating Humidity
- 0 to 95 % (Non-Condensing)
Configuration
- Benchtop or 19” (48.3 cm) Rack-Mount, 3U
Accessories
- Preventive Maintenance Kit - Includes all parts potentially needed on-hand
- Gas Generators - Hydrogen generators, Zero Air generators
- Software - 9000 Keeper provided for method switching
- Service & Support Options - Start-up and training, 1 day onsite
Dimension & Weight
- 5.25” H x 19” W x 16.25” D (13.02 cm x 48.26 cm x 41.28 cm), < 20 lbs (9.07 kg)
Electrical Requirements
- Voltage: 100-240 Vac 50/60 Hz, 1 A
- Industrial Process Analysis & Control
- Beverage Gas Monitoring
- Industrial Gas Mixing Control
- Process Gas Analysis
- Specialty and Industrial Gas Monitoring
- Surface Logging Analysis