Yodify Product Library
Instantly add the FA-E In-Line Deflagration Flame Arrester and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
FA-E In-Line Deflagration Flame Arrester
Brand: PROTEGOThe Protego FA-E series of in-line deflagration flame arresters is designed with an eccentric housing to automatically drain condensate build up in the housing.
Due to its eccentric design the device can be installed in pipelines that run close to floors or walls and low points, where condensate can collect within the piping system, can be avoided.
When installing the deflagration flame arrester, make sure that the distance between potential ignition sources and the location of the installed device, does not exceed the L/D ratio (Pipe length/pipe diameter), for which the device was approved.
According to EN ISO 16852 the installation limits are (L/D) maximum ≤50 for deflagration flame arresters of explosion groups IIA and IIB3 (NEC groups D to C) and (L/D) maximum ≤30 for explosion group IIC (NEC group B).
Features- Eccentric design prevents condensate build up
- Special design for elevated operating temperatures and pressures available
- Modular design enables each individual FLAMEFILTER to be replaced
- Service friendly: FLAMEFILTER can be cleaned easily
- Eccentric design eases installation close to floors and walls
- Bidirectional flame transmission proof design
- Protects against deflagrations for all explosion groups IIA, IIB3 and IIC (NEC groups D, C and B)
Specifications
Brand
Approvals & Certifications
- ISO 16852, 6358 & 16016
- TÜV (Technischer Uberwachungsverein)
Approvals & Certifications
- ATEX
- CEN
- IEC
- NEC Groups B, C, D
Enclosure Finish
- ECTFE Coating
Enclosure, Body Material
- Carbon Steel
- Hastelloy
- Stainless Steel
- Steel
Flange Size - 1-1/2” (DN 40)
- 1-1/2” (DN 40) - 150# ASME B16.5
Flange Size - 1-1/4” (DN 32)
- 1-1/4” (DN 32) - 150# ASME B16.5
Flange Size - 1” (DN 25)
- 1” (DN 25) - 150# ASME B16.5
Flange Size - 10” (DN 250)
- 10” (DN 250) - 150# ASME B16.5
Flange Size - 12” (DN 300)
- 12” (DN 300) - 150# ASME B16.5
Flange Size - 2-1/2” (DN 65)
- 2-1/2” (DN 65) - 150# ASME B16.5
Flange Size - 2” (DN 50)
- 2” (DN 50) - 150# ASME B16.5
Flange Size - 3” (DN 80)
- 3” (DN 80) - 150# ASME B16.5
Flange Size - 4” (DN 100)
- 4” (DN 100) - 150# ASME B16.5
Flange Size - 5” (DN 125)
- 5” (DN 125) - 150# ASME B16.5
Flange Size - 6” (DN 150)
- 6” (DN 150) - 150# ASME B16.5
Flange Size - 8” (DN 200)
- 8” (DN 200) - 150# ASME B16.5
Flange Type
- Raised Face (RF)
- Smooth Finish
Gasket Material
- PTFE
Materials of Construction
- Flamefilter Cage: Steel
- Flamefilter, Spacer: Hastelloy
- Flamefilter, Spacers: Stainless Steel
- Flamefilter: Copper
- Flamefilter: Inconel
- Flamefilter: Tantalum
Operating Pressure
- psi: 0 to 23.2 (kPa: 0 to 160, bar: 0 to 1.6)
Operating Temperature
- 0° to 60° C (32° to 140° F)
Pressure Type
- Absolute