Yodify Product Library
Instantly add the K50U Series Wireless Ultrasonic Sensor and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
K50U Series Wireless Ultrasonic Sensor
Brand: Banner EngineeringThe Sure Cross U-GAGE K50U Ultrasonic Sensor works in a variety of environments to provide a measurement of the distance between the target and the sensor.
It is designed for plug-and-play use with the Q45U wireless node, creating a cost-effective and easy-to-use solution for monitoring mobile or remote tanks and totes.
Features- Provides a distance measurement from the target to the sensor.
- Three meter sensing range with a 300 mm dead zone.
- Built-in temperature compensation.
- Rugged design for demanding sensing environments; rated IEC IP67, NEMA 6P.
- Connects using a 1-wire serial interface.
- Designed to work with FlexPower 1-Wire Serial Interface Node models.
- Two sensor models available; one with a 1-wire serial interface and one that functions as a Modbus slave via RS-485.
1 - 2 of 2 Part Numbers
K50UX1RA
- 1-wire Serial Interface - Yes
- Adjustments - Software
- Analog Resolution/Discrete Repeatability - 0.1% of distance (1.5 mm min.)
- Application: Ultrasonic - Yes
- Barrel Diameter (mm) - 50
- Connection - Pigtail QD
- Delay at Power-up (ms) - 10000
- Feature: Chemical Resistant - No
- Feature: Clear Object Detection - Yes
- Feature: Timing (Hold/Delay) - No
- Housing Style - Barrel
- Indicator - LED(s)
- Input/output - Serial
- IO Link - No
- IP Rating - IP67
- Max Discrete (Switched) Output (mA) - 10
- Max Op. Relative Humidity Non-Condensing (%) - 95 at 50°C
- Max Operating Temperature (°C) - 70
- Max Sensing Distance (mm) - 3000
- Mechanical Shock - IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
- Min Operating Temperature (°C) - -40
- Minimum Sensing Distance (mm) - 300
- NEMA Rating - NEMA 6
- Number of Pins - 5
- Output Protection - Protected against short circuit conditions
- Output Saturation Voltage NPN Outputs - < 0.7 V at 20 mA
- Power Supply - 3.5-5.5 V dc
- Power/Current Consumption (exclusive of load) - 180 uA (Default Sensing); 40 uA (Disabled Sensing); 3.3 mA (Active Comms)
- Primary Housing Material - PBT
- QD Type/Cable Length - M12 (Euro) requires mating cordset
- Sensing Beam - Ultrasonic
- Sensing Mode (Detailed) - Time of Flight
- Sensing Mode (General) - Proximity
- Supply Protection Circuitry - Protected against reverse polarity and transient overvoltages
- Temperature Effect (mm/°C) - 0.02% of sensing distance/°C
- Ultrasonic Frequency (kHz) - 114
- Vibration - MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
- Wireless - Yes
K50UX2RA
- Adjustments - Software
- Analog Resolution/Discrete Repeatability - 0.1% of distance (1.5 mm min.)
- Application: Ultrasonic - Yes
- Barrel Diameter (mm) - 50
- Connection - Pigtail QD
- Delay at Power-up (ms) - 10000
- Feature: Chemical Resistant - No
- Feature: Clear Object Detection - Yes
- Feature: Timing (Hold/Delay) - No
- Housing Style - Barrel
- Indicator - LED(s)
- Input/output - Serial (Modbus)
- IO Link - No
- IP Rating - IP67
- Max Op. Relative Humidity Non-Condensing (%) - 95 at 50°C
- Max Operating Temperature (°C) - 70
- Max Sensing Distance (mm) - 3000
- Mechanical Shock - IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
- Min Operating Temperature (°C) - -40
- Minimum Sensing Distance (mm) - 300
- NEMA Rating - NEMA 6
- Number of Pins - 5
- Output Protection - Protected against short circuit conditions
- Power Supply - 3.5-5.5 V dc / 10-30 V dc
- Power/Current Consumption (exclusive of load) - 11.3 mA @ 30 V dc
- Primary Housing Material - PBT
- QD Type/Cable Length - M12 (Euro) requires mating cordset
- RS-485 - Yes
- Sensing Beam - Ultrasonic
- Sensing Mode (Detailed) - Time of Flight
- Sensing Mode (General) - Proximity
- Supply Protection Circuitry - Protected against reverse polarity and transient overvoltages
- Temperature Effect (mm/°C) - 0.02% of sensing distance/°C
- Ultrasonic Frequency (kHz) - 114
- Vibration - MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
- Wireless - Yes
1 - 2 of 2 Part Numbers