Yodify Product Library
Instantly add the OMH Screw Spindle-Meter and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
OMH Screw Spindle-Meter
Brand: KOBOLD Instruments, IncThe KOBOLD screw-type volumetric flowmeter based on the principle of positive displacement was developed in response to the need to measure and control viscous media.
It was specially designed to measure viscous media with non-abrasive properties. Variations in viscosity in the range 1 to 5000 mm2/s have no effect on measurement results within the measuring accuracy.
The KOBOLD screw-type volumetric flowmeter satisfies the stringent demands for greater accuracy, reliability and economic efficiency. Two spindles with cycloidal profiles form the basis of the screw-type volumetric flowmeter.
Spindles manufactured with extreme precision are supported at each end with a ball bearing.
The axially forced measuring medium causes the spindles to rotate uniformly.
The rotary motion is picked off with sensors and converted to a frequency signal. An exact measurement of the delivered flow volume is obtained with the volumetrically defined measuring chambers.
Combined with downstream evaluation electronics, the KOBOLD screw-type volumetric flowmeter becomes a flexible measurement and control system for viscous media.
Specifications
Brand
Applications
- Chemical Industry: Acids & Iyes, Ethyl Alcohol, Freon
- Food Industry: Margarine, Fats, Liqueur, Oils
- Furnaces: EL Heating Oil, S Heating Oil, Diesel Oil
- Hydraulics: Hydraulic Oil, Lubricating Oil, Gear Oil
- Mixing & Dosing Systems: Polyhydroxy Alcohol, Isocyanate Additives for Gasoline, Cement
- Printing Inks
- Tests Stands
BSP Connection
- G 1”
- G 1/2”
- G 1-1/2”
- G 2”
- G 3/4”
- G 4”
Cable Length
- 9.84 feet (3 metres) - PTFE Cable
Electrical Connectors
- 9.84 feet (3 metres) PTFE Cable
Enclosure / Body Material
- Ductile Iron
Environmental Protection
- IP65
- IP67
- IP68
Flange Material
- Steel 1.7139
Flange Size - 1-1/2” (DN 40)
- 1-1/2” (DN 40) - PN 400
Flange Size - 1” (DN 25)
- 1” (DN 25) - PN 400
Flange Size - 1/2” (DN 15)
- 1/2” (DN 15) - PN 400
Flange Size - 2” (DN 50)
- 2” (DN 50) - PN 400
Flange Size - 4” (DN 100)
- 4” (DN 100) - PN 250
Materials of Construction
- Ceramic - Dry Sleeve
O-Ring Material
- FPM
Operating Temperature
- -20° to 200° C (-4° to 392° F)
Supply Voltage
- 10-30 Vdc
- 5-25 Vdc
Switch Type
- NAMUR
- PNP
Thread
- M18 x 1 with O-Ring in the Case