Yodify Product Library
Instantly add the 8201 pH Measuring System and 50,000+ more product series to your store or catalog
Book Your Demo and See How
or create your store
8201 pH Measuring System
Brand: Burkert Fluid Control SystemsThe Type 8201 pH measuring system is suitable for measuring absolute pH values in liquids between pH 0 and pH 12 at medium temperatures of up to 140° C (284° F) and process pressures of maximum psi: 87.02 (kPa: 600, bar: 6). Due to its hygienic design and the robust glass-free layout, this type is particularly suitable for use in hygienic processes.
An example would be the production of foods and active ingredients, during which the pH value of liquid mediums - including those which are viscous or contain solids - is measured. The pH probe's extremely smooth enamel surface inhibits the medium from sticking and is very easy to clean in line.
Due to its robust design and high temperature and chemical tolerance, the probe stays in the process even during a CIP purification. This means that expensive retractable fittings can be dispensed with.
Features- Special glass-free probe for measuring pH to be connected to Type 8619 multiCELL
- Sterile design, CIP-compatible, in-line sterilizable
- Robust and unbreakable construction
- Long service life, long calibration intervals
- Especially suitable when preparing foods and drinks
1 - 12 of 22 Part Numbers
554 849
- Model - Probe
- Type - pH Probe-enamel without Adaptation
554 850
- Model - Electrolyte Vessel
- Material - Electrolyte Vessel, Stainless Steel
554 851
- Model - Electrolyte Vessel
- Material - Electrolyte Vessel, Stainless Steel, with Level Switch
554 852
- Model - Operating Liquids
- Liquid - Electrolyte KCI, Sterilised, 1 Litre Plastic Bottle (Conform to FDA)
554 854
- Model - Operating Liquids
- Liquid - Plastic Bottle with Septum
554 855
- Model - Connection Cables
- Cable Length - Connection Cable for pH Probe Enamel, 3 metres Long
554 856
- Model - Connection Cables
- Cable Length - Connection Cable for pH Probe Enamel, 5 metres
554 857
- Model - Connection Cables
- Cable Length - Connection Cable for pH Probe Enamel, 10 metres
554 858
- Model - Fittings Type 8201 Attachment Cables
- Type - Welding Tab DN 25, 40 mm, Straight, 1.4404
554 859
- Model - Fittings Type 8201 Attachment Cables
- Type - Welding Tab DN 25, 40 mm, Sloped, 1.4404
554 860
- Model - Fittings Type 8201 Attachment Cables
- Type - Welding Tab EHEDG, DN 30, 60 mm, Straight, 1.4404
554 861
- Model - Fittings Type 8201 Attachment Cables
- Type - Blind Plug for Welding Tab EHEDG, DN 30, 1.4404
1 - 12 of 22 Part Numbers
Specifications
Ambient Temperature Range
- 0° to 50° C (32° to 122° F)
Approvals & Certifications
- EHEDG
- FDA
BSP Connection
- G 1-1/4” Male
Cable Length
- 16.40 feet (5 metres) - Max.
Conductivity
- Minimal Conductivity: 1 µS
Diaphragm Material
- Ceramic Enamelled
Electrical Connectors
- 6-Pin Gold-Plated
- M12
- PG13.5
Environmental Protection
- IP68
Measuring Error
- 0.1 pH, Max.
Measuring Range
- 0 to 10 pH (up to 12 pH)
Pressure Range
- psi: -14 to 87 (kPa: -100 to 600, bar: -1 to 6)
Process Connection Material
- 316L Stainless Steel, 1.4404
Process Temperature
- 0° to 140° C (32° to 284° F)
Repeatability
- 0.05 pH
RTD Type
- Pt1000
Seat / Seal Material
- Seal: EPDM
Sensor, Probe Material
- Probe Head: PVDF
Welded Connection
- DN 25 Weld End
- DN 300 Weld End
Wetted Materials
- Enamelled Steel Pipe