Yodify Product Library
Add the MIST TSP01 RTD Temperature Transmitter to your store or catalog
Book Your Demo and See How
or create your store
MIST TSP01 RTD Temperature Transmitter
Brand: Intempco Controls, IncTSP RTD Temperature Transmitter is ideal for temperature measurement of liquids and gases in pipes up to 1-1/2" in diameter.
The sensor is conveniently installed into a threated pipe tee made of either brass or stainless steel, making installation completely hassle free.
1 - 1 of 1 Part Numbers
MIST TSP01
- Temperature Range - 0° to 50° C (32° to 122° F)
- Output - 4-20 mA Loop - Upscale Burntout
- Probe Diameter - 1/4"
- Probe Materials - 316/316L Stainless Steel
- Probe Length - 1 Custom Probe Length inches
- Fitting Material - 316/316L Stainless Steel
- Fitting Size - 1/4" NPT
- Extension Cable / Connector Type - M12
- Extension Cable Length 'E' - No Cable
- Extension Cable Length 'E' - 6 Custom Extension Cable Length in Inches
1 - 1 of 1 Part Numbers
Specifications
Brand
Accuracy
- ± (0.10° C (0.18° F) + 0.10 % of Calibrated Span) with Two-Point Calibration
- ± (0.25° C (0.45° F) + 0.40 % of Span) with One-Point Calibration
Cable Material
- PVC
- Teflon
Electrical Connectors
- M12 Micro-Male Connector
Environmental Protection
- IP67 Hermetically Sealed
- NEMA 6P Hermetically Sealed
Input Impedance
- 1,000 ohms Min. (of Measuring Device, for Voltage Output)
Isolation
- 500 Vdc Input/Output
Materials of Construction
- Armor over Teflon Cable, Overbraid & Ferrule: Stainless Steel
- Shrink for Teflon Cable: Polyolefin
NPT Connection
- 1" NPT Male
- 1/2" NPT Male
- 1/4" NPT Male
- 1/8" NPT Male
- 1-1/2" NPT Male
- 1-1/4" NPT Male
- 3/4" NPT Male
- 3/8" NPT Male
Operating Pressure
- Sensor psig: 500 (kPa: 3,447, bar: 34.47)
Operating Temperature
- Housing: -40° to 80° C (-40° to 175° F)
Output
- 0-10 Vdc Linear to Temperature
- 0-5 Vdc Linear to Temperature
- 1-5 Vdc Linear to Temperature
- 4-20 mA Loop-Powered, Linear to Temperature
Power Supply
- 12-32 Vdc Polarity Protected
Power Supply Effect
- 0.001 %/V
Process Connection Material
- Brass
- Stainless Steel
Process Fitting Details
- Hex Fitting
RFI/EMI Effect
- RFI: 1 % or Less Typical
RTD Type
- Pt100
Sensor Circuit
- 2.5 mA Downscale for 4-20 mA Output
- 24 mA Upscale for 4-20 mA Output
Sensor, Probe Connection
- 2-Wire
- 3-Wire
Sensor, Probe Diameter
- 1/4" (6.35 mm)
Sensor, Probe Material
- 316 Stainless Steel
- 316L Stainless Steel
Sensor, Probe Type
- RTD
Stability
- Long Term Drift: ≤ 0.1 % of Full Scale Per Year
Storage Temperature
- -40° to 80° C (-40° to 176° F)
Temperature Effect
- ± 0.001 % of Span/°C
Temperature Range
- -50° to 200° C (-58° to 392° F)
Update Time
- Warm-Up: 30 seconds
Wetted Materials
- 316 Stainless Steel, Dual Certified
- 316L Stainless Steel, Dual Certified