Yodify Product Library
Instantly add the Meter, Turbine, 1 Inch, Guardsman™ GL Series, Model K2C1 - Spare Parts and 50,000+ more product series to your store or catalog  
Book Your Demo and See How
or create your store

Meter, Turbine, 1 Inch, Guardsman™ GL Series, Model K2C1 - Spare Parts

Brand: TechnipFMC

The Smith Meter® Guardsman™ Series Turbine Meter is a bladed, rotor-type meter which utilizes an upstream, cantilevered stator to support the tungsten carbide, bearing-mounted rotor.

It is intended for a wide range of petroleum, petrochemical, and chemical custody transfer measurement applications, such as small product pipelines ranging from Natural Gas Liquids (NGL) to light fuel oils.

Smith Meter Guardsman Series L Models are rimless-type rotor turbine meters that use an upstream stator to support the rotor.

They are intended for use at loading racks to provide the highly accurate measurement required for custody transfer of petroleum liquids.

Note: Different features and requirements are available based on where a unit is manufactured.

Throughout this document, manufacturing locations are denoted in parentheses after a feature.

You must place your order with the noted location to receive a unit with the specific feature.
Features
  • 1.5" to 4" Guardsman™ (G) Series
    • Stainless Steel measuring chamber and internals
    • Locking stator prevents wear and improves performance
    • Tungsten carbide bearings system provides longlife on low lubricating fluids
    • Hydrodynamic thrust balance to minimize friction and wear on thrust bearings which allows for long service life and high accuracy
    • 125-250 AARH flange face finish
  • 1" to 4" Guardsman™ Series Loading Rack (L) Models Turbine Meters
    • Stainless-steel measuring chamber and internals
    • Locking stator prevents wear and improves performance
    • Stainless Steel ball bearings (LB models) and tungsten carbide journal bearings (LJ and LSJ models) provide long life on low lubricating fluids
    • Integral-strate-plate flow conditioner (LSJ models)
    • Horizontal or vertical installation
    • Turbine Meter Diagnostics when used with AccuLoad III

1 - 12 of 36 Part Numbers
006110-002
006110-002
Screw, 10-32 x ¼" (UL/CSA version only) - Item 29
006621-001
006621-001
Washer, ¼" Lock (ATEX version only) - Item 27
009544-401
009544-401
Screw, 10-32 x ¼" - Item 19
013403-200
013403-200
Gasket, Cover - Item 12
060060-001
060060-001
Nut, ¼"-20 (ATEX version only) - Item 24
230663-101
230663-101
Preamplifier: Preamplifier: PA-6, 12 to 24 VDC - Item 1
  • Recommended Stock
543192-203
543192-203
Clip, Retaining - Item 6
543195-200
543195-200
Label: UL/CSA - Item 11
543196-100
543196-100
Cover, Conduit Box: Cover, Conduit Box: UL/CSA - Item 9
543256-200
543256-200
Bearing, Ball Bearing, Ball Box, Conduit - Item 5
543539-101
543539-101
Stator Assembly - Item 21
  • Note 3: If problems are encountered during installation of stator, please contact the Factory, (814) 898-5000
543543-191
543543-191
Rotor Assembly: Rotor Assembly: Standard - Item 17
  • Recommended Stock
  • Note 2: Due to change in the design of this meter in August of 1987, it is necessary to determine whether your meter is of current or previous design. Standard serial numbers up to and including 5015, and special serial numbers up to and including 200779 are considered previous design. Numbers higher than those are current design. These numbers can be found on the nameplate of the meter and on the stator
1 - 12 of 36 Part Numbers

Specifications

Brand

Repeatability

  • ± 0.02 % over the normal flow range

End Connections

  • Class 150 and 300 American Society of Mechanical Engineers (ASME) B16.5, 125-250 Arithmetic Average Roughness Height (AARH) finish raised-face (RF) flanges
  • Class 150, 300, 600, 900 ASME B16.5, 125-250 AARH finish raised face (RF) flanges
  • PN 16, 25 and 40 DIN 2526 Form C flange
  • PN 63 and 100 DIN 2526 Form E flanges
Instantly populate your store or catalog 
CREATE YOUR SITE
or book a demo with the Yodify Team
show more