Yodify Product Library
Add the MC–Series Gas Mass Flow Controller to your store or catalog
Book Your Demo and See How
or create your store
MC–Series Gas Mass Flow Controller
Brand: Alicat ScientificMC-Series Gas Mass Flow Controllers rapidly reach setpoints and maintain stable control of mass flow, volumetric flow, or pressure for 98+ gases across a very wide flow range – 0.01% to 100% of full scale. Highly customizable for easy integration.
Devices are custom ranged from 0.5 SCCM full scale to 5,000 SLPM full scale.
Features- Multi-variable process measurements: Simultaneously measure mass flow, volumetric flow, gas pressure, and gas temperature
- User changeable units of measurement: Change the unit of measurement for pressure, flow, or temperature from our extensive list of engineering units
- Gas Select: Select your process gas from any of the 98+ preloaded NIST-traceable gas calibrations in our gas list
- Composer™: Define 20 custom gas mixtures of up to 5 constituent gases using our Composer™ firmware
- Monochrome backlit LCD with integrated touchpad: Easily read measurements using the backlit display and control configurations with the user-friendly integrated touchpad
- User adjustable setpoint ramping & limits: Configurable ramp rates allow the process variable to be controlled as fast or as slow as desired, and configurable setpoint limits protect processes from inadvertent setpoint changes
- User adjustable standard temperature and pressure (STP) conditions: Quickly change reference conditions without need for recalibration
- Valve close override and valve open override: Utilize alarms to quickly vent your system or stop all flow as needed
Specifications
Brand
STP Reference Condition
- 25° C & 1 atm
NTP Reference Condition
- 0° C & 1 atm
Display
- Monochrome LCD or Color TFT Display with Integrated Touchpad
Environmental Protection
- IP40
Humidity
- 0 to 95 % Non-Condensing
Wetted Material
- 302, 303, 304, 316L & 430FR Stainless Steel
- FKM
- Alumina Ceramic
- Brass
- Glass
- Gold
- Heat-cured Epoxy
- Heat-cured Silicone Rubber,
- Polyamide
- Silicon
Operating Pressure
- 11.5 to 175 psia Common Mode Pressure
- 11.5 to 75 psia Differential Pressure
Communication
- RS-485 Serial
- Modbus RTU (Over RS-232 or RS-485)
- Modbus TCP/IP
- DeviceNet
- EtherCAT
- EtherNet/IP
- Profibus
Power Requirement
- 12-24 Vdc, 250 mA (290 mA If Equipped with 4-20 mA Output)
Mass Flow Accuracy
- 10 sccm Full Scale Through 20 slpm: ± 0.6 % of Reading & ± 0.1 % of Full Scale at Calibration Conditions, High Accuracy Option - ± 0.5 % of Reading or ± 0.1 % of Full Scale, whichever is greater
- 0.5 to 5 sccm Full Scale & 5 to 5000: ± 0.6 % of Reading & ± 0.1 % of Full Scale at Calibration Conditions, High Accuracy Option - ± 0.5 % of Reading or ± 0.1 % of Full Scale
Repeatability (2σ)
- 0.5 to 5 sccm Full Scale & 50 to 5000 slpm Full Scale: ± (0.2 % of Reading + 0.02 % of Full Scale)
- 10 to 20 sccm Full Scale: ± (0.1 % of Reading + 0.02 % of Full Scale)
Accuracy
- Temperature: ± 0.75° C
- Pressure: ± 0.5 % of Reading
- Analog Signal: ± 0.1 % of Full Scale Additional Uncertainty
Operating Temperature
- -10° to 60° C
Response Time
- Sensor: < 1 ms
- Typical Indication: < 10 ms, Flow Rate Dependent
Operating Pressure Full Scale
- 160 psia
Analog I/O
- 4-20 mA, 0-5 Vdc, 1-5 Vdc, 0-10 Vdc
Totalizer Volume Uncertainty
- ± 0.5 % of Reading in Additional Uncertainty
Steady State Control Range
- 0.01 to 100 % of Full Scale
Typical Control Response Time
- 30 ms or 100 ms
Valve Function
- Normally Closed