HART-Multiplexer Series 9192

Ambient Conditions

• Ambient temperature - -20 °C ... +70 °C (Single device) -20 °C ... +60 °C (Group assembly)
• Ambient temperature max. - +70 °C
• Ambient temperature max. note - Single device
• Ambient temperature max. note 2 - Group assembly
• Ambient temperature max.2 - +60 °C
• Ambient temperature min. - -20 °C
• Ambient temperature min. 2 - -20 °C
• Ambient temperature min. note - Single device
• Ambient temperature min. note 2 - Group assembly
• Electromagnetic compatibility - Tested to the following standards and regulations: EN 61326-1 Use in industrial environment; NAMUR NE 21
• Relative humidity max. - 95%
• Storage temperature - -40 °C ... +80 °C
• Storage temperature max. - +80 °C
• Storage temperature min. - -40 °C
• Use at the height of - < 2000 m

Auxiliary power

• Auxiliary power - 24 V DC
• Auxiliary power voltage range - 18 - 31,2 V
• Nominal current - 55.00 mA
• Nominal voltage - 24 V DC
• Polarity reversal protection - yes
• Power consumption - 1.35 W
• Voltage range residual ripple - ≤ 3,6 VSS

Components

• Safe interface area - RS-485

Electrical Data

• Connection electrical interfaces - Sub-D socket X1, 9-pole
• Connection field device interface (HART) - Ribbon cable, 14-pole (inclusive)
• Connection RS-485 Interface - Sub-D socket, 9-pole
• Electrical interface version - RS 485
• Fault control - Processor error: LED "PWR" flashes, HART communication disturbed: LED "ERR" flashes
• Field side of interfaces - FSK using 4 to 20 mA
• HART-multiplexer RS-485 interface - max. 31 (per bus segment)
• Interface data rate field side - HART FSK
• Number of channels field device interface (HART) - 16 or 32, setting via switch
• Number of RS-485 interfaces - 1
• Protocol RS-485 Interface - Compatible with Cornerstone, FDM, Occupational safety & health management system, PDM, PRM
• Signal field device interface (HART) - HART FSK
• Signal RS-485 Interface - RS-485
• Specification field device interface (HART) - HART Field Communication Protocol Rev. 7.x (downwards compatible to Rev. 4.0); FSK Physical Layer Specification (Rev. 7.x)

Explosion Protection

• Application range (zones) - 2, 22
• ATEX gas certificate - BVS 03 ATEX E 213 X
• Certificate EAC - TS RU S-DE.GB04.B.00353
• Certificates - ATEX (BVS), Brazil (ULB), Canada (FM), EAC (STV), IECEx (BVS), India (PESO), SIL (exida), USA (FM)
• Gas explosion protection ATEX - II 3 G Ex nA IIC T4 Gc
• Gas explosion protection EAC - 2 Ex nA IIC T4 Gc X
• Gas explosion protection IECEx - Ex nA IIC T4 Gc
• IECEX gas certificate - IECEx BVS 10.0042 X
• Installation in Division NEC 500 - (Class I, II, III) 2
• Ship approval - CCS, DNVGL

General

• Functional Description - The 9192 series HART multiplexer can connect up to 32 HART-capable field devices, such as transmitters or control valves, to asset management systems via RS-485 bus. The HART multiplexer is the ideal solution if you want to operate asset management systems and distributed control systems from different manufacturers in parallel or for enabling HART communication when using a PLC.
• Highlights - Multiplexers for HART field devices with 32 channels simple application: HART Mux master and HART Mux slave in one device can be used up to SIL 3
• Product Description - HART Multiplexer ISpac
• Product Type - 9192/32-10-10
• Title Product Variant Technical Data - 9192/32-10-10 HART-multiplexer
• WebCode - 9192A

Mechanical Data

• Degree of protection (IP) - IP30
• Enclosure material - Polyamide
• Fire resistance (UL 94) - V0
• Grid dimension - 35.20 mm
• Terminal degree of protection (IP) - IP20
• Weight - 0.100 kg

Mounting / Installation

• Mounting position - vertical horizontal
• Mounting type - DIN rail (NS35/15, NS35/7.5)

Output

• LFD relay - No