Yodify Product Library
Instantly add the 8709 Liquid Flow Meter and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
8709 Liquid Flow Meter
Brand: Burkert Fluid Control SystemsType 8709 is an instrument for liquid flow measurement in process technology. The actual value supplied by the sensor is transmitted through the digital electronics and over a standard signal output or a field bus interface.
In the device two calibration curves can be stored, which the user is able to switch between. Mass Flow Communicator software can be used for parameterization and diagnosis.
Specifications
Accuracy
- ± 0.5 % of Full Scale
- ± 1.5 % of Reading
Ambient Temperature Range
- 0° to 55° C (32° to 131° F)
Applications
- Bio Reactors
- Fuel Cell Technology
- Heat Treatment
- Liquid Level Measurement
- Machine Tools
- Material Coatings
- Packaging Technology
BSP Connection
- G 1/4” Female
- G 1/8” Female
Communication
- DeviceNet Bus
- Digital
- FOUNDATION Fieldbus, CAN Open
- PROFIBUS DP V1
Consumption
- Power Consumption: 5 W with Fieldbus Version
- Power Consumption: Max.
Electrical Connectors
- D-Sub 15-Pin Connector
- M12 Plug, 5-Pin Socket with Fieldbus
- Round Socket, 8-Pin
Enclosure, Body Material
- PBT
- Stainless Steel
Environmental Protection
- Protection Class: IP65
Flow Rate
- Full Scale Range: 0.015 to 0.6 LPM Water
- Full Scale Range: 0.9 to 36 L/hr
Indication
- LED Indication Power, Communication, Limit & Error
Media
- Clean & Low Viscous Liquids
- Water
Mounting Position
- Horizontal
- Vertical
NPT Connection
- 1/4” NPT Female
- 1/8” NPT Female
Operating Pressure
- Maximum
- Typical, Max.
Operating Voltages
- 24 Vdc ± 10 %
Output
- 0-10 V, Actual Value
- 0-20 mA (Actual Value)
- 0-5 V, Actual Value
- 4-20 mA (Actual Value)
- Burden Current Output: 600 ohms, Max.
- Maximum
Process Temperature
- 10° to 40° C (50° to 104° F)
Relay Output
- Two Relay Outputs: 1 A at 60 V, 60 VA
Repeatability
- ± 0.5 % of Full Scale
Response Time
- < 500 milliseconds
Seat / Seal Material
- Seal: EPDM
- Seal: FFKM
- Seal: FKM
Sensor Circuit
- Residual Ripple: < 2 %
Sensor, Probe Type
- Differential Pressure
Turndown
- 1:10
Viscosity
- 0.4 to 4 cSt
- Heat treatment
- Machine tools
- Fuel cell technology
- Packaging technology
- Material coating
- Bio reactors