Yodify Product Library
Instantly add the PMP Differential Pressure Sensor and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
PMP Differential Pressure Sensor
Brand: KOBOLD Instruments, IncThe differential pressure sensor PMP is used for controlling and measuring the differential pressure of air or non-corrosive gases. It is mainly used for the monitoring of filters or filter cartridges measuring the pressure difference before and after the filter chamber.
Cleaning cycles can be determined by means of the programmable relay. If a predefined differential pressure is reached, the rinsing process can be started e.g. automatically via the solenoid valves, and the second relay produces an alarm if the differential pressure increases further on.
Thus, the cleaning cycles can be optimized and considerable quantities of compressed air can be saved.
The differential pressure is shown on a four-digit display. For a remote transmission, a 4-20 mA output signal is provided. The device is controlled by a micro processor. Relay, hysteresis, time delay of the relays and Analog output are freely programmable.
Features- Compact Size
- 4-Digit LED-Indication
- 2 Programmable Relays
- 4 - 20 mA Output
- Easy Installation
Specifications
Brand
Accuracy
- 1 % (0.5 Mbar) - Measuring
- 1 % of Full Scale
Ambient Temperature Range
- -10° to 60° C (14° to 140° F)
Connectors
- 2 Hose Connectors for Pipe 6 x 8 mm
Diameter
- 2.5 mm², Max.
Enclosure / Body Material
- Polycarbonate
Environmental Protection
- IP65
Indication
- 4-Digit LED, 15 mm High
Input Power
- 4 VA
Load Impedance
- 500 ohms
Maximum System Pressure
- psi: 10.88 (kPa: 75, Mbar: 750)
Output
- 4-20 mA
Power Requirement
- 0.5 A - 2 Relays
- Maximum
Pressure Range
- mmWC: 0 to 500 (psi: 0 to 0.73, kPa: 0 to 5, Mbar: 0 to 50)
Resolution
- 0.1 mmH₂O
Supply Voltage
- 110 Vac 50/60 Hz
- 230 Vac 50/60 Hz
- 24 Vac 50/60 Hz
- 24 Vdc
- Chemical industries
- Tank construction