Yodify Product Library
Instantly add the HG10 and HGF10 Series Gas Screw Compressors and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
HG10 and HGF10 Series Gas Screw Compressors
Brand: LeROILeROI provides rotary screw compressors for gas to the oil and natural gas, and industrial and process industries.
Rotary screw gas compressors are very cost-effective for handling high volumes of gas in field gathering, vapor recovery, and a wide range of other applications.
Features- The HG10 can be belt driven or direct coupled to electric motors for maximum flexibility at minimum cost. The natural gas compressor shaft bearings can absorb the belt side load without additional pillow block bearing supports up to 30 HP (22 KW).
- The HGF10000 is suitable for direct coupling to engines and electric motors.
- Single-Stage operation from 20 PSIG (1.38 BARG) inlet to 350 PSIG (24.1 BARG) maximum is possible with the HG10 and HGF10 Series oil-flooded compressors. Compressor packages are therefore simple, reliable and inexpensive.
- The gas differential pressure provides oil circulation for proper lubrication at differential pressures over 70 PSI (4.82 BAR). An auxiliary oil pump is required on applications below 70 PSI (4.82 BAR) differential pressure.
- Discharge porting can be selected to match the internal compression to the application requirement for maximum compression efficiency.
- All iron or steel construction with no copper or copper alloys makes these compressors compatible with natural gas, sweet or sour.
Specifications
Brand
Rotor Diameter
- 108 mm (4.25 inches)
Rotor L/D
- 1.65
Rotor Description
- Twin Screw SRM Profile with Sealing Strips, 4 Lobe Male, 6 Lobe Female
Shaft Seal(s)
- Mechanical
Drive System
- HG10000 is suitable for direct coupling to electric motors or V-Belt Drive - oversized input shaft bearings for belt side load up to 30 HP (22 KW)
- Rotation - Facing Shaft - CCLW
- Drive Shaft 1.44” Dia. with 3/8” Square KeyInternal Helical Speed Increasing Gears (AGMA 11)
Materials
- Rotors - Ductile Iron 80-55-06
- Castings - Cast Iron G3000
- Bearings - Roller bearings on the inlet end and tapered roller bearings on the discharge end - alloy steel races, rolling elements and cages.
Weight
- 250 Pounds (113.3 KG)
- Gas Gathering
- Well Head Gas Compression
- Fuel Gas Boosting
- Vapor Recovery
- Inert Gas Boosting
- Landfill Gas