Yodify Product Library
Instantly add the Enphase IQ7+ 295W Microinverter and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
Enphase IQ7+ 295W Microinverter
Brand: Enphase EnergyEnphase’s seventh-generation solar micro inverters are based on a software-defined architecture that allows for a cost-effective design with a single hardware SKU available globally. Compared to the IQ 6 series, the IQ 7 Micro series produces 4% more fuel, is 19% lighter, and is 17% smaller. With innovative 2-wire cabling, the IQ 7 Micro Series retains the same ease of installation. It also makes use of semiconductor integration to improve reliability and scale economies. The Enphase IQ7-60-2-US IQ Microinverter™ is a high-powered smart grid-ready solar micro inverters that dramatically simplifies the installation process while achieving the highest device performance. Since it’s part of the Enphase IQ System, this microinverter can operate in tandem with the Enphase IQ Envoy™, Enphase Q Aggregator™, Enphase IQ Battery™, and Enphase Enlighten™ monitoring and analysis program. The IQ Series solar micro inverters build on previous generations’ durability by undergoing over a million hours of power-on testing, allowing Enphase to give an industry-leading warranty of up to 25 years.
Features- Lightweight and simple
- Faster installation with improved, lighter two-wire cabling
- Optimized for high powered 60/72-cell modules
- More than a million hours of testing
- Class II double-insulated enclosure
- Complies with advanced grid support, voltage, and frequency ride-through requirements
- Remotely updates to respond to changing grid requirements
- Configurable for varying grid profiles
Specifications
Brand
Commonly Used Module Pairings
- 235 W - 440 W +
Module Compatibility
- 60 Cell & 72 Cell PV Modules
Maximum Input DC Voltage
- 60 V
Peak Power Tracking Voltage
- 27 V - 45 V
Operating Range
- 16 V - 60 V
Min/Maximum Start Voltage
- 22 V / 60 V
Maximum DC Short Circuit Current (Module Isc)
- 15 A
Overvoltage Class DC Port
- II
DC Port Backfeed Under Single Fault
- 0A
Peak Output Power
- 295 VA
Maximum Continuous Output Power
- 290 VA
Nominal (L-N) Voltage/Range
- 230 V / 184 V - 276 V
Maximum Continuous Output Current
- 1.26A
Nominal Frequency
- 50 Hz
Extended Frequency Range
- 45 Hz - 55 Hz
Maximum Units Per 20A (L-N) Branch Circuit
- 13 (230 Vac)
Overvoltage Class AC Port
- III
AC Port Backfeed Current
- 0A
Power Factor Setting
- 1.0
Power Factor (Adjustable)
- 0.8 leading... 0.8 lagging
EN 50530 (EU) Weighted Efficiency
- 96.5%
Ambient Temperature Range
- -40° C to +65° C
Relative Humidity Range
- 4 % to 100 % (Condensing)
Connector Type
- MC4
Dimensions (W x H x D)
- 212 mm x 175 mm x 30.2 mm (Without Bracket)
Weight
- 1.08 kg
Cooling
- Natural Convection - No Fans
Approved for Wet Locations
- Yes
Pollution Degree
- PD3
Enclosure
- Class II Double-Insulated, Corrosion Resistant Polymeric Enclosure
Environmental Category / UV Exposure Rating
- Outdoor - IP67
Communication
- Power Line Communication (PLC)
Monitoring
- Enlighten Manager and MyEnlighten Monitoring Options
- Compatible with Enphase Envoy-S
Compliance (Pending)
- AS 4777.2
- IEC/EN 61000-6-3
- RCM
- IEC/EN 62109-1
- IEC/EN 62109-2