Yodify Product Library
Instantly add the S3 60 Hz Submersible Pumps and 50,000+ more product series to your store or catalog  
Book Your Demo and See How
or create your store

S3 60 Hz Submersible Pumps

Brand: Dab Pumps S.p.A

3” submersible multi-impeller pump for 3” or larger wells for pressurization, lifting water from underground, gardening and irrigation activities in residential building service.

Ready-to-use pump.

CONSTRUCTION FEATURES OF THE PUMP

Technopolymer impellers housed with stainless steel adjustment rings. Pump liner, shaft, coupling with motor, integrated suction filter and cable guard are in stainless steel.

Suction and delivery supports in micro-cast AISI 304 stainless steel. Removable built-in non-return valve in technopolymer. NSF61 certified
 
CONSTRUCTION FEATURES OF THE MOTOR

Two-pole asynchronous motor completely made of AISI 304 stainless steel.

Two wire version. The thrust block and bushes are cooled and lubricated with a mixture of water and glycol.

Rotor mounted on a Kingsbury type self-centering thrust block capable of withstanding high axial loads.

The stator is immersed in thermosetting insulating resin with high heat dissipation capacity and encapsulated in an airtight AISI 304 stainless steel casing.

Removable cable connector CSA approved, motor suitable for use with variable frequency drive (30 Hz - 60 Hz).

Specifications

Flow Rate

  • Up to 18 GPM

Head Up to

  • 538 feet

Maximum Immersion Depth

  • 490 feet

Type of Pumped Liquid

  • Clean, free of Solids and Abrasive Substances, Non-viscous, Non-aggressive, Non-crystallized and Chemically Neutral

Maximum Permitted Amount of Sand

  • 0.009 lb/ft³ (150 gr/m³ )

Liquid Temperature

  • From +32°F to +104°F

Output Connection

  • 1” ¼ NPT

Pump Maximum Diameter

  • 3.05"

Impeller/s Material

  • Technopolymer

Maximum Number of Starts

  • 20/hour

Protection Class

  • IP68

Motor Insulation Class

  • F

Single Phase Power Input

  • 1x230V (±6%) 60 Hz

Possible Type of Installation

  • In Vertical Position. If it is installed in horizontal position it is necessary to ensure a minimum load on the thrust unit and the cooling sleeve

Certification

  • Approved to UL, CSA & NSF Standards
Instantly populate your store or catalog 
CREATE YOUR SITE
or book a demo with the Yodify Team
show more