Yodify Product Library
Instantly add the S-Type F2351/F23CA Force Transducer and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
S-Type F2351/F23CA Force Transducer
Brand: Tecsis
The S-type is a conventional design of tension/compression force transducer.
It has internal threads which allow force to be easily introduced via suitable swivel heads.
The factory-internal calibration is performed in tension and compression directions: 4-20 mA and 0-10 V respectively.
The zero signal is thus around 12 mA and 5 V respectively.
Calibrations in the tension or compression direction only are of course possible at no extra charge.
The S-type has a connector plug on the broad side of the body. With an angled cable socket, the cable runs parallel to the direction of force.
This allows space-saving and protected installation on plant and machinery.
Features- Thin film implants
- Stainless steel (1.4542)
- Integrated amplifier
- Small temperature drift
- High long term stability
- High shock and vibration resistance
- For dynamic or static measurements
- Good repeatability
- Easy assembly
- Very small effect of temperature gradient
Specifications
Brand
Accuracy
- ≤ 0.2 %
Applications
- Automated Manufacturing
- Chemical & Petrochemical
- Construction of Plant & Machinery
- Dedusting & Filtration Units
- Engagement Forces in Machinery
- Hoisting Gear
- Industrial Applications
- Mining
Approvals & Certifications
- EN 61326
- ISO 9001: 2015 Certified
Approvals & Certifications
- ATEX Ex II 2 G Ex Ib IIC T4/T3
- ATEX/IECEX for Zone 1 & 2
- UL
Distance
- Nominal Measuring Distance: < 0.5 mm
Electrical Connectors
- Round Connector M12 x 1, 4-Pole
Electrical Protection
- Overvoltage
- Reverse Polarity
- Short Circuit Protected
Enclosure, Body Material
- Stainless Steel
Environmental Protection
- IP67
Hysteresis
- Relative Reversal Span: ≤ ± 0.1 % of Full Scale
Insulation Resistance
- > 5 GigaOhms / 50 V
Load Limit
- Breaking Strength: > 300 % Fnom
- Limiting Force: 150 % Fnom
Measuring Error
- Combined Error: ≤ ± 0.2 % of Full Scale
Measuring Range
- Tension/Compression Forces from 2 to 50 KN
Operating Temperature
- -40° to 80° C (-40° to 176° F)
Output
- Analog Output: 0-10 V - 3-Wire System
- Analog Output: 4-20 mA - 2-Wire System
- Voltage Output: Approximately 8 mA
Power Requirement
- 10-30 Vdc for Current Output
- 14-30 Vdc for Voltage Output
Response Time
- ≤ 1 millisecond (within 10 % to 90 %)
Sensitivity
- Temperature Sensitivity-Characteristic: ≤ ± 0.2 % of Full Scale/10K
Span & Zero Effect
- Zero Signal: ≤ ± 0.2 % of Full Scale/10K
Storage Temperature
- -40° to 85° C (-40° to 185° F)
Temperature Range
- Nominal -20° to 80° C (-4° to 176° F)
Vibration
- Immunity: 20 G, 100 Hr, (50 to 150 Hz) According to DIN EN 60068-2-6
- Automated Manufacturing
- Chemical & Petrochemical
- Construction of Plant & Machinery
- Dedusting & Filtration Units
- Engagement Forces in Machinery
- Hoisting Gear
- Industrial Applications
- Mining