Unmanaged Switch Series 9721/13-42-x4

Ambient Conditions

• Ambient temperature - -30 °C ... +70 °C
• Ambient temperature max. - +70 °C
• Ambient temperature min. - -30 °C
• Relative humidity max. - < 95% (no condensation)
• Storage temperature - -40 °C ... +85 °C
• Storage temperature max. - +85 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Current consumption max. - 500 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption max. - 6.40 W
• Power supply - 4-pole screw terminal

Device Specific Data

• operating mode - Half duplex

Electrical Data

• Connection Ethernet Interface - RJ 45 plug connector
• FO attenuation - 1 dB / km
• FO bandwidth - 800 Mhz * km 500 Mhz * km
• FO Connection type - SC plug connector
• FO Fibre cross-section - (62,5/125 µm [OM1]), (62,5/125 µm [OM1]) 50/125µm [OS3, OS4]
• FO fibre type - Multi mode
• FO optical budget - 12 dB
• FO transmission distance - 4 km, 5 km
• Interface 1 - 4 Port, 100 Base-FX MM SC
• Interface 2 - 2 Port, 100 Base-TX Cu, RJ45
• operating mode - half duplex, full duplex Auto-MDI(X)
• Redundant supply - Yes
• Transfer rate - 10/100 Mbit/s Auto-Negotiation
• Transmission distance - Up to 100 m (Cat5e or better)
• Voltage range DC - 12 - 30 V DC
• Wavelength optical interface - 1310 nm

Explosion Protection

• Ambient temperature °C - -30 - 70 °C
• Application range (zones) - 2, 22
• ATEX dust certificate - TÜV 16 ATEX 7742 X
• ATEX gas certificate - TÜV 16 ATEX 7742 X
• Certificate EAC - TS RU S-DE.ME92.B.00915
• Certificates - ATEX (TUR), Canada (FM), EAC (Sertium), IECEx (TUR), India (PESO), USA (FM)
• Dust explosion protection ATEX - II (1) D [Ex op is Da] IIIC
• Dust explosion protection EAC - [Ex op is Da] IIIC X
• Dust explosion protection IECEx - [Ex op is Da] IIIC
• Gas explosion protection ATEX - II 3 (1) G Ex nA [op is T6 Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex e [op is T6 Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA [op is T6 Ga] IIC T4 Gc
• IECEX dust certificate - IECEx TUR 16.0002 X
• IECEX gas certificate - IECEx TUR 16.0002 X
• Installation - Zone 2

General

• Description - Unmanaged Switch FX op is to TX; SC plug connector FO cable 4 multi mode (MM), 2 RJ45, Installation in Zone 2
• Functional Description - The 9721 unmanaged switch is designed for linking electrical Ethernet networks (TX) and fibre optic (FX) based networks. The fibre optics are used for operation in hazardous areas of Zone 0, 1, 2, 20, 21 and 22 with the type of protection "Ex op is" (IEC/EN 60079-28). Therefore, conventional fibre optic cables can also be used in hazardous areas and may be connected and disconnected during operation (hot-swap). The unmanaged switch has 2 TX ports and 4 FX op is ports. Redundant supply can be provided. Compatible with: Remote I/O IS1+, HMI Series ET/MT-xx6-A-FX and ET/MT-4x8, as well as for IP network cameras.
• Highlights - For operation of up to four inherently safe fibre optic cables „op is“ according to IEC 60079-28 For 100 Mbit/s Industrial Ethernet Transmission range up to 5 km (multi mode) or up to 30 km (single mode) Extended temperature range -30 ...+70 °C Redundant supply Installation in Zone 2 or in the safe area
• Product Description - Unmanaged switch FX op is / TX SC for Zone 2 Multi mode
• Product Type - 9721/13-42-14
• Product Variant - Unmanaged Switch FX op is / TX SC
• Title Product Variant Technical Data - 9721/13-42-14 Switch unmgd opis SC MM
• WebCode - 9721B

Mechanical Data

• Connection cross section max. - 2.50 mm²
• Connection cross-section min. - 0.08 mm²
• Degree of protection (IP) - IP20
• Enclosure material - Stainless steel, powder-coated
• Pollutant class - Corresponds to G3
• Weight - 0.500 kg

Mounting / Installation

• Mounting position - any
• Mounting type - On 35 mm DIN rail
• stripping length - 7 mm
• Tightening torque - 0.50 N/m

Safety Data

• Max. FO radiant power - ≤ 15 mW

Ambient Conditions

• Ambient temperature - -30 °C ... +70 °C
• Ambient temperature max. - +70 °C
• Ambient temperature min. - -30 °C
• Relative humidity max. - < 95% (no condensation)
• Storage temperature - -40 °C ... +85 °C
• Storage temperature max. - +85 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Current consumption max. - 500 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption max. - 6.40 W
• Power supply - 4-pole screw terminal

Device Specific Data

• operating mode - Half duplex

Electrical Data

• Connection Ethernet Interface - RJ 45 plug connector
• FO attenuation - 0.3 dB / km
• FO bandwidth - 3.5 ps / nm * km
• FO Connection type - SC plug connector
• FO Fibre cross-section - 9/125 µm (OS1, OS2)
• FO fibre type - Single mode
• FO optical budget - 16 dB
• FO transmission distance - 30 km
• Interface 1 - 4 Port, 100 Base-FX SM SC
• Interface 2 - 2 Port, 100 Base-TX Cu, RJ45
• operating mode - half duplex, full duplex Auto-MDI(X)
• Redundant supply - Yes
• Transfer rate - 10/100 Mbit/s Auto-Negotiation
• Transmission distance - Up to 100 m (Cat5e or better)
• Voltage range DC - 12 - 30 V DC
• Wavelength optical interface - 1300 nm

Explosion Protection

• Ambient temperature °C - -30 - 70 °C
• Application range (zones) - 2, 22
• ATEX dust certificate - TÜV 16 ATEX 7742 X
• ATEX gas certificate - TÜV 16 ATEX 7742 X
• Certificate EAC - TS RU S-DE.ME92.B.00915
• Certificates - ATEX (TUR), Canada (FM), EAC (Sertium), IECEx (TUR), India (PESO), USA (FM)
• Dust explosion protection ATEX - II (1) D [Ex op is Da] IIIC
• Dust explosion protection EAC - [Ex op is Da] IIIC X
• Dust explosion protection IECEx - [Ex op is Da] IIIC
• Gas explosion protection ATEX - II 3 (1) G Ex nA [op is T6 Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex e [op is T6 Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA [op is T6 Ga] IIC T4 Gc
• IECEX dust certificate - IECEx TUR 16.0002 X
• IECEX gas certificate - IECEx TUR 16.0002 X
• Installation - Zone 2

General

• Functional Description - The 9721 unmanaged switch is designed for linking electrical Ethernet networks (TX) and fibre optic (FX) based networks. The fibre optics are used for operation in hazardous areas of Zone 0, 1, 2, 20, 21 and 22 with the type of protection "Ex op is" (IEC/EN 60079-28). Therefore, conventional fibre optic cables can also be used in hazardous areas and may be connected and disconnected during operation (hot-swap). The unmanaged switch has 2 TX ports and 4 FX op is ports. Redundant supply can be provided. Compatible with: Remote I/O IS1+, HMI Series ET/MT-xx6-A-FX and ET/MT-4x8, as well as for IP network cameras.
• Highlights - For operation of up to four inherently safe fibre optic cables „op is“ according to IEC 60079-28 For 100 Mbit/s Industrial Ethernet Transmission range up to 5 km (multi mode) or up to 30 km (single mode) Extended temperature range -30 ...+70 °C Redundant supply Installation in Zone 2 or in the safe area
• Product Description - Unmanaged switch FX op is / TX SC for Zone 2 Single mode
• Product Type - 9721/13-42-54
• Product Variant - Unmanaged Switch FX op is / TX SC
• Title Product Variant Technical Data - 9721/13-42-54 Switch unmgd opis SC SM
• WebCode - 9721B

Mechanical Data

• Connection cross section max. - 2.50 mm²
• Connection cross-section min. - 0.08 mm²
• Degree of protection (IP) - IP20
• Enclosure material - Stainless steel, powder-coated
• Pollutant class - Corresponds to G3
• Weight - 0.500 kg

Mounting / Installation

• Mounting position - any
• Mounting type - On 35 mm DIN rail
• stripping length - 7 mm
• Tightening torque - 0.50 N/m

Safety Data

• Max. FO radiant power - ≤ 15 mW

Ambient Conditions

• Ambient temperature - -30 °C ... +70 °C
• Ambient temperature max. - +70 °C
• Ambient temperature min. - -30 °C
• Relative humidity max. - < 95% (no condensation)
• Storage temperature - -40 °C ... +85 °C
• Storage temperature max. - +85 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Current consumption max. - 500 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption max. - 6.40 W
• Power supply - 4-pole screw terminal

Device Specific Data

• operating mode - Half duplex

Electrical Data

• Connection Ethernet Interface - RJ 45 plug connector
• FO attenuation - 0.3 dB / km 1 dB / km
• FO bandwidth - 500 Mhz * km 800 Mhz * km
• FO Connection type - SC plug connector
• FO Fibre cross-section - (62,5/125 µm [OM1]), (62,5/125 µm [OM1]) 50/125µm [OS3, OS4] 9/125 µm (OS1, OS2), 50/125µm [OS3, OS4]
• FO fibre type - Multi mode/single mode
• FO optical budget - 16 dB
• FO transmission distance - 30 km, 4 km, 5 km
• Interface 1 - 4 Port, 100 Base-FX SM/MM SC
• Interface 2 - 2 Port, 100 Base-TX Cu, RJ45
• operating mode - half duplex, full duplex Auto-MDI(X)
• Redundant supply - Yes
• Transfer rate - 10/100 Mbit/s Auto-Negotiation
• Transmission distance - Up to 100 m (Cat5e or better)
• Voltage range DC - 12 - 30 V DC
• Wavelength optical interface - 1300, 1310 nm

Explosion Protection

• Ambient temperature °C - -30 - 70 °C
• Application range (zones) - 2, 22
• ATEX dust certificate - TÜV 16 ATEX 7742 X
• ATEX gas certificate - TÜV 16 ATEX 7742 X
• Certificate EAC - TS RU S-DE.ME92.B.00915
• Certificates - ATEX (TUR), Canada (FM), EAC (Sertium), IECEx (TUR), India (PESO), USA (FM)
• Dust explosion protection ATEX - II (1) D [Ex op is Da] IIIC
• Dust explosion protection EAC - [Ex op is Da] IIIC X
• Dust explosion protection IECEx - [Ex op is Da] IIIC
• Gas explosion protection ATEX - II 3 (1) G Ex nA [op is T6 Ga] IIC T4 Gc
• Gas explosion protection EAC - 2 Ex e [op is T6 Ga] IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA [op is T6 Ga] IIC T4 Gc
• IECEX dust certificate - IECEx TUR 16.0002 X
• IECEX gas certificate - IECEx TUR 16.0002 X
• Installation - Zone 2

General

• Functional Description - The 9721 unmanaged switch is designed for linking electrical Ethernet networks (TX) and fibre optic (FX) based networks. The fibre optics are used for operation in hazardous areas of Zone 0, 1, 2, 20, 21 and 22 with the type of protection "Ex op is" (IEC/EN 60079-28). Therefore, conventional fibre optic cables can also be used in hazardous areas and may be connected and disconnected during operation (hot-swap). The unmanaged switch has 2 TX ports and 4 FX op is ports. Redundant supply can be provided. Compatible with: Remote I/O IS1+, HMI Series ET/MT-xx6-A-FX and ET/MT-4x8, as well as for IP network cameras.
• Highlights - For operation of up to four inherently safe fibre optic cables „op is“ according to IEC 60079-28 For 100 Mbit/s Industrial Ethernet Transmission range up to 5 km (multi mode) or up to 30 km (single mode) Extended temperature range -30 ...+70 °C Redundant supply Installation in Zone 2 or in the safe area
• Product Description - Unmanaged switch FX op is / TX SC for Zone 2 Multi mode/single mode
• Product Type - 9721/13-42-74
• Product Variant - Unmanaged Switch FX op is / TX SC
• Title Product Variant Technical Data - 9721/13-42-74 Switch unmgd opis SC SMM
• WebCode - 9721B

Mechanical Data

• Connection cross section max. - 2.50 mm²
• Connection cross-section min. - 0.08 mm²
• Degree of protection (IP) - IP20
• Enclosure material - Stainless steel, powder-coated
• Pollutant class - Corresponds to G3
• Weight - 0.500 kg

Mounting / Installation

• Mounting position - any
• Mounting type - On 35 mm DIN rail
• stripping length - 7 mm
• Tightening torque - 0.50 N/m

Safety Data

• Max. FO radiant power - ≤ 15 mW