Yodify Product Library
Instantly add the R-Series SSI Absolute, Non-Contact Position Sensor and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
R-Series SSI Absolute, Non-Contact Position Sensor
Brand: Temposonics an Amphenol Company
SSI (Synchronous Serial Interface): The sensors fulfill all requirements of the SSI standard for absolute encoders.
Its position value is encoded in a binary format and transmitted at high speed to the control device.
Features- Rugged industrial sensor
- Linear and absolute measurement
- LEDs for sensor diagnostics
- Non-contact sensing with highest durability
- Direct SSI output, gray/binary
- Synchronous measurement for real-time sensing
Specifications
Approvals & Certifications
- CE
- EMC Electromagnetic (Emission EN 61000-6-4, Immunity EN 61000-6-2), EN 61000-4-2, 3, 4, 6, Level 3/4, Criterium A
- UL 61010-1
Communication
- Data Length: 8 to 32-bits
- Data Speed Baud Rate: 1 MBd to 400 KBd
- SSI (Synchronous Serial Interface) - Differential Signal in SSI Standard (RS-422)
Current
- Current Drain: 100 mA Typical
Display
- LED Diagnostic Display Beside Connector
Electrical Connectors
- 2 metres PUR-Cable without Connector
- 7-Pin Male Receptacle M16
Electrical Protection
- Overvoltage Protection: up to 36 Vdc
- Polarity Protection: up to -30 Vdc
Environmental Protection
- Ingress Protection (Profile): IP65
- Ingress Protection (Rod): IP67
- Ingress Protection RS: IP69K
- Ingress Protection: IP68 for Cable Outlet
Humidity
- Dew Point, Humidity: 90 % Relative Humidity, Non-Condensing
Hysteresis
- < 4 µm Typical 2 µm
Length
- Stroke Length (Profile): 0.98 to 196.9” (25 to 5,000 mm)
- Stroke Length (Rod): 0.98 to 299.2” (25 to 7,600 mm)
Linearity
- < ± 0.01 % of Full Scale (Min. ± 40 µm)
Materials of Construction
- Rod with Flange: AISI 304 Stainless Steel 1.4301 - Rod Model
- Sensor Stroke (Profile), Sensor Head: Aluminum
Metric Connection
- Threaded Flange M18 x 1.5
Mounting
- Profile: Movable Mounting Clamp
- U-Magnet, Removable & Position Magnet: Plate Mounting
- U-Magnet, Removable & Position Magnet: Screw Mount from Antimagnetical Material
Mounting Position
- Any Orientation
Operating Temperature
- -40° to 75° C (-40° to 167° F)
Pressure Rating
- psi: 10,150 (kPa: 70,000, bar: 700) Peak - Rod Model
- psi: 11,600 (kPa: 80,000, bar: 800) - Rod Model
- psi: 17,400 (kPa: 120,000, bar: 1,200) Peak Hydraulic Rod - Rod Model
- psi: 5,076 (kPa: 35,000, bar: 350) - Rod Model
Repeatability
- < ± 0.001 % of Full Scale (Min. ± 2.5 µm)
Resolution
- Position: 0.5 to 10 µm
Seat / Seal Material
- Seal: Fluoroelastomer
Shock
- 100 G Single Hit, IEC 60068-2-27
Supply Voltage
- 24 Vdc (-15 / 20 %)
Temperature Coefficient
- < 15 ppm/°C
Tolerance
- Linearity Tolerance (RP, 1,200 to 3,000 mm): Typical ± 45 µm, Max.
- Linearity Tolerance (RP, 3 to 5 m): Typical ± 85 µm, Max.
- Linearity Tolerance (RP/RH, 300 to 600 mm): Typical ± 20 µm, Max.
- Linearity Tolerance (RP/RH, > 600 to 1,200 mm): Typical ± 30 µm, Max.
UNF/UNC Connection
- Threaded Flange: 3/4”-16 UNF-3A
Vibration
- 15 G (10 to 2,000 Hz), IEC 60068-2-6
- Vibration Resistant: 30 G
Voltage
- Electric Strength: 500 Vdc (DC Ground to Machine Ground)