Yodify Product Library
Add the Tandem-Link to your store or catalog
Book Your Demo and See How
or create your store
Tandem-Link
Brand: Heat-LineTandem-Link systems are inter-connecting advanced, self-regulating trace heating systems that are used for efficient and reliable external pipe freeze protection.
Tandem-Link pipe warmer systems are factory finished, job-ready and plug directly into one another, allowing on-site length flexibility without the requirement of an electrician for field splicing and terminating.
Tandem-Link is suitable for the installation on the outside of both metallic and non-metallic pipes of many diameters.
The Tandem-Link product is suitable for use in many different applications including cold weather construction requiring permanent or temporary water or fluid pipe heating.
Features- Can use up to 3 units to adjust length as required
- Can be installed on all metallic and non-metallic pipes, tanks and vessels
- Provides reliable freeze protection of all pipe diameters (when properly measured and installed)
- Easily and quickly installed on most pipes without their removal
- Can be fully insulated to increase energy efficiency
- Can be used with a variety of control devices including timers and thermostats
- Available in 5ft. (1.5m) increments to a maximum length of 410ft. (125m)
Specifications
Brand
Approvals
- cCSAus approved (Canada and USA) LR85446
- Wetguard Male and Female plug ends certified for wet location NEMA Type 4, 4X, 6, 6P
- Freeze Protection Designation Installation Type A USA
- Freeze Protection Designation Usage W Canada
Electrical Specifications
- GFCI Circuit Protection is Required to be applied on-site as per the Canadian and US Electrical codes
- All models on opposite end: 2 ft (0.6 m), 14 AWG SJEOOW with Leviton Female wetguard Connector
- CS models: 2 ft (0.6 m), 14 AWG SJEOOW lead with Leviton Male wetguard Connector
- 240 V GFC models: 6 ft (1.8 m) Power Supply lead with 27 milliamp GFCI plug-in device
- 120 V GFC models: 4 feet (1.2 m) Power Supply lead with 27 milliamp GFCI plug-in device
- Maximum of 3 Connected cables
- 240 V systems - 5 watt/ft. (15 w/m) at 50° F (10C) max. Connected length 410 ft (125 m)
- 120 V systems - 5 watt/ft. (15 w/m) at 50° F (10C) max. Connected length of 205 ft (62 m)
- Self-Regulating/Conductive Polymer Heating Cable
- Thermo Plastic Elastomer (TPE) jacket Heating cable
Other Specifications
- Nominal Heating cable thickness 0.25 in. (6.4 mm) / width 0.425 in.(10.8 mm)
- Thermo Plastic Elastomer (TPE) jacket Heating cable
- Applicable for multiple pipe diameters and both Non-metallic and metallic piping
- External Pipe Freeze Protection
- Suitable for exposure Temperatures up to 150F (65C)
- Manufactured in North America
Tandem-Link is an external heat tracing system designed to provide permanent or temporary reliable freeze protection of metallic and non-metallic pipes. Examples include but not limited to
- Existing water supply lines subject to freezing
- Small diameter water supply lines
- Large diameter pipes and hoses
- All metallic and non-metallic pipes
- Sewage, septic and effluent pipes