Yodify Product Library
Instantly add the WRX900 Wireless Temperature Reciever for WTX700 and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
WRX900 Wireless Temperature Reciever for WTX700
Brand: Status InstrumentsThe WRX900 receiver is used together with the WTX700 in head temperature transmitter for wireless temperature measurement.
The product converts the measured temperature values received into isolated current or voltage signals (0 (4)-20) mA, (0-10 V) as well as making them available via a digital RS485 interface.
The WRX900 will accept wireless signals from up to 16 WTX700 in head transmitters.
Any one of the temperature values received can be linked to any one of the Analog or relay outputs and all are available via the RS485 digital interface.
The product operates using the ISM (Industrial Scientific and Medical) band of 868.4 MHz. This frequency is virtually insensitive to external interferences and allows transmission even in a harsh industrial environment.
The antenna screws into the top of the DIN rail module but for use in cabinets or to gain a better signal, we also offer an antenna extension lead together with an antenna mounting bracket.
Programming is possible by using the Wireless configuration kit.
Alternatively it is possible to programme the product manually using the push buttons and information on the LCD screen.
Features- Receives from up to 16 WTX700 Transmitters
- 300m Line Of Sight Range
- ISM Band 868.4MHz For European Use
- Programmable Current Or Voltage & 2 relay outputs
- RS485 Modbus Communication
- LCD Display
- Low Transmitter Battery Alarm
- Push Button or PC Programmable
Specifications
Brand
Accuracy
- ± 0.1 % (Includes Adjustment, Linearisation, Load Influence & Voltage Supply Influence)
Adjustment
- Push-Buttons
Ambient Temperature Range
- -20° to 50° C (-4° to 122° F), without Condensation (Even with Close Mounting)
Approvals & Certifications
- EMC DIN EN 61326-1
- Flammability: UL 94 V-2
Communication
- Baud Rate: 9,600 bit/sec - for PC Configuration Interface
- Baud Rate: 9,600, 19,200, 38,400 - for RS-485 Interface
- RS-485 Modbus Communication Protocol
- USB
Display
- LCD Display (Top Line: 4-Digit, 7-Segment, 4.5 mm High, Bottom Line: 5-Digit, 16-Segment, 4 mm High)
Electrical Connectors
- Screw Terminal up to 2.5 mm²
Electrical Contacts
- Normally Closed
- Normally Open
Electrical Rating
- 1 A at 230 Vac Resistive
- 3 A at 230 Vac Resistive
Environmental Protection
- IP20 as Per DIN EN 60529
Frequency
- Transmission Frequency: 868.4 MHz, ISM Band (Europe)
Humidity
- 85 % Relative Humidity without Condensation as Per DIN EN 60721-3-3 3K3
Isolation
- 2.3 kVac, Relay to Relay
- 3.7 kVac, Relay to Analog Outputs & Interface
- 50 Vdc
Load
- 10 kiloohms at Voltage Output
- 500 ohms at Current Output
Materials of Construction
- Polyamide
Mounting
- Top Hat Rail Mounting, 35 x 7.5 mm as Per EN 60715
Output
- 0-10 V
- 0-20 mA
Output Format
- Analog Output
- Relay Output: Normally Open (N/O), Configurable as an Normally Closed (N/C)
Power
- 12 VA - Amperage
Response Time
- 0 to 500 milliseconds Min. - for RS-485 Interface
Storage Temperature
- -30° to 70° C (-22° to 158° F)
Supply Voltage
- 110-240 Vac (+10 % / -15 %), 48 to 63 Hz
- 20-30 Vac/Vdc, 48 to 63 Hz
Temperature Coefficient
- ± 0.005 %/°C
Turn-On Time
- 5 seconds - Setting Time after Switching on or Reset
Vibration
- Vibration Resistant: 1 G at 10 to 55 Hz as Per DIN IEC 60068-2-6