Yodify Product Library
Instantly add the RO Mini - Modular or Compact and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
RO Mini - Modular or Compact
Brand: Sea Recovery CorporationThe Sea Recovery PRO Mini Series are the smallest line of watermakers.
The low-hassle PRO Mini is engineered to fit anywhere.
Measuring at about 2 - 3 cubic feet, sail and small power boaters have the opportunity and the convenience of a Sea Recovery watermaker without space restrictions.
Smaller than a 20 gallon water tank, yet able to produce between 170 - 750 GPD; 644 - 2,839 LPD in capacity, this desalinator is the perfect seaworthy companion for the solo cruiser.
Weighing at most, 130 lbs, the PRO Mini is also more convenient than hauling around a full water tank that adds about 8 pounds per gallon to your boat.
To illustrate, if a 34 gallon tank was filled to capacity, that would create about 342 lbs additional weight to haul, which will put more stress on the engine, slow down speed, and increase fuel costs.
With the PRO Mini, compact boaters will carry minimal weight, save space, and cruise without limits to any destination they wish.
Featuring a simple interface, with push button operation, the PRO Mini can be monitored via the control panel or remote - optional.
Featuring unlimited features at your control, Semi-Automatic Functions, 6 illuminated LED status indication lamps for system operation, an optional weekly automatic fresh water flush and sequential starting of electric motors with manual override, this watermaker is an ideal for small power and sail boats.
1 - 8 of 8 Part Numbers
1 - 8 of 8 Part Numbers
Specifications
Brand
Applications
- Leisure
Chlorine Tolerance
- 0.1 ppm
Configuration
- Compact
- Modular
Dimension: Height
- 660 mm
- 26”
Dimension: Length
- 281 mm
- 11”
Dimension: Width
- 200 mm
- 8”
Electrical Requirements
- See Brochure Under Product Support
External Installation Water Connection
- N/A
Filters
- Pre & Post Treatment Stages, Including Monel Screen
Minimum Inlet Pressure Rating
- N/A
Performance
- ± 15 % at 850 psi / 56 bar, 77° F / 25° C & 35,000 ppm TDS Typical Sea Water
pH Range
- 3-11 (Typical Seawater PH is 8)
Power Options
- AC or DC
Pressure Adjustment
- Manual
Product Type
- Watermaker
Product Water Temperature
- Ambient to Feed Water Temperature
Pump Type
- Exclusive High Efficiency Booster Pump
Reverse Osmosis Membrane
- Single Pass Reverse Osmosis Membrane Element
- Spiral Wound
- Thin Film Composite
- High Rejection / High Yield Aromatic Tri-Polyamind
Salinity Monitoring
- Automatic Electronic Monitoring.Temperature Compensated with the Digital Continuous Readout.The Salinity Monitoring Components of the System Give A Continuous TDS Readout in ppm (Parts Per Million), are Temperature Compensated, & of a Fail-safe Design.
Salinity Range
- Designed for Seawater Use up to 50,000 ppm TDS (Nacl) (Typical Seawater Salinity is 35,000 ppm)
Salt Rejection
- 99.2 %, Average 99.4 %
System Feed Water
- 4.5 gpm / 17 Lpm (Depending on System)
System Operation
- Seawater @ 35,000 ppm & 77° F / 25° C, Nominal: 850 psi / 56.5 bar / 57.66 kg/cm²
System Pressure
- Maximum: 35 psi / 2.41 bar / 2.46 kg/cm²
- Feed Water Min.: 6 psi / .41 bar / .42 kg/cm²
Water Flow Rate
- 145-700 Gal/day
- 644-2,839 L/day
Weight
- 32 to 59 kg
- 70 to 130 lbs
Water Feed Temperature Range
- Minimum 33° F / .5° C Max. 122° F / 50° C