Yodify Product Library
Instantly add the S8610U3009/U Universal Intermittent Pilot Ignition Module and 50,000+ more product series to your store or catalog  
Book Your Demo and See How
or create your store

S8610U3009/U Universal Intermittent Pilot Ignition Module

Brand: Resideo Technologies Inc

Universal intermittent pilot ignition module replaces multiple field installed intermittent pilot modules supplied by Resideo, Robertshaw, Johnson, and UTEC - HSC.

Uses existing intermittent pilot burner. Includes cross reference, instructions, and accessories for easy replacement.
Features
  • Replaces Over 400 White-Rogers, Robertshaw and Resideo Intermittent Pilot Ignition Modules
  • Provides Ignition Sequencing, Flame Monitoring and Safety Shutoff For Intermittent Pilot Warm Air Furnaces and Heating Appliances
  • Provides 100 Percent Pilot Gas Shutoff if Pilot Fails to Light; After 6-Minute Delay, Trial for Ignition is Repeated. Ignition Trial/Delay Sequence is Repeated Until the Appliance Lights or Call For Heat is Removed.
  • Includes Spark Cable Adapters to Allow Field Replacement of Both Resideo and Competitive Controls without Replacing Existing Spark Cable.

1 - 1 of 1 Part Numbers
S8610U3009/U
S8610U3009/U
Universal Intermittent Pilot Ignition Module
1 - 1 of 1 Part Numbers

Specifications

Dimensions

  • 3-15/16 in. high x 5-7/16 in. wide x 2-5/8 in. deep
  • 100 mm high x 138 mm wide x 67 mm deep

Includes

  • Damper connection with automatic vent damper plug

Electrical Ratings

  • 24 Vac

Frequency

  • 60 Hz

Approvals, Canadian Standards Association

  • Design Certified

Tradeline Value

  • Tradeline

Flame Failure Response Time

  • 2 seconds maximum

PrePurge

  • Configurable to 30 seconds or no prepurge

Ambient Temperature Range

  • -40 °C to +74 °C
  • -40 °F to +165 °F

Ignition System Type

  • Intermittent Pilot

Ignition Sequence

  • Continuous Retry

Typical Gas Control

  • VR8204
  • VR8304

Type of Gas

  • Natural or LP

Flame Sense

  • Single Rod or Two Rods

Ignition Source

  • Internal high voltage spark generator

Ignition Trials To Lockout

  • Continuous retry

Lockout Timing

  • Continuous retry

Ignition Trial Time

  • 15 or 90 sec

Maximum Valve Load at 24 Vac

  • 1A Pilot, 2A Main @ 165 F; 1A Pilot, 1A Main @ 175 F

Typical Ignition Hardware

  • Q345
  • Q3451
  • Q3452

Between Trial Time

  • 5 minute delay after failed trial for ignition.

  • For Use with Natural or LP Gas
  • For Use in Single Rod or Dual Rod/Remote Sense Applications

Documentation

Instantly populate your store or catalog 
CREATE YOUR SITE
or book a demo with the Yodify Team
show more