Yodify Product Library
Instantly add the LTX03 Continuous Capacitance Level Transmitter and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
LTX03 Continuous Capacitance Level Transmitter
Brand: Intempco Controls, IncThe series LTX03 are highly reliable microprocessor based capacitance level transmitters designed to measure tank levels of liquids and certain dry bulk media in metal tanks.
They measure the change in capacitance that occurs as the tank level changes and outputs a standard loop-powered 4-20 mA signal.
The 4-digit LCD display can be configured to read from 999 to 9999 with a 4-20 mA input signal. The decimal point location and engineering units can be adjusted using membrane switches.
LTX03 transmitters use very high frequency and very low amplitude sensing circuitry to greatly minimize the effects of coating on the sensing probe.
The LTX03 includes a standard 4-20 mA loop-powered LTX transmitter with LCD display installed in a rugged explosion proof enclosure, a mounting fitting and a rigid probe for ranges of up to 12 feet (4 meters).
Probe material supplied is PFA Teflon jacketed or bare SS316. The LTX03 is designed for tanks which have fitting connections of 1/2" NPT or larger.
Features- Continuous loop-powered 4-20 mA operation with 4-digit LCD display
- Microprocessor based
- Accuracy 1% of span for constant dielectric of material
- Non-interactive zero and span calibration
- Calibration accomplished with 4 push buttons
- Heavy duty industrial design
- NEMA rated aluminum, explosion proof housing
- Standard fitting 3/4" NPT, flange and special fittings are available
1 - 1 of 1 Part Numbers
LTX03
- Electronic Module - 4-20 mA, 2-Wire Output Module Installed with 4-Digit LCD Display
- Enclosure - Aluminum Explosion-Proof
- Fitting - Male Pipe Size - 3/4" NPT
- Probe Materials - Teflon Jacketed Solid Probe
- Probe Length - 6 Custom Probe Length in Inches
1 - 1 of 1 Part Numbers
Specifications
Brand
Accuracy
- ± 1 % of Full Span (Constant Dielectric)
- Indication Accuracy: ± 0.1 % of Calibrated Range, ± 1-Digit - LCD Display
Ambient Temperature Range
- -40° to 70° C (-40° to 158° F)
Calibration
- Via 3 Push-Button Membrane Switches - LCD Display
- Via 4 Push-Button Switches Non-interactive Settings
Capacitance
- 10 to 10,000 PF
Damping Adjustment
- 0 to 30 seconds
Display
- 4-Digit LCD Display
Enclosure, Body Material
- Aluminum
Environmental Protection
- Explosion-proof Class I, Div. 1, Groups B, C & D, Class II, III, Div. 1, Groups E, F, G
- IP66
- IP68
- NEMA 4X
Flange Material
- 316 Stainless Steel
Flange Size - 2-1/2” (DN 65)
- 2-1/2” (DN 65) - 150#
Flange Size - 2” (DN 50)
- 2” (DN 50) - 150#
Flange Size - 3” (DN 80)
- 3” (DN 80) - 150#
Flange Size - 4” (DN 100)
- 4” (DN 100) - 150#
Flange Size - 5” (DN 125)
- 5” (DN 125) - 150#
Flange Size - 6” (DN 150)
- 6” (DN 150) - 150#
Flange Type
- Raised Face (RF)
Loop Resistance
- 700 ohms at 24 Vdc, Max.
NPT Connection
- 1” NPT Male
- 1/2” NPT Male
- 1-1/2” NPT Male
- 1-1/4” NPT Male
- 3/4” NPT Male
Output
- 4-20 mA, 2-Wire Loop Powered
Pressure Range
- bar: 1 to 34
- kPa: 100 to 3,400
- psi: 14.5 to 500
Process Temperature
- 200° C (392° F) - Max.
Repeatability
- ± 0.1 % of Span
Response Time
- 75 milliseconds - LCD Display
Sensor, Probe Length
- Probe: 6 to 240” (152.4 to 6,096 mm)
Sensor, Probe Material
- Probe: Bare 316 Stainless Steel
- Probe: PFA Teflon Jacketed
Stability
- Stability over Time: ± 0.1 % of Calibrated Range ± 1-Digit over 6 Months - LCD Display
Supply Voltage
- 12-36 Vdc
Voltage Drop
- 5.5 Vdc at 20 mA - LCD Display
- Water and Water-Based Liquids in Non-Metallic Tanks.
- Jacketed Probes Required for Conductive Media
- Organic Acids
- Oils and Fuels in Metallic and Non-Metallic Tanks
- Use Bare Probes with Non-Conductive Media
- On-Site Calibration Required
- Not Recommended Where Material Dielectric Changes
- Tank must be Conductive or Grounding may be Required.